The 'mipssim' is not a real hardware, it is a simulator.
There is an ISA MMIO space mapped at 0x1fd00000, however
this is not a real ISA bus (no ISA IRQ). So can not use
the TYPE_ISA_SERIAL device...
Instead we have been using a plain MMIO device, but named
it IO.
TYPE_SERIAL_IO is a superset of TYPE_SERIAL_MM, using
regshift=0 and endianness=DEVICE_LITTLE_ENDIAN.
Directly use the TYPE_SERIAL_MM device, enforcing the
regshift/endianness values. 'regshift' default is already
'0'. 'endianness' is meaningless for 8-bit accesses.
Note, there is no migration problem, because TYPE_SERIAL_IO
was not migrated.
Suggested-by: Peter Maydell <peter.mayd...@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com>
---
hw/mips/mipssim.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/hw/mips/mipssim.c b/hw/mips/mipssim.c
index 1b3b762203..853bbaca58 100644
--- a/hw/mips/mipssim.c
+++ b/hw/mips/mipssim.c
@@ -216,9 +216,11 @@ mips_mipssim_init(MachineState *machine)
* MIPS CPU INT2, which is interrupt 4.
*/
if (serial_hd(0)) {
- DeviceState *dev = qdev_new(TYPE_SERIAL_IO);
+ DeviceState *dev = qdev_new(TYPE_SERIAL_MM);
qdev_prop_set_chr(dev, "chardev", serial_hd(0));
+ qdev_prop_set_uint8(dev, "regshift", 0);
+ qdev_prop_set_uint8(dev, "endianness", DEVICE_LITTLE_ENDIAN);
qdev_set_legacy_instance_id(dev, 0x3f8, 2);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, env->irq[4]);
--
2.21.3
