On Sun, Jun 28, 2020 at 7:24 AM Peter Maydell <peter.mayd...@linaro.org> wrote:
>
> The spitz board has been around a long time, and still has a fair number
> of hard-coded tab characters in it. We're about to do some work on
> this source file, so start out by expanding out the tabs.
>
> This commit is a pure whitespace only change.
>
> Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
Reviewed-by: Alistair Francis <alistair.fran...@wdc.com>
Alistair
> ---
> Couple of checkpatch errors due to the QUEUE_KEY macro which can
> be ignored as this is just a detabify.
> ---
> hw/arm/spitz.c | 156 ++++++++++++++++++++++++-------------------------
> 1 file changed, 78 insertions(+), 78 deletions(-)
>
> diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
> index fc18212e686..9eaedab79b5 100644
> --- a/hw/arm/spitz.c
> +++ b/hw/arm/spitz.c
> @@ -34,25 +34,25 @@
> #include "cpu.h"
>
> #undef REG_FMT
> -#define REG_FMT "0x%02lx"
> +#define REG_FMT "0x%02lx"
>
> /* Spitz Flash */
> -#define FLASH_BASE 0x0c000000
> -#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */
> -#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */
> -#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */
> -#define FLASH_ECCCNTR 0x0c /* ECC byte counter */
> -#define FLASH_ECCCLRR 0x10 /* Clear ECC */
> -#define FLASH_FLASHIO 0x14 /* Flash I/O */
> -#define FLASH_FLASHCTL 0x18 /* Flash Control */
> +#define FLASH_BASE 0x0c000000
> +#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */
> +#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */
> +#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */
> +#define FLASH_ECCCNTR 0x0c /* ECC byte counter */
> +#define FLASH_ECCCLRR 0x10 /* Clear ECC */
> +#define FLASH_FLASHIO 0x14 /* Flash I/O */
> +#define FLASH_FLASHCTL 0x18 /* Flash Control */
>
> -#define FLASHCTL_CE0 (1 << 0)
> -#define FLASHCTL_CLE (1 << 1)
> -#define FLASHCTL_ALE (1 << 2)
> -#define FLASHCTL_WP (1 << 3)
> -#define FLASHCTL_CE1 (1 << 4)
> -#define FLASHCTL_RYBY (1 << 5)
> -#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
> +#define FLASHCTL_CE0 (1 << 0)
> +#define FLASHCTL_CLE (1 << 1)
> +#define FLASHCTL_ALE (1 << 2)
> +#define FLASHCTL_WP (1 << 3)
> +#define FLASHCTL_CE1 (1 << 4)
> +#define FLASHCTL_RYBY (1 << 5)
> +#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
>
> #define TYPE_SL_NAND "sl-nand"
> #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND)
> @@ -74,12 +74,12 @@ static uint64_t sl_read(void *opaque, hwaddr addr,
> unsigned size)
> int ryby;
>
> switch (addr) {
> -#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
> +#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 <<
> to))
> case FLASH_ECCLPLB:
> return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6)
> |
> BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7,
> 7);
>
> -#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to))
> +#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 <<
> to))
> case FLASH_ECCLPUB:
> return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6)
> |
> BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3,
> 7);
> @@ -191,8 +191,8 @@ static void sl_nand_realize(DeviceState *dev, Error
> **errp)
>
> /* Spitz Keyboard */
>
> -#define SPITZ_KEY_STROBE_NUM 11
> -#define SPITZ_KEY_SENSE_NUM 7
> +#define SPITZ_KEY_STROBE_NUM 11
> +#define SPITZ_KEY_SENSE_NUM 7
>
> static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {
> 12, 17, 91, 34, 36, 38, 39
> @@ -214,11 +214,11 @@ static int spitz_keymap[SPITZ_KEY_SENSE_NUM +
> 1][SPITZ_KEY_STROBE_NUM] = {
> { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 },
> };
>
> -#define SPITZ_GPIO_AK_INT 13 /* Remote control */
> -#define SPITZ_GPIO_SYNC 16 /* Sync button */
> -#define SPITZ_GPIO_ON_KEY 95 /* Power button */
> -#define SPITZ_GPIO_SWA 97 /* Lid */
> -#define SPITZ_GPIO_SWB 96 /* Tablet mode */
> +#define SPITZ_GPIO_AK_INT 13 /* Remote control */
> +#define SPITZ_GPIO_SYNC 16 /* Sync button */
> +#define SPITZ_GPIO_ON_KEY 95 /* Power button */
> +#define SPITZ_GPIO_SWA 97 /* Lid */
> +#define SPITZ_GPIO_SWB 96 /* Tablet mode */
>
> /* The special buttons are mapped to unused keys */
> static const int spitz_gpiomap[5] = {
> @@ -300,7 +300,7 @@ static void spitz_keyboard_keydown(SpitzKeyboardState *s,
> int keycode)
> #define SPITZ_MOD_CTRL (1 << 8)
> #define SPITZ_MOD_FN (1 << 9)
>
> -#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
> +#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
>
> static void spitz_keyboard_handler(void *opaque, int keycode)
> {
> @@ -308,25 +308,25 @@ static void spitz_keyboard_handler(void *opaque, int
> keycode)
> uint16_t code;
> int mapcode;
> switch (keycode) {
> - case 0x2a: /* Left Shift */
> + case 0x2a: /* Left Shift */
> s->modifiers |= 1;
> break;
> case 0xaa:
> s->modifiers &= ~1;
> break;
> - case 0x36: /* Right Shift */
> + case 0x36: /* Right Shift */
> s->modifiers |= 2;
> break;
> case 0xb6:
> s->modifiers &= ~2;
> break;
> - case 0x1d: /* Control */
> + case 0x1d: /* Control */
> s->modifiers |= 4;
> break;
> case 0x9d:
> s->modifiers &= ~4;
> break;
> - case 0x38: /* Alt */
> + case 0x38: /* Alt */
> s->modifiers |= 8;
> break;
> case 0xb8:
> @@ -536,14 +536,14 @@ static void spitz_keyboard_realize(DeviceState *dev,
> Error **errp)
>
> /* LCD backlight controller */
>
> -#define LCDTG_RESCTL 0x00
> -#define LCDTG_PHACTRL 0x01
> -#define LCDTG_DUTYCTRL 0x02
> -#define LCDTG_POWERREG0 0x03
> -#define LCDTG_POWERREG1 0x04
> -#define LCDTG_GPOR3 0x05
> -#define LCDTG_PICTRL 0x06
> -#define LCDTG_POLCTRL 0x07
> +#define LCDTG_RESCTL 0x00
> +#define LCDTG_PHACTRL 0x01
> +#define LCDTG_DUTYCTRL 0x02
> +#define LCDTG_POWERREG0 0x03
> +#define LCDTG_POWERREG1 0x04
> +#define LCDTG_GPOR3 0x05
> +#define LCDTG_PICTRL 0x06
> +#define LCDTG_POLCTRL 0x07
>
> typedef struct {
> SSISlave ssidev;
> @@ -623,12 +623,12 @@ static void spitz_lcdtg_realize(SSISlave *dev, Error
> **errp)
>
> /* SSP devices */
>
> -#define CORGI_SSP_PORT 2
> +#define CORGI_SSP_PORT 2
>
> -#define SPITZ_GPIO_LCDCON_CS 53
> -#define SPITZ_GPIO_ADS7846_CS 14
> -#define SPITZ_GPIO_MAX1111_CS 20
> -#define SPITZ_GPIO_TP_INT 11
> +#define SPITZ_GPIO_LCDCON_CS 53
> +#define SPITZ_GPIO_ADS7846_CS 14
> +#define SPITZ_GPIO_MAX1111_CS 20
> +#define SPITZ_GPIO_TP_INT 11
>
> static DeviceState *max1111;
>
> @@ -659,13 +659,13 @@ static void corgi_ssp_gpio_cs(void *opaque, int line,
> int level)
> s->enable[line] = !level;
> }
>
> -#define MAX1111_BATT_VOLT 1
> -#define MAX1111_BATT_TEMP 2
> -#define MAX1111_ACIN_VOLT 3
> +#define MAX1111_BATT_VOLT 1
> +#define MAX1111_BATT_TEMP 2
> +#define MAX1111_ACIN_VOLT 3
>
> -#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */
> -#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
> -#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
> +#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */
> +#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
> +#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
>
> static void spitz_adc_temp_on(void *opaque, int line, int level)
> {
> @@ -735,11 +735,11 @@ static void spitz_microdrive_attach(PXA2xxState *cpu,
> int slot)
>
> /* Wm8750 and Max7310 on I2C */
>
> -#define AKITA_MAX_ADDR 0x18
> -#define SPITZ_WM_ADDRL 0x1b
> -#define SPITZ_WM_ADDRH 0x1a
> +#define AKITA_MAX_ADDR 0x18
> +#define SPITZ_WM_ADDRL 0x1b
> +#define SPITZ_WM_ADDRH 0x1a
>
> -#define SPITZ_GPIO_WM 5
> +#define SPITZ_GPIO_WM 5
>
> static void spitz_wm8750_addr(void *opaque, int line, int level)
> {
> @@ -806,20 +806,20 @@ static void spitz_out_switch(void *opaque, int line,
> int level)
> }
> }
>
> -#define SPITZ_SCP_LED_GREEN 1
> -#define SPITZ_SCP_JK_B 2
> -#define SPITZ_SCP_CHRG_ON 3
> -#define SPITZ_SCP_MUTE_L 4
> -#define SPITZ_SCP_MUTE_R 5
> -#define SPITZ_SCP_CF_POWER 6
> -#define SPITZ_SCP_LED_ORANGE 7
> -#define SPITZ_SCP_JK_A 8
> -#define SPITZ_SCP_ADC_TEMP_ON 9
> -#define SPITZ_SCP2_IR_ON 1
> -#define SPITZ_SCP2_AKIN_PULLUP 2
> -#define SPITZ_SCP2_BACKLIGHT_CONT 7
> -#define SPITZ_SCP2_BACKLIGHT_ON 8
> -#define SPITZ_SCP2_MIC_BIAS 9
> +#define SPITZ_SCP_LED_GREEN 1
> +#define SPITZ_SCP_JK_B 2
> +#define SPITZ_SCP_CHRG_ON 3
> +#define SPITZ_SCP_MUTE_L 4
> +#define SPITZ_SCP_MUTE_R 5
> +#define SPITZ_SCP_CF_POWER 6
> +#define SPITZ_SCP_LED_ORANGE 7
> +#define SPITZ_SCP_JK_A 8
> +#define SPITZ_SCP_ADC_TEMP_ON 9
> +#define SPITZ_SCP2_IR_ON 1
> +#define SPITZ_SCP2_AKIN_PULLUP 2
> +#define SPITZ_SCP2_BACKLIGHT_CONT 7
> +#define SPITZ_SCP2_BACKLIGHT_ON 8
> +#define SPITZ_SCP2_MIC_BIAS 9
>
> static void spitz_scoop_gpio_setup(PXA2xxState *cpu,
> DeviceState *scp0, DeviceState *scp1)
> @@ -839,15 +839,15 @@ static void spitz_scoop_gpio_setup(PXA2xxState *cpu,
> qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);
> }
>
> -#define SPITZ_GPIO_HSYNC 22
> -#define SPITZ_GPIO_SD_DETECT 9
> -#define SPITZ_GPIO_SD_WP 81
> -#define SPITZ_GPIO_ON_RESET 89
> -#define SPITZ_GPIO_BAT_COVER 90
> -#define SPITZ_GPIO_CF1_IRQ 105
> -#define SPITZ_GPIO_CF1_CD 94
> -#define SPITZ_GPIO_CF2_IRQ 106
> -#define SPITZ_GPIO_CF2_CD 93
> +#define SPITZ_GPIO_HSYNC 22
> +#define SPITZ_GPIO_SD_DETECT 9
> +#define SPITZ_GPIO_SD_WP 81
> +#define SPITZ_GPIO_ON_RESET 89
> +#define SPITZ_GPIO_BAT_COVER 90
> +#define SPITZ_GPIO_CF1_IRQ 105
> +#define SPITZ_GPIO_CF1_CD 94
> +#define SPITZ_GPIO_CF2_IRQ 106
> +#define SPITZ_GPIO_CF2_CD 93
>
> static int spitz_hsync;
>
> @@ -907,8 +907,8 @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
> /* Board init. */
> enum spitz_model_e { spitz, akita, borzoi, terrier };
>
> -#define SPITZ_RAM 0x04000000
> -#define SPITZ_ROM 0x00800000
> +#define SPITZ_RAM 0x04000000
> +#define SPITZ_ROM 0x00800000
>
> static struct arm_boot_info spitz_binfo = {
> .loader_start = PXA2XX_SDRAM_BASE,
> --
> 2.20.1
>
>
