On 6/22/20 8:34 PM, Philippe Mathieu-Daudé wrote:
> Emit a trace event when a GPIO change its state.
>
> Example booting obmc-phosphor-image:
>
> $ qemu-system-arm -M witherspoon-bmc -trace pca955x_gpio_change
> 1592690552.687372:pca955x_gpio_change pca1 GPIO id:0 status: 0 -> 1
> 1592690552.690169:pca955x_gpio_change pca1 GPIO id:1 status: 0 -> 1
> 1592690552.691673:pca955x_gpio_change pca1 GPIO id:2 status: 0 -> 1
> 1592690552.696886:pca955x_gpio_change pca1 GPIO id:3 status: 0 -> 1
> 1592690552.698614:pca955x_gpio_change pca1 GPIO id:13 status: 0 -> 1
> 1592690552.699833:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
> 1592690552.700842:pca955x_gpio_change pca1 GPIO id:15 status: 0 -> 1
> 1592690683.841921:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
> 1592690683.861660:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
> 1592690684.371460:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
> 1592690684.882115:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
> 1592690685.391411:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
> 1592690685.901391:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
> 1592690686.411678:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0
> 1592690686.921279:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1
>
> We notice the GPIO #14 (front-power LED) starts to blink.
>
> This LED is described in the witherspoon device-tree [*]:
>
> front-power {
> retain-state-shutdown;
> default-state = "keep";
> gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
> };
>
> [*]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n140
>
> Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Reviewed-by: Cédric Le Goater <c...@kaod.org>
> ---
> hw/misc/pca9552.c | 15 +++++++++++++++
> hw/misc/trace-events | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c
> index 13f5ed0da4..5997eef8b2 100644
> --- a/hw/misc/pca9552.c
> +++ b/hw/misc/pca9552.c
> @@ -82,6 +82,21 @@ static void pca955x_display_pins_status(PCA955xState *s,
> buf[i] = '\0';
> trace_pca955x_gpio_status(s->description, buf);
> }
> + if (trace_event_get_state_backends(TRACE_PCA955X_GPIO_CHANGE)) {
> + for (i = 0; i < k->pin_count; i++) {
> + if (extract32(pins_changed, i, 1)) {
> + unsigned new_state = extract32(pins_status, i, 1);
> +
> + /*
> + * We display the state using the PCA logic ("active-high").
> + * This is not the state of the LED, which signal might be
> + * wired "active-low" on the board.
> + */
> + trace_pca955x_gpio_change(s->description, i,
> + !new_state, new_state);
> + }
> + }
> + }
> }
>
> static void pca955x_update_pin_input(PCA955xState *s)
> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> index 9282c60dd9..7ccf683dd1 100644
> --- a/hw/misc/trace-events
> +++ b/hw/misc/trace-events
> @@ -209,3 +209,4 @@ grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB
> PnP read addr:0x%03"PRIx6
>
> # pca9552.c
> pca955x_gpio_status(const char *description, const char *buf) "%s GPIOs 0-15
> [%s]"
> +pca955x_gpio_change(const char *description, unsigned id, unsigned
> prev_state, unsigned current_state) "%s GPIO id:%u status: %u -> %u"
>
