On Tue, Jun 2, 2020 at 4:22 AM LIU Zhiwei <zhiwei_...@c-sky.com> wrote:
>
>
>
> On 2020/5/29 6:14, Alistair Francis wrote:
> > This is the initial commit of the Ibex UART device. Serial TX is
> > working, while RX has been implemeneted but untested.
> >
> > This is based on the documentation from:
> > https://docs.opentitan.org/hw/ip/uart/doc/
> >
> > Signed-off-by: Alistair Francis <alistair.fran...@wdc.com>
> > ---
> > include/hw/char/ibex_uart.h | 110 ++++++++
> > hw/char/ibex_uart.c | 492 ++++++++++++++++++++++++++++++++++++
> > MAINTAINERS | 2 +
> > hw/char/Makefile.objs | 1 +
> > hw/riscv/Kconfig | 4 +
> > 5 files changed, 609 insertions(+)
> > create mode 100644 include/hw/char/ibex_uart.h
> > create mode 100644 hw/char/ibex_uart.c
> >
> > diff --git a/include/hw/char/ibex_uart.h b/include/hw/char/ibex_uart.h
> > new file mode 100644
> > index 0000000000..2bec772615
> > --- /dev/null
> > +++ b/include/hw/char/ibex_uart.h
> > @@ -0,0 +1,110 @@
> > +/*
> > + * QEMU lowRISC Ibex UART device
> > + *
> > + * Copyright (c) 2020 Western Digital
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > copy
> > + * of this software and associated documentation files (the "Software"),
> > to deal
> > + * in the Software without restriction, including without limitation the
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#ifndef HW_IBEX_UART_H
> > +#define HW_IBEX_UART_H
> > +
> > +#include "hw/sysbus.h"
> > +#include "chardev/char-fe.h"
> > +#include "qemu/timer.h"
> > +
> > +#define IBEX_UART_INTR_STATE 0x00
> > + #define INTR_STATE_TX_WATERMARK (1 << 0)
> > + #define INTR_STATE_RX_WATERMARK (1 << 1)
> > + #define INTR_STATE_TX_EMPTY (1 << 2)
> > + #define INTR_STATE_RX_OVERFLOW (1 << 3)
> > +#define IBEX_UART_INTR_ENABLE 0x04
> > +#define IBEX_UART_INTR_TEST 0x08
> > +
> > +#define IBEX_UART_CTRL 0x0c
> > + #define UART_CTRL_TX_ENABLE (1 << 0)
> > + #define UART_CTRL_RX_ENABLE (1 << 1)
> > + #define UART_CTRL_NF (1 << 2)
> > + #define UART_CTRL_SLPBK (1 << 4)
> > + #define UART_CTRL_LLPBK (1 << 5)
> > + #define UART_CTRL_PARITY_EN (1 << 6)
> > + #define UART_CTRL_PARITY_ODD (1 << 7)
> > + #define UART_CTRL_RXBLVL (3 << 8)
> > + #define UART_CTRL_NCO (0xFFFF << 16)
> > +
> > +#define IBEX_UART_STATUS 0x10
> > + #define UART_STATUS_TXFULL (1 << 0)
> > + #define UART_STATUS_RXFULL (1 << 1)
> > + #define UART_STATUS_TXEMPTY (1 << 2)
> > + #define UART_STATUS_RXIDLE (1 << 4)
> > + #define UART_STATUS_RXEMPTY (1 << 5)
> > +
> > +#define IBEX_UART_RDATA 0x14
> > +#define IBEX_UART_WDATA 0x18
> > +
> > +#define IBEX_UART_FIFO_CTRL 0x1c
> > + #define FIFO_CTRL_RXRST (1 << 0)
> > + #define FIFO_CTRL_TXRST (1 << 1)
> > + #define FIFO_CTRL_RXILVL (7 << 2)
> > + #define FIFO_CTRL_RXILVL_SHIFT (2)
> > + #define FIFO_CTRL_TXILVL (3 << 5)
> > + #define FIFO_CTRL_TXILVL_SHIFT (5)
> > +
> > +#define IBEX_UART_FIFO_STATUS 0x20
> > +#define IBEX_UART_OVRD 0x24
> > +#define IBEX_UART_VAL 0x28
> > +#define IBEX_UART_TIMEOUT_CTRL 0x2c
> > +
> > +#define IBEX_UART_TX_FIFO_SIZE 16
> > +
> > +#define TYPE_IBEX_UART "ibex-uart"
> > +#define IBEX_UART(obj) \
> > + OBJECT_CHECK(IbexUartState, (obj), TYPE_IBEX_UART)
> > +
> > +typedef struct {
> > + /* <private> */
> > + SysBusDevice parent_obj;
> > +
> > + /* <public> */
> > + MemoryRegion mmio;
> > +
> > + uint8_t tx_fifo[IBEX_UART_TX_FIFO_SIZE];
> > + uint32_t tx_level;
> > +
> > + QEMUTimer *fifo_trigger_handle;
> > + uint64_t char_tx_time;
> > +
> > + uint32_t uart_intr_state;
> > + uint32_t uart_intr_enable;
> > + uint32_t uart_ctrl;
> > + uint32_t uart_status;
> > + uint32_t uart_rdata;
> > + uint32_t uart_fifo_ctrl;
> > + uint32_t uart_fifo_status;
> > + uint32_t uart_ovrd;
> > + uint32_t uart_val;
> > + uint32_t uart_timeout_ctrl;
> > +
> > + CharBackend chr;
> > + qemu_irq tx_watermark;
> > + qemu_irq rx_watermark;
> > + qemu_irq tx_empty;
> > + qemu_irq rx_overflow;
> > +} IbexUartState;
> > +#endif /* HW_IBEX_UART_H */
> > diff --git a/hw/char/ibex_uart.c b/hw/char/ibex_uart.c
> > new file mode 100644
> > index 0000000000..c416325d73
> > --- /dev/null
> > +++ b/hw/char/ibex_uart.c
> > @@ -0,0 +1,492 @@
> > +/*
> > + * QEMU lowRISC Ibex UART device
> > + *
> > + * Copyright (c) 2020 Western Digital
> > + *
> > + * For details check the documentation here:
> > + * https://docs.opentitan.org/hw/ip/uart/doc/
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > copy
> > + * of this software and associated documentation files (the "Software"),
> > to deal
> > + * in the Software without restriction, including without limitation the
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/char/ibex_uart.h"
> > +#include "hw/irq.h"
> > +#include "hw/qdev-properties.h"
> > +#include "migration/vmstate.h"
> > +#include "qemu/log.h"
> > +#include "qemu/module.h"
> > +
> > +static void ibex_uart_update_irqs(IbexUartState *s)
> > +{
> > + if (s->uart_intr_state & s->uart_intr_enable &
> > INTR_STATE_TX_WATERMARK) {
> > + qemu_set_irq(s->tx_watermark, 1);
> > + } else {
> > + qemu_set_irq(s->tx_watermark, 0);
> > + }
> > +
> > + if (s->uart_intr_state & s->uart_intr_enable &
> > INTR_STATE_RX_WATERMARK) {
> > + qemu_set_irq(s->rx_watermark, 1);
> > + } else {
> > + qemu_set_irq(s->rx_watermark, 0);
> > + }
> > +
> > + if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_EMPTY) {
> > + qemu_set_irq(s->tx_empty, 1);
> > + } else {
> > + qemu_set_irq(s->tx_empty, 0);
> > + }
> > +
> > + if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_OVERFLOW)
> > {
> > + qemu_set_irq(s->rx_overflow, 1);
> > + } else {
> > + qemu_set_irq(s->rx_overflow, 0);
> > + }
> > +}
> > +
> > +static int ibex_uart_can_receive(void *opaque)
> > +{
> > + IbexUartState *s = opaque;
> > +
> > + if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
> > + return 1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void ibex_uart_receive(void *opaque, const uint8_t *buf, int size)
> > +{
> > + IbexUartState *s = opaque;
> > + uint8_t rx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_RXILVL)
> > + >> FIFO_CTRL_RXILVL_SHIFT;
> > +
> > + s->uart_rdata = *buf;
> > +
> > + s->uart_status &= ~UART_STATUS_RXIDLE;
> > + s->uart_status &= ~UART_STATUS_RXEMPTY;
> > +
> > + if (size > rx_fifo_level) {
> > + s->uart_intr_state |= INTR_STATE_RX_WATERMARK;
> > + }
> > +
> > + ibex_uart_update_irqs(s);
> > +}
> > +
> > +static gboolean ibex_uart_xmit(GIOChannel *chan, GIOCondition cond,
> > + void *opaque)
> > +{
> > + IbexUartState *s = opaque;
> > + uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
> > + >> FIFO_CTRL_TXILVL_SHIFT;
> > + int ret;
> > +
> > + /* instant drain the fifo when there's no back-end */
> > + if (!qemu_chr_fe_backend_connected(&s->chr)) {
> > + s->tx_level = 0;
> > + return FALSE;
> > + }
> > +
> > + if (!s->tx_level) {
> > + s->uart_status &= UART_STATUS_TXFULL;
> Maybe s->uart_status &= ~UART_STATUS_TXFULL;
Good spot, fixed.
> > + s->uart_status |= UART_STATUS_TXEMPTY;
> > + s->uart_intr_state |= INTR_STATE_TX_EMPTY;
> > + s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
> > + ibex_uart_update_irqs(s);
> > + return FALSE;
> > + }
> > +
> > + ret = qemu_chr_fe_write(&s->chr, s->tx_fifo, s->tx_level);
> > +
> > + if (ret >= 0) {
> > + s->tx_level -= ret;
> > + memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_level);
> > + }
> > +
> > + if (s->tx_level) {
> > + guint r = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
> > + ibex_uart_xmit, s);
> > + if (!r) {
> > + s->tx_level = 0;
> > + return FALSE;
> > + }
> > + }
> > +
> > + /* Clear the TX Full bit */
> > + if (s->tx_level != IBEX_UART_TX_FIFO_SIZE) {
> > + s->uart_status &= ~UART_STATUS_TXFULL;
> > + }
> > +
> > + /* Disable the TX_WATERMARK IRQ */
> > + if (s->tx_level < tx_fifo_level) {
> > + s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
> > + }
> > +
> > + /* Set TX empty */
> > + if (s->tx_level == 0) {
> > + s->uart_status |= UART_STATUS_TXEMPTY;
> > + s->uart_intr_state |= INTR_STATE_TX_EMPTY;
> > + }
> > +
> > + ibex_uart_update_irqs(s);
> > + return FALSE;
> > +}
> > +
> > +static void uart_write_tx_fifo(IbexUartState *s, const uint8_t *buf,
> > + int size)
> > +{
> > + uint64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > + uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
> > + >> FIFO_CTRL_TXILVL_SHIFT;
> > +
> > + if (size > IBEX_UART_TX_FIFO_SIZE - s->tx_level) {
> > + size = IBEX_UART_TX_FIFO_SIZE - s->tx_level;
> > + qemu_log_mask(LOG_GUEST_ERROR, "ibex_uart: TX FIFO overflow");
> > + }
> > +
> > + memcpy(s->tx_fifo + s->tx_level, buf, size);
> > + s->tx_level += size;
> > +
> > + if (s->tx_level > 0) {
> > + s->uart_status &= ~UART_STATUS_TXEMPTY;
> > + }
> > +
> > + if (s->tx_level >= tx_fifo_level) {
> > + s->uart_intr_state |= INTR_STATE_TX_WATERMARK;
> > + ibex_uart_update_irqs(s);
> > + }
> > +
> > + if (s->tx_level == IBEX_UART_TX_FIFO_SIZE) {
> > + s->uart_status |= UART_STATUS_TXFULL;
> > + }
> > +
> > + timer_mod(s->fifo_trigger_handle, current_time +
> > + (s->char_tx_time * 4));
> > +}
> > +
> > +static void ibex_uart_reset(DeviceState *dev)
> > +{
> > + IbexUartState *s = IBEX_UART(dev);
> > +
> > + s->uart_intr_state = 0x00000000;
> > + s->uart_intr_state = 0x00000000;
> > + s->uart_intr_enable = 0x00000000;
> > + s->uart_ctrl = 0x00000000;
> > + s->uart_status = 0x0000003c;
> > + s->uart_rdata = 0x00000000;
> > + s->uart_fifo_ctrl = 0x00000000;
> > + s->uart_fifo_status = 0x00000000;
> > + s->uart_ovrd = 0x00000000;
> > + s->uart_val = 0x00000000;
> > + s->uart_timeout_ctrl = 0x00000000;
> > +
> > + s->tx_level = 0;
> > +
> > + s->char_tx_time = (NANOSECONDS_PER_SECOND / 230400) * 10;
> > +
> > + ibex_uart_update_irqs(s);
> > +}
> > +
> > +static uint64_t ibex_uart_read(void *opaque, hwaddr addr,
> > + unsigned int size)
> > +{
> > + IbexUartState *s = opaque;
> > + uint64_t retvalue = 0;
> > +
> > + switch (addr) {
> > + case IBEX_UART_INTR_STATE:
> > + retvalue = s->uart_intr_state;
> > + break;
> > + case IBEX_UART_INTR_ENABLE:
> > + retvalue = s->uart_intr_enable;
> > + break;
> > + case IBEX_UART_INTR_TEST:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: wdata is write only\n", __func__);
> > + break;
> > +
> > + case IBEX_UART_CTRL:
> > + retvalue = s->uart_ctrl;
> > + break;
> > + case IBEX_UART_STATUS:
> > + retvalue = s->uart_status;
> > + break;
> > +
> > + case IBEX_UART_RDATA:
> > + retvalue = s->uart_rdata;
> > + if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
> > + qemu_chr_fe_accept_input(&s->chr);
> > +
> > + s->uart_status |= UART_STATUS_RXIDLE;
> > + s->uart_status |= UART_STATUS_RXEMPTY;
> > + }
> > + break;
> > + case IBEX_UART_WDATA:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: wdata is write only\n", __func__);
> > + break;
> > +
> > + case IBEX_UART_FIFO_CTRL:
> > + retvalue = s->uart_fifo_ctrl;
> > + break;
> > + case IBEX_UART_FIFO_STATUS:
> > + retvalue = s->uart_fifo_status;
> > +
> > + retvalue |= s->tx_level & 0x1F;
> > +
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: RX fifos are not supported\n", __func__);
> > + break;
> > +
> > + case IBEX_UART_OVRD:
> > + retvalue = s->uart_ovrd;
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: ovrd is not supported\n", __func__);
> > + break;
> > + case IBEX_UART_VAL:
> > + retvalue = s->uart_val;
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: val is not supported\n", __func__);
> > + break;
> > + case IBEX_UART_TIMEOUT_CTRL:
> > + retvalue = s->uart_timeout_ctrl;
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: timeout_ctrl is not supported\n", __func__);
> > + break;
> > + default:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
> > + return 0;
> > + }
> > +
> > + return retvalue;
> > +}
> > +
> > +static void ibex_uart_write(void *opaque, hwaddr addr,
> > + uint64_t val64, unsigned int size)
> > +{
> > + IbexUartState *s = opaque;
> > + uint32_t value = val64;
> > +
> > + switch (addr) {
> > + case IBEX_UART_INTR_STATE:
> > + /* Write 1 clear */
> > + s->uart_intr_state &= ~value;
> > + ibex_uart_update_irqs(s);
> > + break;
> > + case IBEX_UART_INTR_ENABLE:
> > + s->uart_intr_enable = value;
> > + ibex_uart_update_irqs(s);
> > + break;
> > + case IBEX_UART_INTR_TEST:
> > + s->uart_intr_state |= value;
> > + ibex_uart_update_irqs(s);
> > + break;
> > +
> > + case IBEX_UART_CTRL:
> > + s->uart_ctrl = value;
> > +
> > + if (value & UART_CTRL_NF) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_NF is not supported\n", __func__);
> > + }
> > + if (value & UART_CTRL_SLPBK) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_SLPBK is not supported\n",
> > __func__);
> > + }
> > + if (value & UART_CTRL_LLPBK) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_LLPBK is not supported\n",
> > __func__);
> > + }
> > + if (value & UART_CTRL_PARITY_EN) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_PARITY_EN is not supported\n",
> > + __func__);
> > + }
> > + if (value & UART_CTRL_PARITY_ODD) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_PARITY_ODD is not supported\n",
> > + __func__);
> > + }
> > + if (value & UART_CTRL_RXBLVL) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: UART_CTRL_RXBLVL is not supported\n",
> > __func__);
> > + }
> > + if (value & UART_CTRL_NCO) {
> > + uint64_t baud = ((value & UART_CTRL_NCO) >> 16);
> > + baud *= 1000;
> > + baud /= 2 ^ 20;
> > +
> > + s->char_tx_time = (NANOSECONDS_PER_SECOND / baud) * 10;
> > + }
> > + break;
> > + case IBEX_UART_STATUS:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: status is read only\n", __func__);
> > + break;
> > +
> > + case IBEX_UART_RDATA:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: rdata is read only\n", __func__);
> > + break;
> > + case IBEX_UART_WDATA:
> > + uart_write_tx_fifo(s, (uint8_t *) &value, 1);
> > + break;
> > +
> > + case IBEX_UART_FIFO_CTRL:
> > + s->uart_fifo_ctrl = value;
> > +
> > + if (value & FIFO_CTRL_RXRST) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: RX fifos are not supported\n", __func__);
> > + }
> > + if (value & FIFO_CTRL_TXRST) {
> > + s->tx_level = 0;
> > + }
> > + break;
> > + case IBEX_UART_FIFO_STATUS:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: fifo_status is read only\n", __func__);
> > + break;
> > +
> > + case IBEX_UART_OVRD:
> > + s->uart_ovrd = value;
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: ovrd is not supported\n", __func__);
> > + break;
> > + case IBEX_UART_VAL:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: val is read only\n", __func__);
> > + break;
> > + case IBEX_UART_TIMEOUT_CTRL:
> > + s->uart_timeout_ctrl = value;
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: timeout_ctrl is not supported\n", __func__);
> > + break;
> > + default:
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
> > + }
> > +}
> > +
> > +static void fifo_trigger_update(void *opaque)
> > +{
> > + IbexUartState *s = opaque;
> > +
> > + if (s->uart_ctrl & UART_CTRL_TX_ENABLE) {
> > + ibex_uart_xmit(NULL, G_IO_OUT, s);
> > + }
> > +}
> > +
> > +static const MemoryRegionOps ibex_uart_ops = {
> > + .read = ibex_uart_read,
> > + .write = ibex_uart_write,
> > + .endianness = DEVICE_NATIVE_ENDIAN,
> > + .impl.min_access_size = 4,
> > + .impl.max_access_size = 4,
> > +};
> > +
> > +static int cadence_uart_post_load(void *opaque, int version_id)
> Not a good name.
Also fixed.
Alistair
> > +{
> > + IbexUartState *s = opaque;
> > +
> > + ibex_uart_update_irqs(s);
> > + return 0;
> > +}
> > +
> > +static const VMStateDescription vmstate_ibex_uart = {
> > + .name = TYPE_IBEX_UART,
> > + .version_id = 1,
> > + .minimum_version_id = 1,
> > + .post_load = cadence_uart_post_load,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_UINT8_ARRAY(tx_fifo, IbexUartState,
> > + IBEX_UART_TX_FIFO_SIZE),
> > + VMSTATE_UINT32(tx_level, IbexUartState),
> > + VMSTATE_UINT64(char_tx_time, IbexUartState),
> > + VMSTATE_TIMER_PTR(fifo_trigger_handle, IbexUartState),
> > + VMSTATE_UINT32(uart_intr_state, IbexUartState),
> > + VMSTATE_UINT32(uart_intr_enable, IbexUartState),
> > + VMSTATE_UINT32(uart_ctrl, IbexUartState),
> > + VMSTATE_UINT32(uart_status, IbexUartState),
> > + VMSTATE_UINT32(uart_rdata, IbexUartState),
> > + VMSTATE_UINT32(uart_fifo_ctrl, IbexUartState),
> > + VMSTATE_UINT32(uart_fifo_status, IbexUartState),
> > + VMSTATE_UINT32(uart_ovrd, IbexUartState),
> > + VMSTATE_UINT32(uart_val, IbexUartState),
> > + VMSTATE_UINT32(uart_timeout_ctrl, IbexUartState),
> > + VMSTATE_END_OF_LIST()
> > + }
> > +};
> > +
> > +static Property ibex_uart_properties[] = {
> > + DEFINE_PROP_CHR("chardev", IbexUartState, chr),
> > + DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > +static void ibex_uart_init(Object *obj)
> > +{
> > + IbexUartState *s = IBEX_UART(obj);
> > +
> > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_watermark);
> > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_watermark);
> > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_empty);
> > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_overflow);
> > +
> > + memory_region_init_io(&s->mmio, obj, &ibex_uart_ops, s,
> > + TYPE_IBEX_UART, 0x400);
> > + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
> > +}
> > +
> > +static void ibex_uart_realize(DeviceState *dev, Error **errp)
> > +{
> > + IbexUartState *s = IBEX_UART(dev);
> > +
> > + s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
> > + fifo_trigger_update, s);
> > +
> > + qemu_chr_fe_set_handlers(&s->chr, ibex_uart_can_receive,
> > + ibex_uart_receive, NULL, NULL,
> > + s, NULL, true);
> > +}
> > +
> > +static void ibex_uart_class_init(ObjectClass *klass, void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > + dc->reset = ibex_uart_reset;
> > + dc->realize = ibex_uart_realize;
> > + dc->vmsd = &vmstate_ibex_uart;
> > + device_class_set_props(dc, ibex_uart_properties);
> > +}
> > +
> > +static const TypeInfo ibex_uart_info = {
> > + .name = TYPE_IBEX_UART,
> > + .parent = TYPE_SYS_BUS_DEVICE,
> > + .instance_size = sizeof(IbexUartState),
> > + .instance_init = ibex_uart_init,
> > + .class_init = ibex_uart_class_init,
> > +};
> > +
> > +static void ibex_uart_register_types(void)
> > +{
> > + type_register_static(&ibex_uart_info);
> > +}
> > +
> > +type_init(ibex_uart_register_types)
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 3e7d9cb0a5..a1ce186a7e 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1245,7 +1245,9 @@ M: Alistair Francis <alistair.fran...@wdc.com>
> > L: qemu-ri...@nongnu.org
> > S: Supported
> > F: hw/riscv/opentitan.c
> > +F: hw/char/ibex_uart.c
> > F: include/hw/riscv/opentitan.h
> > +F: include/hw/char/ibex_uart.h
> >
> > SH4 Machines
> > ------------
> > diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> > index 9e9a6c1aff..633996be5b 100644
> > --- a/hw/char/Makefile.objs
> > +++ b/hw/char/Makefile.objs
> > @@ -12,6 +12,7 @@ common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
> > common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
> > common-obj-$(CONFIG_XEN) += xen_console.o
> > common-obj-$(CONFIG_CADENCE) += cadence_uart.o
> > +common-obj-$(CONFIG_IBEX) += ibex_uart.o
> >
> > common-obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
> > common-obj-$(CONFIG_COLDFIRE) += mcf_uart.o
> > diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> > index 94d19571f7..28947ef3e0 100644
> > --- a/hw/riscv/Kconfig
> > +++ b/hw/riscv/Kconfig
> > @@ -4,6 +4,9 @@ config HTIF
> > config HART
> > bool
> >
> > +config IBEX
> > + bool
> > +
> > config SIFIVE
> > bool
> > select MSI_NONBROKEN
> > @@ -29,6 +32,7 @@ config SPIKE
> >
> > config OPENTITAN
> > bool
> > + select IBEX
> > select HART
> > select UNIMP
> >
>
>
