Acked-by: Igor Mammedov <imamm...@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com>
---
qapi/machine.json | 154 +++++++++++++++++++++++++++
qapi/misc.json | 154 ---------------------------
include/hw/acpi/acpi_dev_interface.h | 2 +-
hw/acpi/core.c | 2 +-
hw/acpi/cpu.c | 2 +-
hw/acpi/memory_hotplug.c | 2 +-
6 files changed, 158 insertions(+), 158 deletions(-)
diff --git a/qapi/machine.json b/qapi/machine.json
index 7420c4f5ee..04b124be67 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1061,3 +1061,157 @@
##
{ 'event': 'BALLOON_CHANGE',
'data': { 'actual': 'int' } }
+
+##
+# @AcpiTableOptions:
+#
+# Specify an ACPI table on the command line to load.
+#
+# At most one of @file and @data can be specified. The list of files specified
+# by any one of them is loaded and concatenated in order. If both are omitted,
+# @data is implied.
+#
+# Other fields / optargs can be used to override fields of the generic ACPI
+# table header; refer to the ACPI specification 5.0, section 5.2.6 System
+# Description Table Header. If a header field is not overridden, then the
+# corresponding value from the concatenated blob is used (in case of @file), or
+# it is filled in with a hard-coded value (in case of @data).
+#
+# String fields are copied into the matching ACPI member from lowest address
+# upwards, and silently truncated / NUL-padded to length.
+#
+# @sig: table signature / identifier (4 bytes)
+#
+# @rev: table revision number (dependent on signature, 1 byte)
+#
+# @oem_id: OEM identifier (6 bytes)
+#
+# @oem_table_id: OEM table identifier (8 bytes)
+#
+# @oem_rev: OEM-supplied revision number (4 bytes)
+#
+# @asl_compiler_id: identifier of the utility that created the table
+# (4 bytes)
+#
+# @asl_compiler_rev: revision number of the utility that created the
+# table (4 bytes)
+#
+# @file: colon (:) separated list of pathnames to load and
+# concatenate as table data. The resultant binary blob is expected to
+# have an ACPI table header. At least one file is required. This field
+# excludes @data.
+#
+# @data: colon (:) separated list of pathnames to load and
+# concatenate as table data. The resultant binary blob must not have an
+# ACPI table header. At least one file is required. This field excludes
+# @file.
+#
+# Since: 1.5
+##
+{ 'struct': 'AcpiTableOptions',
+ 'data': {
+ '*sig': 'str',
+ '*rev': 'uint8',
+ '*oem_id': 'str',
+ '*oem_table_id': 'str',
+ '*oem_rev': 'uint32',
+ '*asl_compiler_id': 'str',
+ '*asl_compiler_rev': 'uint32',
+ '*file': 'str',
+ '*data': 'str' }}
+
+##
+# @MEM_UNPLUG_ERROR:
+#
+# Emitted when memory hot unplug error occurs.
+#
+# @device: device name
+#
+# @msg: Informative message
+#
+# Since: 2.4
+#
+# Example:
+#
+# <- { "event": "MEM_UNPLUG_ERROR"
+# "data": { "device": "dimm1",
+# "msg": "acpi: device unplug for unsupported device"
+# },
+# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
+#
+##
+{ 'event': 'MEM_UNPLUG_ERROR',
+ 'data': { 'device': 'str', 'msg': 'str' } }
+
+##
+# @ACPISlotType:
+#
+# @DIMM: memory slot
+# @CPU: logical CPU slot (since 2.7)
+##
+{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
+
+##
+# @ACPIOSTInfo:
+#
+# OSPM Status Indication for a device
+# For description of possible values of @source and @status fields
+# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
+#
+# @device: device ID associated with slot
+#
+# @slot: slot ID, unique per slot of a given @slot-type
+#
+# @slot-type: type of the slot
+#
+# @source: an integer containing the source event
+#
+# @status: an integer containing the status code
+#
+# Since: 2.1
+##
+{ 'struct': 'ACPIOSTInfo',
+ 'data' : { '*device': 'str',
+ 'slot': 'str',
+ 'slot-type': 'ACPISlotType',
+ 'source': 'int',
+ 'status': 'int' } }
+
+##
+# @query-acpi-ospm-status:
+#
+# Return a list of ACPIOSTInfo for devices that support status
+# reporting via ACPI _OST method.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-acpi-ospm-status" }
+# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
"source": 1, "status": 0},
+# { "slot": "1", "slot-type": "DIMM", "source": 0, "status":
0},
+# { "slot": "2", "slot-type": "DIMM", "source": 0, "status":
0},
+# { "slot": "3", "slot-type": "DIMM", "source": 0, "status":
0}
+# ]}
+#
+##
+{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
+
+##
+# @ACPI_DEVICE_OST:
+#
+# Emitted when guest executes ACPI _OST method.
+#
+# @info: OSPM Status Indication
+#
+# Since: 2.1
+#
+# Example:
+#
+# <- { "event": "ACPI_DEVICE_OST",
+# "data": { "device": "d1", "slot": "0",
+# "slot-type": "DIMM", "source": 1, "status": 0 } }
+#
+##
+{ 'event': 'ACPI_DEVICE_OST',
+ 'data': { 'info': 'ACPIOSTInfo' } }
diff --git a/qapi/misc.json b/qapi/misc.json
index 49ca97f712..ecceba9d32 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -1000,64 +1000,6 @@
##
{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
-##
-# @AcpiTableOptions:
-#
-# Specify an ACPI table on the command line to load.
-#
-# At most one of @file and @data can be specified. The list of files specified
-# by any one of them is loaded and concatenated in order. If both are omitted,
-# @data is implied.
-#
-# Other fields / optargs can be used to override fields of the generic ACPI
-# table header; refer to the ACPI specification 5.0, section 5.2.6 System
-# Description Table Header. If a header field is not overridden, then the
-# corresponding value from the concatenated blob is used (in case of @file), or
-# it is filled in with a hard-coded value (in case of @data).
-#
-# String fields are copied into the matching ACPI member from lowest address
-# upwards, and silently truncated / NUL-padded to length.
-#
-# @sig: table signature / identifier (4 bytes)
-#
-# @rev: table revision number (dependent on signature, 1 byte)
-#
-# @oem_id: OEM identifier (6 bytes)
-#
-# @oem_table_id: OEM table identifier (8 bytes)
-#
-# @oem_rev: OEM-supplied revision number (4 bytes)
-#
-# @asl_compiler_id: identifier of the utility that created the table
-# (4 bytes)
-#
-# @asl_compiler_rev: revision number of the utility that created the
-# table (4 bytes)
-#
-# @file: colon (:) separated list of pathnames to load and
-# concatenate as table data. The resultant binary blob is expected to
-# have an ACPI table header. At least one file is required. This field
-# excludes @data.
-#
-# @data: colon (:) separated list of pathnames to load and
-# concatenate as table data. The resultant binary blob must not have an
-# ACPI table header. At least one file is required. This field excludes
-# @file.
-#
-# Since: 1.5
-##
-{ 'struct': 'AcpiTableOptions',
- 'data': {
- '*sig': 'str',
- '*rev': 'uint8',
- '*oem_id': 'str',
- '*oem_table_id': 'str',
- '*oem_rev': 'uint32',
- '*asl_compiler_id': 'str',
- '*asl_compiler_rev': 'uint32',
- '*file': 'str',
- '*data': 'str' }}
-
##
# @CommandLineParameterType:
#
@@ -1250,102 +1192,6 @@
##
{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
-##
-# @MEM_UNPLUG_ERROR:
-#
-# Emitted when memory hot unplug error occurs.
-#
-# @device: device name
-#
-# @msg: Informative message
-#
-# Since: 2.4
-#
-# Example:
-#
-# <- { "event": "MEM_UNPLUG_ERROR"
-# "data": { "device": "dimm1",
-# "msg": "acpi: device unplug for unsupported device"
-# },
-# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
-##
-{ 'event': 'MEM_UNPLUG_ERROR',
- 'data': { 'device': 'str', 'msg': 'str' } }
-
-##
-# @ACPISlotType:
-#
-# @DIMM: memory slot
-# @CPU: logical CPU slot (since 2.7)
-##
-{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
-
-##
-# @ACPIOSTInfo:
-#
-# OSPM Status Indication for a device
-# For description of possible values of @source and @status fields
-# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
-#
-# @device: device ID associated with slot
-#
-# @slot: slot ID, unique per slot of a given @slot-type
-#
-# @slot-type: type of the slot
-#
-# @source: an integer containing the source event
-#
-# @status: an integer containing the status code
-#
-# Since: 2.1
-##
-{ 'struct': 'ACPIOSTInfo',
- 'data' : { '*device': 'str',
- 'slot': 'str',
- 'slot-type': 'ACPISlotType',
- 'source': 'int',
- 'status': 'int' } }
-
-##
-# @query-acpi-ospm-status:
-#
-# Return a list of ACPIOSTInfo for devices that support status
-# reporting via ACPI _OST method.
-#
-# Since: 2.1
-#
-# Example:
-#
-# -> { "execute": "query-acpi-ospm-status" }
-# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
"source": 1, "status": 0},
-# { "slot": "1", "slot-type": "DIMM", "source": 0, "status":
0},
-# { "slot": "2", "slot-type": "DIMM", "source": 0, "status":
0},
-# { "slot": "3", "slot-type": "DIMM", "source": 0, "status":
0}
-# ]}
-#
-##
-{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
-
-##
-# @ACPI_DEVICE_OST:
-#
-# Emitted when guest executes ACPI _OST method.
-#
-# @info: OSPM Status Indication
-#
-# Since: 2.1
-#
-# Example:
-#
-# <- { "event": "ACPI_DEVICE_OST",
-# "data": { "device": "d1", "slot": "0",
-# "slot-type": "DIMM", "source": 1, "status": 0 } }
-#
-##
-{ 'event': 'ACPI_DEVICE_OST',
- 'data': { 'info': 'ACPIOSTInfo' } }
-
##
# @ReplayMode:
#
diff --git a/include/hw/acpi/acpi_dev_interface.h
b/include/hw/acpi/acpi_dev_interface.h
index a2a12af9b9..a1b63d51db 100644
--- a/include/hw/acpi/acpi_dev_interface.h
+++ b/include/hw/acpi/acpi_dev_interface.h
@@ -1,7 +1,7 @@
#ifndef ACPI_DEV_INTERFACE_H
#define ACPI_DEV_INTERFACE_H
-#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-machine.h"
#include "qom/object.h"
#include "hw/boards.h"
#include "hw/qdev-core.h"
diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index 45cbed49ab..4f8d90f50b 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -27,7 +27,7 @@
#include "qapi/error.h"
#include "qapi/opts-visitor.h"
#include "qapi/qapi-events-run-state.h"
-#include "qapi/qapi-visit-misc.h"
+#include "qapi/qapi-visit-machine.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu/option.h"
diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c
index 3d6a500fb7..532d8a6e4b 100644
--- a/hw/acpi/cpu.c
+++ b/hw/acpi/cpu.c
@@ -3,7 +3,7 @@
#include "migration/vmstate.h"
#include "hw/acpi/cpu.h"
#include "qapi/error.h"
-#include "qapi/qapi-events-misc.h"
+#include "qapi/qapi-events-machine.h"
#include "trace.h"
#include "sysemu/numa.h"
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 8d2e82240f..aa454f5cb2 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -7,7 +7,7 @@
#include "migration/vmstate.h"
#include "trace.h"
#include "qapi/error.h"
-#include "qapi/qapi-events-misc.h"
+#include "qapi/qapi-events-machine.h"
#define MEMORY_SLOTS_NUMBER "MDNR"
#define MEMORY_HOTPLUG_IO_REGION "HPMR"
--
2.21.3
