On 3/12/20 7:58 AM, LIU Zhiwei wrote:
> + if (a->vm && s->vl_eq_vlmax) { \
> + tcg_gen_gvec_##GVSUF(8 << s->sew, vreg_ofs(s, a->rd), \
> + vreg_ofs(s, a->rs2), vreg_ofs(s, a->rs1), \
> + MAXSZ(s), MAXSZ(s)); \
The first argument here should be just s->sew.
You should have see the assert fire:
tcg_debug_assert(vece <= MO_64);
It would be nice to pull out the bulk of GEN_OPIVV_GVEC_TRANS as a function,
and pass in tcg_gen_gvec_* as a function pointer, and fns as a pointer.
In general, I prefer the functions that are generated by macros like this to
have exactly one executable statement -- the call to the helper that does all
of the work using the arguments provided. That way a maximum number of lines
are available for stepping with the debugger.
> + data = FIELD_DP32(data, VDATA, MLEN, s->mlen);
> \
> + data = FIELD_DP32(data, VDATA, VM, a->vm);
> \
> + data = FIELD_DP32(data, VDATA, LMUL, s->lmul);
> \
Why are these replicated in each trans_* function, and not done in opiv?_trans,
where the rest of the descriptor is created?
> +/* OPIVX without GVEC IR */
> +#define GEN_OPIVX_TRANS(NAME, CHECK) \
> +static bool trans_##NAME(DisasContext *s, arg_rmrr *a) \
> +{ \
> + if (CHECK(s, a)) { \
> + uint32_t data = 0; \
> + static gen_helper_opivx const fns[4] = { \
> + gen_helper_##NAME##_b, gen_helper_##NAME##_h, \
> + gen_helper_##NAME##_w, gen_helper_##NAME##_d, \
> + }; \
> + \
> + data = FIELD_DP32(data, VDATA, MLEN, s->mlen); \
> + data = FIELD_DP32(data, VDATA, VM, a->vm); \
> + data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \
> + return opivx_trans(a->rd, a->rs1, a->rs2, data, fns[s->sew], s); \
> + } \
> + return false; \
> +}
> +
> +GEN_OPIVX_TRANS(vrsub_vx, opivx_check)
Note that you *can* generate vector code for this,
you just have to write your own helpers.
E.g.
static void gen_vec_rsub8_i64(TCGv_i64 d, TCGv_i64 a, TCGv_i64 a)
{
tcg_gen_vec_sub8_i64(d, b, a);
}
// etc, reversing the arguments and passing on to sub.
static const GVecGen2s rsub_op[4] = {
{ .fni8 = tcg_gen_vec_rsub8_i64,
.fniv = tcg_gen_rsub_vec,
.fno = gen_helper_gvec_rsubs8,
.opt_opc = vecop_list_sub,
.vece = MO_8 },
{ .fni8 = tcg_gen_vec_rsub16_i64,
.fniv = tcg_gen_rsub_vec,
.fno = gen_helper_gvec_rsubs16,
.opt_opc = vecop_list_sub,
.vece = MO_16 },
{ .fni4 = tcg_gen_rsub_i32,
.fniv = tcg_gen_rsub_vec,
.fno = gen_helper_gvec_rsubs32,
.opt_opc = vecop_list_sub,
.vece = MO_32 },
{ .fni8 = tcg_gen_rsub_i64,
.fniv = tcg_gen_rsub_vec,
.fno = gen_helper_gvec_rsubs64,
.opt_opc = vecop_list_sub,
.prefer_i64 = TCG_TARGET_REG_BITS == 64,
.vece = MO_64 },
};
static void gen_gvec_rsubs(unsigned vece, uint32_t dofs,
uint32_t aofs, TCGv_i64 c,
uint32_t oprsz, uint32_t maxsz)
{
tcg_debug_assert(vece <= MO_64);
tcg_gen_gvec_2s(dofs, aofs, oprsz, maxsz, c, &rsub_op[vece]);
}
static void gen_gvec_rsubi(unsigned vece, uint32_t dofs,
uint32_t aofs, int64_t c,
uint32_t oprsz, uint32_t maxsz)
{
tcg_debug_assert(vece <= MO_64);
tcg_gen_gvec_2i(dofs, aofs, oprsz, maxsz, c, &rsub_op[vece]);
}
> +/* generate the helpers for OPIVV */
> +#define GEN_VEXT_VV(NAME, ESZ, DSZ, CLEAR_FN) \
> +void HELPER(NAME)(void *vd, void *v0, void *vs1, \
> + void *vs2, CPURISCVState *env, uint32_t desc) \
> +{ \
> + uint32_t vlmax = vext_maxsz(desc) / ESZ; \
> + uint32_t mlen = vext_mlen(desc); \
> + uint32_t vm = vext_vm(desc); \
> + uint32_t vl = env->vl; \
> + uint32_t i; \
> + for (i = 0; i < vl; i++) { \
> + if (!vm && !vext_elem_mask(v0, mlen, i)) { \
> + continue; \
> + } \
> + do_##NAME(vd, vs1, vs2, i); \
> + } \
> + if (i != 0) { \
> + CLEAR_FN(vd, vl, vl * DSZ, vlmax * DSZ); \
> + } \
> +}
> +
> +GEN_VEXT_VV(vadd_vv_b, 1, 1, clearb)
> +GEN_VEXT_VV(vadd_vv_h, 2, 2, clearh)
> +GEN_VEXT_VV(vadd_vv_w, 4, 4, clearl)
> +GEN_VEXT_VV(vadd_vv_d, 8, 8, clearq)
> +GEN_VEXT_VV(vsub_vv_b, 1, 1, clearb)
> +GEN_VEXT_VV(vsub_vv_h, 2, 2, clearh)
> +GEN_VEXT_VV(vsub_vv_w, 4, 4, clearl)
> +GEN_VEXT_VV(vsub_vv_d, 8, 8, clearq)
The body of GEN_VEXT_VV can be an inline function, calling the helper functions
that you generated above.
> +/*
> + * If XLEN < SEW, the value from the x register is sign-extended to SEW bits.
> + * So (target_long)s1 is need. (T1)(target_long)s1 gives the real operator
> type.
> + * (TX1)(T1)(target_long)s1 expands the operator type of widen operations
> + * or narrow operations
> + */
> +#define OPIVX2(NAME, TD, T1, T2, TX1, TX2, HD, HS2, OP) \
> +static void do_##NAME(void *vd, target_ulong s1, void *vs2, int i) \
> +{ \
> + TX2 s2 = *((T2 *)vs2 + HS2(i)); \
> + *((TD *)vd + HD(i)) = OP(s2, (TX1)(T1)(target_long)s1); \
> +}
Why not just make the type of s1 be target_long in the parameter?
> +/* generate the helpers for instructions with one vector and one sclar */
> +#define GEN_VEXT_VX(NAME, ESZ, DSZ, CLEAR_FN) \
> +void HELPER(NAME)(void *vd, void *v0, target_ulong s1, \
> + void *vs2, CPURISCVState *env, uint32_t desc) \
> +{ \
> + uint32_t vlmax = vext_maxsz(desc) / ESZ; \
> + uint32_t mlen = vext_mlen(desc); \
> + uint32_t vm = vext_vm(desc); \
> + uint32_t vl = env->vl; \
> + uint32_t i; \
> + \
> + for (i = 0; i < vl; i++) { \
> + if (!vm && !vext_elem_mask(v0, mlen, i)) { \
> + continue; \
> + } \
> + do_##NAME(vd, s1, vs2, i); \
> + } \
> + if (i != 0) { \
> + CLEAR_FN(vd, vl, vl * DSZ, vlmax * DSZ); \
> + } \
> +}
Likewise an inline function.
r~
