On Mon, 09 Mar 2020 19:54:20 +0900,
Philippe Mathieu-Daudé wrote:
>
> On 3/9/20 7:30 AM, Yoshinori Sato wrote:
> > On Mon, 09 Mar 2020 01:20:05 +0900,
> > Philippe Mathieu-Daudé wrote:
> >>
> >> On 2/24/20 3:19 PM, Yoshinori Sato wrote:
> >>> From: Philippe Mathieu-Daudé <phi...@redhat.com>
> >>>
> >>> Add two tests for the rx-virt machine, based on the recommended test
> >>> setup from Yoshinori Sato:
> >>> https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
> >>>
> >>> - U-Boot prompt
> >>> - Linux kernel with Sash shell
> >>>
> >>> These are very quick tests:
> >>>
> >>> $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
> >>> JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
> >>> JOB LOG :
> >>> /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
> >>> (1/2)
> >>> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot:
> >>> PASS (0.11 s)
> >>> (2/2)
> >>> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux:
> >>> PASS (0.45 s)
> >>> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT
> >>> 0 | CANCEL 0
> >>>
> >>> Tests can also be run with:
> >>>
> >>> $ avocado --show=console run -t arch:rx
> >>> tests/acceptance/boot_linux_console.py
> >>> console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 -
> >>> 21:56:06 +0900)
> >>> console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc
> >>> version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST
> >>> 2019
> >>> console: Built 1 zonelists, mobility grouping on. Total pages: 8128
> >>> ...
> >>> console: SuperH (H)SCI(F) driver initialized
> >>> console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud =
> >>> 0) is a sci
> >>> console: console [ttySC0] enabled
> >>> console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud =
> >>> 0) is a sci
> >>>
> >>> Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com>
> >>> Based-on: 20190517045136.3509-1-richard.hender...@linaro.org
> >>> "RX architecture support"
> >>> Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
> >>> ---
> >>> tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
> >>> 1 file changed, 46 insertions(+)
> >>>
> >>> diff --git a/tests/acceptance/boot_linux_console.py
> >>> b/tests/acceptance/boot_linux_console.py
> >>> index 34d37eba3b..367cf480a5 100644
> >>> --- a/tests/acceptance/boot_linux_console.py
> >>> +++ b/tests/acceptance/boot_linux_console.py
> >>> @@ -686,3 +686,49 @@ class BootLinuxConsole(Test):
> >>> tar_hash = '49e88d9933742f0164b60839886c9739cb7a0d34'
> >>> self.vm.add_args('-cpu', 'dc233c')
> >>> self.do_test_advcal_2018('02', tar_hash,
> >>> 'santas-sleigh-ride.elf')
> >>> +
> >>> + def test_rx_uboot(self):
> >>> + """
> >>> + :avocado: tags=arch:rx
> >>> + :avocado: tags=machine:rx-virt
> >>> + :avocado: tags=endian:little
> >>> + """
> >>> + uboot_url =
> >>> ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
> >>> + uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
> >>> + uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
> >>> + uboot_path = archive.uncompress(uboot_path, self.workdir)
> >>> +
> >>> + self.vm.set_machine('rx-virt')
> >>> + self.vm.set_console()
> >>> + self.vm.add_args('-bios', uboot_path,
> >>> + '-no-reboot')
> >>> + self.vm.launch()
> >>> + uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
> >>> + self.wait_for_console_pattern(uboot_version)
> >>> + gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105
> >>> (experimental)'
> >>> + # FIXME limit baudrate on chardev, else we type too fast
> >>> + #self.exec_command_and_wait_for_pattern('version', gcc_version)
> >>> +
> >>> + def test_rx_linux(self):
> >>> + """
> >>> + :avocado: tags=arch:rx
> >>> + :avocado: tags=machine:rx-virt
> >>> + :avocado: tags=endian:little
> >>> + """
> >>> + dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
> >>
> >> Sourceforge URL are not very stable, I'm now getting:
> >>
> >> HTTP request sent, awaiting response... 302 Found
> >> Location: https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb [following]
> >> --2020-03-08 17:17:31--
> >> https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb
> >> Resolving osdn.dl.osdn.net (osdn.dl.osdn.net)... 202.221.179.23
> >> Connecting to osdn.dl.osdn.net
> >> (osdn.dl.osdn.net)|202.221.179.23|:443... connected.
> >> HTTP request sent, awaiting response... 404 Not Found
> >> 2020-03-08 17:17:32 ERROR 404: Not Found.
> >
> > Permernet link is bellow.
> > https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
> > https://osdn.net/users/ysato/pf/qemu/dl/rx-virt.dtb
> > https://osdn.net/users/ysato/pf/qemu/dl/zImage
>
> Acceptance tests assert that "something that used to work in the past
> is still working today". The artifact hash is here to verify the file
> has not been modified (for security reasons or replaced by something
> else) so we keep testing the same.
>
> If you upgrade these files, we should keep testing the older version,
> and eventually add a new test (or entry in the same test) to test the
> new files.
OK.
The binary was prepared for qemu testing, so keep it as it is.
> >
> > I was misunderstanding. sorry.
> >
> >>> + dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
> >>> + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> >>> + kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
> >>> + kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
> >>> + kernel_path = self.fetch_asset(kernel_url,
> >>> asset_hash=kernel_hash)
> >>> +
> >>> + self.vm.set_machine('rx-virt')
> >>> + self.vm.set_console()
> >>> + kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE +
> >>> 'earlycon'
> >>> + self.vm.add_args('-kernel', kernel_path,
> >>> + '-dtb', dtb_path,
> >>> + '-no-reboot')
> >>> + self.vm.launch()
> >>> + self.wait_for_console_pattern('Sash command shell (version
> >>> 1.1.1)')
> >>> + self.exec_command_and_wait_for_pattern('printenv',
> >>> + 'TERM=linux')
> >>>
> >>
> >>
> >
>
--
Yosinori Sato
