On Fri, Feb 07, 2020 at 04:47:09PM +0100, Cédric Le Goater wrote:
> On 2/7/20 3:49 PM, Guenter Roeck wrote:
> > Initialize EHCI controllers on AST2600 using the existing
> > TYPE_PLATFORM_EHCI. After this change, booting ast2600-evb
> > into Linux successfully instantiates a USB interface after
> > the necessary changes are made to its devicetree files.
> >
> > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > ehci-platform: EHCI generic platform driver
> > ehci-platform 1e6a3000.usb: EHCI Host Controller
> > ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
> > ehci-platform 1e6a3000.usb: irq 25, io mem 0x1e6a3000
> > ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
> > usb usb1: Manufacturer: Linux 5.5.0-09825-ga0802f2d0ef5-dirty ehci_hcd
> > usb 1-1: new high-speed USB device number 2 using ehci-platform
> >
> > Signed-off-by: Guenter Roeck <li...@roeck-us.net>
> > ---
> > hw/arm/aspeed_ast2600.c | 23 +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> > index 931887ac68..a528251c8d 100644
> > --- a/hw/arm/aspeed_ast2600.c
> > +++ b/hw/arm/aspeed_ast2600.c
> > @@ -31,6 +31,8 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
> > [ASPEED_FMC] = 0x1E620000,
> > [ASPEED_SPI1] = 0x1E630000,
> > [ASPEED_SPI2] = 0x1E641000,
> > + [ASPEED_EHCI1] = 0x1E6A1000,
> > + [ASPEED_EHCI2] = 0x1E6A3000,
> > [ASPEED_MII1] = 0x1E650000,
> > [ASPEED_MII2] = 0x1E650008,
> > [ASPEED_MII3] = 0x1E650010,
> > @@ -77,6 +79,8 @@ static const int aspeed_soc_ast2600_irqmap[] = {
> > [ASPEED_ADC] = 78,
> > [ASPEED_XDMA] = 6,
> > [ASPEED_SDHCI] = 43,
> > + [ASPEED_EHCI1] = 5,
> > + [ASPEED_EHCI2] = 9,
>
> There is a conflict here with commit a29e3e127077 ("hw/arm: ast2600: Wire
> up the eMMC controller") which is mainline already
>
Ah, sorry, I had tested this on top of v4.2. Fortunately it is only
a context conflict. Should I resend ?
Thanks,
Guenter
> C.
>
> > [ASPEED_GPIO] = 40,
> > [ASPEED_GPIO_1_8V] = 11,
> > [ASPEED_RTC] = 13,
> > @@ -167,6 +171,11 @@ static void aspeed_soc_ast2600_init(Object *obj)
> > sizeof(s->spi[i]), typename);
> > }
> >
> > + for (i = 0; i < sc->ehcis_num; i++) {
> > + sysbus_init_child_obj(obj, "ehci[*]", OBJECT(&s->ehci[i]),
> > + sizeof(s->ehci[i]), TYPE_PLATFORM_EHCI);
> > + }
> > +
> > snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
> > sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc),
> > typename);
> > @@ -395,6 +404,19 @@ static void aspeed_soc_ast2600_realize(DeviceState
> > *dev, Error **errp)
> > s->spi[i].ctrl->flash_window_base);
> > }
> >
> > + /* EHCI */
> > + for (i = 0; i < sc->ehcis_num; i++) {
> > + object_property_set_bool(OBJECT(&s->ehci[i]), true, "realized",
> > &err);
> > + if (err) {
> > + error_propagate(errp, err);
> > + return;
> > + }
> > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
> > + sc->memmap[ASPEED_EHCI1 + i]);
> > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
> > + aspeed_soc_get_irq(s, ASPEED_EHCI1 + i));
> > + }
> > +
> > /* SDMC - SDRAM Memory Controller */
> > object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
> > if (err) {
> > @@ -499,6 +521,7 @@ static void aspeed_soc_ast2600_class_init(ObjectClass
> > *oc, void *data)
> > sc->silicon_rev = AST2600_A0_SILICON_REV;
> > sc->sram_size = 0x10000;
> > sc->spis_num = 2;
> > + sc->ehcis_num = 2;
> > sc->wdts_num = 4;
> > sc->macs_num = 4;
> > sc->irqmap = aspeed_soc_ast2600_irqmap;
> >
>
