On Fri, Jan 31, 2020 at 12:27 PM Alex Bennée <alex.ben...@linaro.org> wrote:
> Philippe Mathieu-Daudé <phi...@redhat.com> writes:
>
> > - convert DB_PRINT() to trace-events
> > - fix style/indentation
> >
> > Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com>
> > ---
> > hw/misc/avr_power.c | 17 +++++++++--------
> > hw/misc/trace-events | 4 ++++
> > 2 files changed, 13 insertions(+), 8 deletions(-)
> >
> > diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
> > index 598bc7279c..65ff7c4405 100644
> > --- a/hw/misc/avr_power.c
> > +++ b/hw/misc/avr_power.c
> > @@ -27,9 +27,7 @@
> > #include "qemu/log.h"
> > #include "hw/qdev-properties.h"
> > #include "hw/irq.h"
> > -
> > -#define DB_PRINT(fmt, args...) /* Nothing */
> > -/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ##
> > args)*/
> > +#include "trace.h"
> >
> > static void avr_mask_reset(DeviceState *dev)
> > {
> > @@ -48,19 +46,20 @@ static uint64_t avr_mask_read(void *opaque, hwaddr
> > offset, unsigned size)
> > assert(offset == 0);
> > AVRMaskState *s = opaque;
> >
> > + trace_avr_power_read(s->val);
> > +
> > return (uint64_t)s->val;
> > }
> >
> > static void avr_mask_write(void *opaque, hwaddr offset,
> > - uint64_t val64, unsigned size)
> > + uint64_t val64, unsigned size)
> > {
> > assert(size == 1);
> > assert(offset == 0);
> > AVRMaskState *s = opaque;
> > uint8_t val8 = val64;
> >
> > - DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> > -
> > + trace_avr_power_write(val8);
>
> You've dropped offset in this trace point which is probably worth
> keeping so you track where is being written to. Same with the read.
I dropped it because it is always 0x00, the register is 8bit wide. See
below, memory_region_init_io(...,1).
I thought about adding a "name" property so each instance can display
the device it belongs to, but this was too invasive, so I decided to
keep this change for later.
> > s->val = val8;
> > for (int i = 0; i < 8; i++) {
> > qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
> > @@ -71,7 +70,9 @@ static const MemoryRegionOps avr_mask_ops = {
> > .read = avr_mask_read,
> > .write = avr_mask_write,
> > .endianness = DEVICE_NATIVE_ENDIAN,
> > - .impl = {.max_access_size = 1}
> > + .impl = {
> > + .max_access_size = 1,
> > + },
> > };
> >
> > static void avr_mask_init(Object *dev)
> > @@ -80,7 +81,7 @@ static void avr_mask_init(Object *dev)
> > SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
> >
> > memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
> > - 0x01);
> > + 0x01);
^ Region has only 1 address: 0x00.
> > sysbus_init_mmio(busdev, &s->iomem);
> >
> > for (int i = 0; i < 8; i++) {
> > diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> > index 7f0f5dff3a..f716881bb1 100644
> > --- a/hw/misc/trace-events
> > +++ b/hw/misc/trace-events
> > @@ -179,3 +179,7 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u
> > value=0x%02x"
> > via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
> > via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value)
> > "sector=%u offset=%u addr=%d value=0x%02x"
> > via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value)
> > "sector=%u offset=%u addr=%d value=0x%02x"
> > +
> > +# avr_power.c
> > +avr_power_read(uint8_t value) "power_reduc read value:%u"
> > +avr_power_write(uint8_t value) "power_reduc write value:%u"
>
>
> --
> Alex Bennée
>
