>
>
> > 1) running "vmxcap" on the Azure VM
>
You need to run "modprobe msr" before.
Paolo
>
> $ sudo ./vmxcap
> Basic VMX Information
> Traceback (most recent call last):
> File "./vmxcap", line 280, in <module>
> c.show()
> File "./vmxcap", line 82, in show
> value = msr().read(self.msr, 0)
> File "./vmxcap", line 33, in __init__
> self.f = open('/dev/msr0', 'rb', 0)
> IOError: [Errno 2] No such file or directory: '/dev/msr0'
>
> > 2) adding "-vmx-xsaves,-vmx-shadow-vmcs" to the "-cpu" option and, if it
> > works, add only one of the two.
>
> nop, this didn't work
>
>
> > 3) if it doesn't work, adding "-vmx" to the "-cpu" option. Either way,
> > run "x86info -a" in the resulting VM.
>
> yes, -vmx works
>
> x86info -a -> https://paste.centos.org/view/f88f02f4
>
>
> thanks
>
> -
> Julio
>
> ------------------------------
> *From:* Paolo Bonzini <pbonz...@redhat.com>
> *Sent:* Saturday, December 14, 2019 1:30 AM
> *To:* Philippe Mathieu-Daudé <phi...@redhat.com>; Montes, Julio <
> julio.mon...@intel.com>; qemu-devel <qemu-devel@nongnu.org>
> *Cc:* Eduardo Habkost <ehabk...@redhat.com>
> *Subject:* Re: qemu-4.2: failed to set MSR 0x48b to 0x1582e00000000:
> Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
>
> On 14/12/19 02:31, Philippe Mathieu-Daudé wrote:
> >
> > failed to launch qemu: exit status 1, error messages from qemu log:
> > qemu-system-x86_64: error: failed to set MSR 0x48b to 0x1582e00000000
> > qemu-system-x86_64: /root/qemu/target/i386/kvm.c:2947: kvm_put_msrs:
> > Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
>
> It could be a KVM bug too. The following features are being enabled:
>
> #define VMX_SECONDARY_EXEC_XSAVES 0x00100000
> #define VMX_SECONDARY_EXEC_SHADOW_VMCS 0x00004000
> #define VMX_SECONDARY_EXEC_ENABLE_INVPCID 0x00001000
> #define VMX_SECONDARY_EXEC_RDRAND_EXITING 0x00000800
> #define VMX_SECONDARY_EXEC_ENABLE_VPID 0x00000020
> #define VMX_SECONDARY_EXEC_ENABLE_EPT 0x00000002
> #define VMX_SECONDARY_EXEC_DESC 0x00000004
> #define VMX_SECONDARY_EXEC_RDTSCP 0x00000008
>
> Can you try:
>
> 1) running "vmxcap" on the Azure VM
>
> 2) adding "-vmx-xsaves,-vmx-shadow-vmcs" to the "-cpu" option and, if it
> works, add only one of the two.
>
> 3) if it doesn't work, adding "-vmx" to the "-cpu" option. Either way,
> run "x86info -a" in the resulting VM.
>
> Thanks,
>
> Paolo
>
>
