On Wed, Dec 11, 2019 at 05:48:05PM +0100, Auger Eric wrote:
> Hi Michael,
>
> On 12/11/19 5:40 PM, Michael S. Tsirkin wrote:
> > On Fri, Nov 22, 2019 at 07:29:23PM +0100, Eric Auger wrote:
> >> This series implements the QEMU virtio-iommu device.
> >>
> >> This matches the v0.12 spec and the corresponding virtio-iommu
> >> driver upstreamed in 5.3.
> >>
> >> The pci proxy for the virtio-iommu device is instantiated using
> >> "-device virtio-iommu-pci". This series still relies on ACPI IORT/DT
> >> integration. Note the ACPI IORT integration is not yet upstreamed
> >> and testing needs to be based on Jean-Philippe's additional
> >> kernel patches [1].
> >
> > Or the config space approach? I really liked that one.
> Yes this corresponds to the paragraph below.
> >
> >>
> >> Work is ongoing to remove IORT adherence and allow the
> >> bindings between the IOMMU and the root complex to be defined
> >> and written into the PCI device configuration space. The outcome
> >> of this work is uncertain at this stage though. See [2].
Oh right. Why is it uncertain? Anything can be done to help?
> Thanks
>
> Eric
>
> >>
> >> So only patches 1-11 fully rely on upstreamed kernel code. Others
> >> should be considered as RFC.
> >>
> >> This respin allows people to test on ARM and x86. It also
> >> brings migration support (tested on ARM) and various cleanups.
> >> Reserved regions are now passed through an array of properties.
> >> A libqos test also is introduced to test the virtio-iommu API.
> >>
> >> Note integration with vhost devices and vfio devices is not part
> >> of this series. Please follow Bharat's respins [3].
> >>
> >> The 1st Patch ("migration: Support QLIST migration") was sent
> >> separately [4].
> >>
> >> Best Regards
> >>
> >> Eric
> >>
> >> This series can be found at:
> >> https://github.com/eauger/qemu/tree/v4.2-rc2-virtio-iommu-v11
> >>
> >> [1] kernel branch to be used for guest
> >> https://github.com/eauger/linux/tree/v5.4-rc8-virtio-iommu-iort
> >> [2] [RFC 00/13] virtio-iommu on non-devicetree platforms
> >> [3] VFIO/VHOST integration is not part of this series. Please follow
> >> [PATCH RFC v5 0/5] virtio-iommu: VFIO integration respins
> >> [4] [PATCH v6] migration: Support QLIST migration
> >>
> >> Testing:
> >> - tested with guest using virtio-net-pci
> >> (,vhost=off,iommu_platform,disable-modern=off,disable-legacy=on)
> >> and virtio-blk-pci
> >> - migration on ARM
> >> - on x86 PC machine I get some AHCI non translated transactions,
> >> very early. This does not prevent the guest from boot and behaving
> >> properly. Warnings look like:
> >> qemu-system-x86_64: virtio_iommu_translate sid=250 is not known!!
> >> qemu-system-x86_64: no buffer available in event queue to report event
> >> qemu-system-x86_64: AHCI: Failed to start FIS receive engine: bad FIS
> >> receive buffer address
> >>
> >> History:
> >>
> >> v10 -> v11:
> >> - introduce virtio_iommu_handle_req macro
> >> - migration support
> >> - introduce DEFINE_PROP_INTERVAL and pass reserved regions
> >> through an array of those
> >> - domain gtree simplification
> >>
> >> v9 -> v10:
> >> - rebase on 4.1.0-rc2, compliance with 0.12 spec
> >> - removed ACPI part
> >> - cleanup (see individual change logs)
> >> - moved to a PATCH series
> >>
> >> v8 -> v9:
> >> - virtio-iommu-pci device needs to be instantiated from the command
> >> line (RID is not imposed anymore).
> >> - tail structure properly initialized
> >>
> >> v7 -> v8:
> >> - virtio-iommu-pci added
> >> - virt instantiation modified
> >> - DT and ACPI modified to exclude the iommu RID from the mapping
> >> - VIRTIO_IOMMU_F_BYPASS, VIRTIO_F_VERSION_1 features exposed
> >>
> >> v6 -> v7:
> >> - rebase on qemu 3.0.0-rc3
> >> - minor update against v0.7
> >> - fix issue with EP not on pci.0 and ACPI probing
> >> - change the instantiation method
> >>
> >> v5 -> v6:
> >> - minor update against v0.6 spec
> >> - fix g_hash_table_lookup in virtio_iommu_find_add_as
> >> - replace some error_reports by qemu_log_mask(LOG_GUEST_ERROR, ...)
> >>
> >> v4 -> v5:
> >> - event queue and fault reporting
> >> - we now return the IOAPIC MSI region if the virtio-iommu is instantiated
> >> in a PC machine.
> >> - we bypass transactions on MSI HW region and fault on reserved ones.
> >> - We support ACPI boot with mach-virt (based on IORT proposal)
> >> - We moved to the new driver naming conventions
> >> - simplified mach-virt instantiation
> >> - worked around the disappearing of pci_find_primary_bus
> >> - in virtio_iommu_translate, check the dev->as is not NULL
> >> - initialize as->device_list in virtio_iommu_get_as
> >> - initialize bufstate.error to false in virtio_iommu_probe
> >>
> >> v3 -> v4:
> >> - probe request support although no reserved region is returned at
> >> the moment
> >> - unmap semantics less strict, as specified in v0.4
> >> - device registration, attach/detach revisited
> >> - split into smaller patches to ease review
> >> - propose a way to inform the IOMMU mr about the page_size_mask
> >> of underlying HW IOMMU, if any
> >> - remove warning associated with the translation of the MSI doorbell
> >>
> >> v2 -> v3:
> >> - rebase on top of 2.10-rc0 and especially
> >> [PATCH qemu v9 0/2] memory/iommu: QOM'fy IOMMU MemoryRegion
> >> - add mutex init
> >> - fix as->mappings deletion using g_tree_ref/unref
> >> - when a dev is attached whereas it is already attached to
> >> another address space, first detach it
> >> - fix some error values
> >> - page_sizes = TARGET_PAGE_MASK;
> >> - I haven't changed the unmap() semantics yet, waiting for the
> >> next virtio-iommu spec revision.
> >>
> >> v1 -> v2:
> >> - fix redefinition of viommu_as typedef
> >>
> >>
> >>
> >> Eric Auger (20):
> >> migration: Support QLIST migration
> >> virtio-iommu: Add skeleton
> >> virtio-iommu: Decode the command payload
> >> virtio-iommu: Add the iommu regions
> >> virtio-iommu: Endpoint and domains structs and helpers
> >> virtio-iommu: Implement attach/detach command
> >> virtio-iommu: Implement map/unmap
> >> virtio-iommu: Implement translate
> >> virtio-iommu: Implement fault reporting
> >> virtio-iommu-pci: Add virtio iommu pci support
> >> hw/arm/virt: Add the virtio-iommu device tree mappings
> >> qapi: Introduce DEFINE_PROP_INTERVAL
> >> virtio-iommu: Implement probe request
> >> virtio-iommu: Handle reserved regions in the translation process
> >> virtio-iommu-pci: Add array of Interval properties
> >> hw/arm/virt-acpi-build: Introduce fill_iort_idmap helper
> >> hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table
> >> virtio-iommu: Support migration
> >> pc: Add support for virtio-iommu-pci
> >> tests: Add virtio-iommu test
> >>
> >> hw/arm/virt-acpi-build.c | 91 ++-
> >> hw/arm/virt.c | 53 +-
> >> hw/core/qdev-properties.c | 90 +++
> >> hw/i386/acpi-build.c | 72 +++
> >> hw/i386/pc.c | 15 +-
> >> hw/virtio/Kconfig | 5 +
> >> hw/virtio/Makefile.objs | 2 +
> >> hw/virtio/trace-events | 22 +
> >> hw/virtio/virtio-iommu-pci.c | 91 +++
> >> hw/virtio/virtio-iommu.c | 952 +++++++++++++++++++++++++++++++
> >> include/exec/memory.h | 6 +
> >> include/hw/acpi/acpi-defs.h | 21 +-
> >> include/hw/arm/virt.h | 2 +
> >> include/hw/i386/pc.h | 2 +
> >> include/hw/pci/pci.h | 1 +
> >> include/hw/qdev-properties.h | 3 +
> >> include/hw/virtio/virtio-iommu.h | 67 +++
> >> include/migration/vmstate.h | 21 +
> >> include/qemu/queue.h | 39 ++
> >> include/qemu/typedefs.h | 1 +
> >> migration/trace-events | 5 +
> >> migration/vmstate-types.c | 70 +++
> >> qdev-monitor.c | 1 +
> >> tests/Makefile.include | 2 +
> >> tests/libqos/virtio-iommu.c | 177 ++++++
> >> tests/libqos/virtio-iommu.h | 45 ++
> >> tests/test-vmstate.c | 170 ++++++
> >> tests/virtio-iommu-test.c | 261 +++++++++
> >> 28 files changed, 2253 insertions(+), 34 deletions(-)
> >> create mode 100644 hw/virtio/virtio-iommu-pci.c
> >> create mode 100644 hw/virtio/virtio-iommu.c
> >> create mode 100644 include/hw/virtio/virtio-iommu.h
> >> create mode 100644 tests/libqos/virtio-iommu.c
> >> create mode 100644 tests/libqos/virtio-iommu.h
> >> create mode 100644 tests/virtio-iommu-test.c
> >>
> >> --
> >> 2.20.1
> >
> >
