On Wed, 11 Sep 2019 14:04:51 +1000
David Gibson <da...@gibson.dropbear.id.au> wrote:
> From: Alexey Kardashevskiy <a...@ozlabs.ru>
>
> SLOF implements one itself so let's remove it from QEMU. It is one less
> image and simpler setup as the RTAS blob never stays in its initial place
> anyway as the guest OS always decides where to put it.
>
> Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru>
> Signed-off-by: David Gibson <da...@gibson.dropbear.id.au>
> ---
> MAINTAINERS | 2 --
> Makefile | 2 +-
> configure | 6 +----
> hw/ppc/spapr.c | 32 ++-----------------------
> hw/ppc/spapr_rtas.c | 41 --------------------------------
> include/hw/ppc/spapr.h | 2 --
> pc-bios/spapr-rtas.bin | Bin 20 -> 0 bytes
> pc-bios/spapr-rtas/Makefile | 27 ---------------------
> pc-bios/spapr-rtas/spapr-rtas.S | 37 ----------------------------
> 9 files changed, 4 insertions(+), 145 deletions(-)
> delete mode 100644 pc-bios/spapr-rtas.bin
> delete mode 100644 pc-bios/spapr-rtas/Makefile
> delete mode 100644 pc-bios/spapr-rtas/spapr-rtas.S
>
Nice diffstat :)
But pwclient fails to apply it :(
[greg@bahia qemu-spapr]$ pwclient git-am 1160642
Applying patch #1160642 using 'git am'
Description: [6/7] spapr: Stop providing RTAS blob
Applying: spapr: Stop providing RTAS blob
error: cannot apply binary patch to 'pc-bios/spapr-rtas.bin' without full index
line
error: pc-bios/spapr-rtas.bin: patch does not apply
Patch failed at 0001 spapr: Stop providing RTAS blob
hint: Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
'git am' failed with exit status 128
and
[greg@bahia qemu-spapr]$ git am --show-current-patch | patch -p1 --merge
patching file MAINTAINERS
patching file Makefile
patching file configure
patching file hw/ppc/spapr.c
patching file hw/ppc/spapr_rtas.c
patching file include/hw/ppc/spapr.h
patching file pc-bios/spapr-rtas.bin
Not deleting file pc-bios/spapr-rtas.bin as content differs from patch
Not sure what's happening here...
patching file pc-bios/spapr-rtas/Makefile
patching file pc-bios/spapr-rtas/spapr-rtas.S
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 50eaf005f4..9823f40213 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1077,8 +1077,6 @@ F: hw/*/spapr*
> F: include/hw/*/spapr*
> F: hw/*/xics*
> F: include/hw/*/xics*
> -F: pc-bios/spapr-rtas/*
> -F: pc-bios/spapr-rtas.bin
> F: pc-bios/slof.bin
> F: docs/specs/ppc-spapr-hcalls.txt
> F: docs/specs/ppc-spapr-hotplug.txt
> diff --git a/Makefile b/Makefile
> index ae17a83067..4637f95371 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -764,7 +764,7 @@ qemu-nsis.bmp \
> bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
> multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
> s390-ccw.img s390-netboot.img \
> -spapr-rtas.bin slof.bin skiboot.lid \
> +slof.bin skiboot.lid \
> palcode-clipper \
> u-boot.e500 u-boot-sam460-20100605.bin \
> qemu_vga.ndrv \
> diff --git a/configure b/configure
> index 95134c0180..b79d38592b 100755
> --- a/configure
> +++ b/configure
> @@ -6211,9 +6211,6 @@ if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; }
> && \
> fi
> done
> fi
> -if test "$ARCH" = "ppc64" && test "$targetos" != "Darwin" ; then
> - roms="$roms spapr-rtas"
> -fi
>
> # Only build s390-ccw bios if we're on s390x and the compiler has -march=z900
> if test "$cpu" = "s390x" ; then
> @@ -7930,14 +7927,13 @@ fi
> DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos
> tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests tests/vm"
> DIRS="$DIRS tests/fp tests/qgraph"
> DIRS="$DIRS docs docs/interop fsdev scsi"
> -DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
> +DIRS="$DIRS pc-bios/optionrom pc-bios/s390-ccw"
> DIRS="$DIRS roms/seabios roms/vgabios"
> LINKS="Makefile tests/tcg/Makefile"
> LINKS="$LINKS tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
> LINKS="$LINKS tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
> LINKS="$LINKS tests/fp/Makefile"
> LINKS="$LINKS pc-bios/optionrom/Makefile pc-bios/keymaps"
> -LINKS="$LINKS pc-bios/spapr-rtas/Makefile"
> LINKS="$LINKS pc-bios/s390-ccw/Makefile"
> LINKS="$LINKS roms/seabios/Makefile roms/vgabios/Makefile"
> LINKS="$LINKS pc-bios/qemu-icon.bmp"
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index d18744268f..5a919a6cc1 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -94,7 +94,6 @@
> * We load our kernel at 4M, leaving space for SLOF initial image
> */
> #define FDT_MAX_SIZE 0x100000
> -#define RTAS_MAX_SIZE 0x10000
> #define RTAS_MAX_ADDR 0x80000000 /* RTAS must stay below that */
> #define FW_MAX_SIZE 0x400000
> #define FW_FILE_NAME "slof.bin"
> @@ -1721,8 +1720,7 @@ static void spapr_machine_reset(MachineState *machine)
> {
> SpaprMachineState *spapr = SPAPR_MACHINE(machine);
> PowerPCCPU *first_ppc_cpu;
> - uint32_t rtas_limit;
> - hwaddr rtas_addr, fdt_addr;
> + hwaddr fdt_addr;
> void *fdt;
> int rc;
>
> @@ -1786,14 +1784,10 @@ static void spapr_machine_reset(MachineState *machine)
> * or just below 2GB, whichever is lower, so that it can be
> * processed with 32-bit real mode code if necessary
> */
> - rtas_limit = MIN(spapr->rma_size, RTAS_MAX_ADDR);
> - rtas_addr = rtas_limit - RTAS_MAX_SIZE;
> - fdt_addr = rtas_addr - FDT_MAX_SIZE;
> + fdt_addr = MIN(spapr->rma_size, RTAS_MAX_ADDR) - FDT_MAX_SIZE;
>
> fdt = spapr_build_fdt(spapr);
>
> - spapr_load_rtas(spapr, fdt, rtas_addr);
> -
> rc = fdt_pack(fdt);
>
> /* Should only fail if we've built a corrupted tree */
> @@ -2953,28 +2947,6 @@ static void spapr_machine_init(MachineState *machine)
> spapr_create_lmb_dr_connectors(spapr);
> }
>
> - filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
> - if (!filename) {
> - error_report("Could not find LPAR rtas '%s'", "spapr-rtas.bin");
> - exit(1);
> - }
> - spapr->rtas_size = get_image_size(filename);
> - if (spapr->rtas_size < 0) {
> - error_report("Could not get size of LPAR rtas '%s'", filename);
> - exit(1);
> - }
> - spapr->rtas_blob = g_malloc(spapr->rtas_size);
> - if (load_image_size(filename, spapr->rtas_blob, spapr->rtas_size) < 0) {
> - error_report("Could not load LPAR rtas '%s'", filename);
> - exit(1);
> - }
> - if (spapr->rtas_size > RTAS_MAX_SIZE) {
> - error_report("RTAS too big ! 0x%zx bytes (max is 0x%x)",
> - (size_t)spapr->rtas_size, RTAS_MAX_SIZE);
> - exit(1);
> - }
> - g_free(filename);
> -
> /* Set up RTAS event infrastructure */
> spapr_events_init(spapr);
>
> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
> index bee3835214..8d8d8cdfcb 100644
> --- a/hw/ppc/spapr_rtas.c
> +++ b/hw/ppc/spapr_rtas.c
> @@ -477,47 +477,6 @@ void spapr_dt_rtas_tokens(void *fdt, int rtas)
> }
> }
>
> -void spapr_load_rtas(SpaprMachineState *spapr, void *fdt, hwaddr addr)
> -{
> - int rtas_node;
> - int ret;
> -
> - /* Copy RTAS blob into guest RAM */
> - cpu_physical_memory_write(addr, spapr->rtas_blob, spapr->rtas_size);
> -
> - ret = fdt_add_mem_rsv(fdt, addr, spapr->rtas_size);
> - if (ret < 0) {
> - error_report("Couldn't add RTAS reserve entry: %s",
> - fdt_strerror(ret));
> - exit(1);
> - }
> -
> - /* Update the device tree with the blob's location */
> - rtas_node = fdt_path_offset(fdt, "/rtas");
> - assert(rtas_node >= 0);
> -
> - ret = fdt_setprop_cell(fdt, rtas_node, "linux,rtas-base", addr);
> - if (ret < 0) {
> - error_report("Couldn't add linux,rtas-base property: %s",
> - fdt_strerror(ret));
> - exit(1);
> - }
> -
> - ret = fdt_setprop_cell(fdt, rtas_node, "linux,rtas-entry", addr);
> - if (ret < 0) {
> - error_report("Couldn't add linux,rtas-entry property: %s",
> - fdt_strerror(ret));
> - exit(1);
> - }
> -
> - ret = fdt_setprop_cell(fdt, rtas_node, "rtas-size", spapr->rtas_size);
> - if (ret < 0) {
> - error_report("Couldn't add rtas-size property: %s",
> - fdt_strerror(ret));
> - exit(1);
> - }
> -}
> -
> static void core_rtas_register_types(void)
> {
> spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character",
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index dfec8e8e76..cbd1a4c9f3 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -154,8 +154,6 @@ struct SpaprMachineState {
>
> hwaddr rma_size;
> int vrma_adjust;
> - ssize_t rtas_size;
> - void *rtas_blob;
> uint32_t fdt_size;
> uint32_t fdt_initial_size;
> void *fdt_blob;
> diff --git a/pc-bios/spapr-rtas.bin b/pc-bios/spapr-rtas.bin
> deleted file mode 100644
> index fc24c8ed8b..0000000000
> Binary files a/pc-bios/spapr-rtas.bin and /dev/null differ
> diff --git a/pc-bios/spapr-rtas/Makefile b/pc-bios/spapr-rtas/Makefile
> deleted file mode 100644
> index 4b9bb12306..0000000000
> --- a/pc-bios/spapr-rtas/Makefile
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -all: build-all
> -# Dummy command so that make thinks it has done something
> - @true
> -
> -include ../../config-host.mak
> -include $(SRC_PATH)/rules.mak
> -
> -$(call set-vpath, $(SRC_PATH)/pc-bios/spapr-rtas)
> -
> -.PHONY : all clean build-all
> -
> -#CFLAGS += -I$(SRC_PATH)
> -#QEMU_CFLAGS = $(CFLAGS)
> -
> -build-all: spapr-rtas.bin
> -
> -%.o: %.S
> - $(call quiet-command,$(CCAS) -mbig -c -o $@ $<,"CCAS","$(TARGET_DIR)$@")
> -
> -%.img: %.o
> - $(call quiet-command,$(CC) -nostdlib -mbig -o $@
> $<,"Building","$(TARGET_DIR)$@")
> -
> -%.bin: %.img
> - $(call quiet-command,$(OBJCOPY) -O binary -j .text $<
> $@,"Building","$(TARGET_DIR)$@")
> -
> -clean:
> - rm -f *.o *.d *.img *.bin *~
> diff --git a/pc-bios/spapr-rtas/spapr-rtas.S b/pc-bios/spapr-rtas/spapr-rtas.S
> deleted file mode 100644
> index 903bec2150..0000000000
> --- a/pc-bios/spapr-rtas/spapr-rtas.S
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -/*
> - * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System
> Emulator
> - *
> - * Trivial in-partition RTAS implementation, based on a hypercall
> - *
> - * Copyright (c) 2010,2011 David Gibson, IBM Corporation.
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> - * of this software and associated documentation files (the "Software"), to
> deal
> - * in the Software without restriction, including without limitation the
> rights
> - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> - * copies of the Software, and to permit persons to whom the Software is
> - * furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice shall be included in
> - * all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> FROM,
> - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> - * THE SOFTWARE.
> - *
> - */
> -
> -#define KVMPPC_HCALL_BASE 0xf000
> -#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
> -
> -.globl _start
> -_start:
> - mr 4,3
> - lis 3,KVMPPC_H_RTAS@h
> - ori 3,3,KVMPPC_H_RTAS@l
> - sc 1
> - blr
