On Sat, Aug 31, 2019 at 8:15 PM Bin Meng <bmeng...@gmail.com> wrote:
>
> This implements a simple model for SiFive FU540 OTP (One-Time
> Programmable) Memory interface, primarily for reading out the
> stored serial number from the first 1 KiB of the 16 KiB OTP
> memory reserved by SiFive for internal use.
>
> Signed-off-by: Bin Meng <bmeng...@gmail.com>
>
> ---
>
> Changes in v7: None
> Changes in v6: None
> Changes in v5:
> - change to use defines instead of enums
> - change to use qemu_log_mask(LOG_GUEST_ERROR,...) in sifive_u_otp
> - creating a 32-bit val variable and using that instead of casting
> everywhere in sifive_u_otp_write()
> - move all register initialization to sifive_u_otp_reset() function
> - drop sifive_u_otp_create()
>
> Changes in v4:
> - prefix all macros/variables/functions with SIFIVE_U/sifive_u
> in the sifive_u_otp driver
>
> Changes in v3: None
> Changes in v2: None
>
> hw/riscv/Makefile.objs | 1 +
> hw/riscv/sifive_u_otp.c | 190
> ++++++++++++++++++++++++++++++++++++++++
> include/hw/riscv/sifive_u_otp.h | 80 +++++++++++++++++
> 3 files changed, 271 insertions(+)
> create mode 100644 hw/riscv/sifive_u_otp.c
> create mode 100644 include/hw/riscv/sifive_u_otp.h
>
> diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
> index b95bbd5..fc3c6dd 100644
> --- a/hw/riscv/Makefile.objs
> +++ b/hw/riscv/Makefile.objs
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SIFIVE) += sifive_gpio.o
> obj-$(CONFIG_SIFIVE) += sifive_plic.o
> obj-$(CONFIG_SIFIVE) += sifive_test.o
> obj-$(CONFIG_SIFIVE_U) += sifive_u.o
> +obj-$(CONFIG_SIFIVE_U) += sifive_u_otp.o
> obj-$(CONFIG_SIFIVE_U) += sifive_u_prci.o
> obj-$(CONFIG_SIFIVE) += sifive_uart.o
> obj-$(CONFIG_SPIKE) += spike.o
> diff --git a/hw/riscv/sifive_u_otp.c b/hw/riscv/sifive_u_otp.c
> new file mode 100644
> index 0000000..7d65a85
> --- /dev/null
> +++ b/hw/riscv/sifive_u_otp.c
> @@ -0,0 +1,190 @@
> +/*
> + * QEMU SiFive U OTP (One-Time Programmable) Memory interface
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng...@gmail.com>
> + *
> + * Simple model of the OTP to emulate register reads made by the SDK BSP
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/sysbus.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "hw/riscv/sifive_u_otp.h"
> +
> +static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int
> size)
> +{
> + SiFiveUOTPState *s = opaque;
> +
> + switch (addr) {
> + case SIFIVE_U_OTP_PA:
> + return s->pa;
> + case SIFIVE_U_OTP_PAIO:
> + return s->paio;
> + case SIFIVE_U_OTP_PAS:
> + return s->pas;
> + case SIFIVE_U_OTP_PCE:
> + return s->pce;
> + case SIFIVE_U_OTP_PCLK:
> + return s->pclk;
> + case SIFIVE_U_OTP_PDIN:
> + return s->pdin;
> + case SIFIVE_U_OTP_PDOUT:
> + if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
> + (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
> + (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
> + return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
> + } else {
> + return 0xff;
> + }
> + case SIFIVE_U_OTP_PDSTB:
> + return s->pdstb;
> + case SIFIVE_U_OTP_PPROG:
> + return s->pprog;
> + case SIFIVE_U_OTP_PTC:
> + return s->ptc;
> + case SIFIVE_U_OTP_PTM:
> + return s->ptm;
> + case SIFIVE_U_OTP_PTM_REP:
> + return s->ptm_rep;
> + case SIFIVE_U_OTP_PTR:
> + return s->ptr;
> + case SIFIVE_U_OTP_PTRIM:
> + return s->ptrim;
> + case SIFIVE_U_OTP_PWE:
> + return s->pwe;
> + }
> +
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%x\n",
> + __func__, (int)addr);
Don't cast addr to an int, use the correct macros.
> + return 0;
> +}
> +
> +static void sifive_u_otp_write(void *opaque, hwaddr addr,
> + uint64_t val64, unsigned int size)
> +{
> + SiFiveUOTPState *s = opaque;
> + uint32_t val32 = (uint32_t)val64;
> +
> + switch (addr) {
> + case SIFIVE_U_OTP_PA:
> + s->pa = val32 & SIFIVE_U_OTP_PA_MASK;
> + break;
> + case SIFIVE_U_OTP_PAIO:
> + s->paio = val32;
> + break;
> + case SIFIVE_U_OTP_PAS:
> + s->pas = val32;
> + break;
> + case SIFIVE_U_OTP_PCE:
> + s->pce = val32;
> + break;
> + case SIFIVE_U_OTP_PCLK:
> + s->pclk = val32;
> + break;
> + case SIFIVE_U_OTP_PDIN:
> + s->pdin = val32;
> + break;
> + case SIFIVE_U_OTP_PDOUT:
> + /* read-only */
> + break;
> + case SIFIVE_U_OTP_PDSTB:
> + s->pdstb = val32;
> + break;
> + case SIFIVE_U_OTP_PPROG:
> + s->pprog = val32;
> + break;
> + case SIFIVE_U_OTP_PTC:
> + s->ptc = val32;
> + break;
> + case SIFIVE_U_OTP_PTM:
> + s->ptm = val32;
> + break;
> + case SIFIVE_U_OTP_PTM_REP:
> + s->ptm_rep = val32;
> + break;
> + case SIFIVE_U_OTP_PTR:
> + s->ptr = val32;
> + break;
> + case SIFIVE_U_OTP_PTRIM:
> + s->ptrim = val32;
> + break;
> + case SIFIVE_U_OTP_PWE:
> + s->pwe = val32;
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%x v=0x%x\n",
> + __func__, (int)addr, (int)val64);
Same here.
With those fixed:
Reviewed-by: Alistair Francis <alistair.fran...@wdc.com>
Alistair
> + }
> +}
> +
> +static const MemoryRegionOps sifive_u_otp_ops = {
> + .read = sifive_u_otp_read,
> + .write = sifive_u_otp_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> + .valid = {
> + .min_access_size = 4,
> + .max_access_size = 4
> + }
> +};
> +
> +static Property sifive_u_otp_properties[] = {
> + DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
> +{
> + SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
> +
> + memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
> + TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
> + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
> +}
> +
> +static void sifive_u_otp_reset(DeviceState *dev)
> +{
> + SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
> +
> + /* Initialize all fuses' initial value to 0xFFs */
> + memset(s->fuse, 0xff, sizeof(s->fuse));
> +
> + /* Make a valid content of serial number */
> + s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
> + s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
> +}
> +
> +static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->props = sifive_u_otp_properties;
> + dc->realize = sifive_u_otp_realize;
> + dc->reset = sifive_u_otp_reset;
> +}
> +
> +static const TypeInfo sifive_u_otp_info = {
> + .name = TYPE_SIFIVE_U_OTP,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(SiFiveUOTPState),
> + .class_init = sifive_u_otp_class_init,
> +};
> +
> +static void sifive_u_otp_register_types(void)
> +{
> + type_register_static(&sifive_u_otp_info);
> +}
> +
> +type_init(sifive_u_otp_register_types)
> diff --git a/include/hw/riscv/sifive_u_otp.h b/include/hw/riscv/sifive_u_otp.h
> new file mode 100644
> index 0000000..6392975
> --- /dev/null
> +++ b/include/hw/riscv/sifive_u_otp.h
> @@ -0,0 +1,80 @@
> +/*
> + * QEMU SiFive U OTP (One-Time Programmable) Memory interface
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng...@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef HW_SIFIVE_U_OTP_H
> +#define HW_SIFIVE_U_OTP_H
> +
> +#define SIFIVE_U_OTP_PA 0x00
> +#define SIFIVE_U_OTP_PAIO 0x04
> +#define SIFIVE_U_OTP_PAS 0x08
> +#define SIFIVE_U_OTP_PCE 0x0C
> +#define SIFIVE_U_OTP_PCLK 0x10
> +#define SIFIVE_U_OTP_PDIN 0x14
> +#define SIFIVE_U_OTP_PDOUT 0x18
> +#define SIFIVE_U_OTP_PDSTB 0x1C
> +#define SIFIVE_U_OTP_PPROG 0x20
> +#define SIFIVE_U_OTP_PTC 0x24
> +#define SIFIVE_U_OTP_PTM 0x28
> +#define SIFIVE_U_OTP_PTM_REP 0x2C
> +#define SIFIVE_U_OTP_PTR 0x30
> +#define SIFIVE_U_OTP_PTRIM 0x34
> +#define SIFIVE_U_OTP_PWE 0x38
> +
> +#define SIFIVE_U_OTP_PCE_EN (1 << 0)
> +
> +#define SIFIVE_U_OTP_PDSTB_EN (1 << 0)
> +
> +#define SIFIVE_U_OTP_PTRIM_EN (1 << 0)
> +
> +#define SIFIVE_U_OTP_PA_MASK 0xfff
> +#define SIFIVE_U_OTP_NUM_FUSES 0x1000
> +#define SIFIVE_U_OTP_SERIAL_ADDR 0xfc
> +
> +#define SIFIVE_U_OTP_REG_SIZE 0x1000
> +
> +#define TYPE_SIFIVE_U_OTP "riscv.sifive.u.otp"
> +
> +#define SIFIVE_U_OTP(obj) \
> + OBJECT_CHECK(SiFiveUOTPState, (obj), TYPE_SIFIVE_U_OTP)
> +
> +typedef struct SiFiveUOTPState {
> + /*< private >*/
> + SysBusDevice parent_obj;
> +
> + /*< public >*/
> + MemoryRegion mmio;
> + uint32_t pa;
> + uint32_t paio;
> + uint32_t pas;
> + uint32_t pce;
> + uint32_t pclk;
> + uint32_t pdin;
> + uint32_t pdstb;
> + uint32_t pprog;
> + uint32_t ptc;
> + uint32_t ptm;
> + uint32_t ptm_rep;
> + uint32_t ptr;
> + uint32_t ptrim;
> + uint32_t pwe;
> + uint32_t fuse[SIFIVE_U_OTP_NUM_FUSES];
> + /* config */
> + uint32_t serial;
> +} SiFiveUOTPState;
> +
> +#endif /* HW_SIFIVE_U_OTP_H */
> --
> 2.7.4
>
>
