Palmer,
On Wed, Aug 14, 2019 at 5:34 PM Bin Meng <bmeng...@gmail.com> wrote:
>
> Hi Palmer,
>
> On Wed, Aug 7, 2019 at 10:53 AM Bin Meng <bmeng...@gmail.com> wrote:
> >
> > On Wed, Aug 7, 2019 at 5:06 AM Philippe Mathieu-Daudé <phi...@redhat.com>
> > wrote:
> > >
> > > On 8/5/19 8:43 AM, Bin Meng wrote:
> > > > On Mon, Aug 5, 2019 at 2:14 PM Chih-Min Chao <chihmin.c...@sifive.com>
> > > > wrote:
> > > >> On Sat, Aug 3, 2019 at 8:27 AM Bin Meng <bmeng...@gmail.com> wrote:
> > > >>>
> > > >>> Some of the SoC IP block sizes are wrong. Correct them according
> > > >>> to the FE310 manual.
> > > >>>
> > > >>> Signed-off-by: Bin Meng <bmeng...@gmail.com>
> > > >>> ---
> > > >>>
> > > >>> hw/riscv/sifive_e.c | 6 +++---
> > > >>> 1 file changed, 3 insertions(+), 3 deletions(-)
> > > >>>
> > > >>> diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
> > > >>> index 2a499d8..9655847 100644
> > > >>> --- a/hw/riscv/sifive_e.c
> > > >>> +++ b/hw/riscv/sifive_e.c
> > > >>> @@ -53,13 +53,13 @@ static const struct MemmapEntry {
> > > >>> hwaddr base;
> > > >>> hwaddr size;
> > > >>> } sifive_e_memmap[] = {
> > > >>> - [SIFIVE_E_DEBUG] = { 0x0, 0x100 },
> > > >>> + [SIFIVE_E_DEBUG] = { 0x0, 0x1000 },
> > > >>> [SIFIVE_E_MROM] = { 0x1000, 0x2000 },
> > > >>> [SIFIVE_E_OTP] = { 0x20000, 0x2000 },
> > > >>> [SIFIVE_E_CLINT] = { 0x2000000, 0x10000 },
> > > >>> [SIFIVE_E_PLIC] = { 0xc000000, 0x4000000 },
> > > >>> - [SIFIVE_E_AON] = { 0x10000000, 0x8000 },
> > > >>> - [SIFIVE_E_PRCI] = { 0x10008000, 0x8000 },
> > > >>> + [SIFIVE_E_AON] = { 0x10000000, 0x1000 },
> > > >>> + [SIFIVE_E_PRCI] = { 0x10008000, 0x1000 },
> > > >>> [SIFIVE_E_OTP_CTRL] = { 0x10010000, 0x1000 },
> > > >>> [SIFIVE_E_GPIO0] = { 0x10012000, 0x1000 },
> > > >>> [SIFIVE_E_UART0] = { 0x10013000, 0x1000 },
> > > >>> --
> > > >>> 2.7.4
> > > >>>
> > > >>
> > > >> It seems the modification follows E310-G002(Hifive1 Rev B) spec and
> > > >> the origin is for E310-G000(Hifive1) spec.
> > > >> There should be some way to specify different board version with
> > > >> different memory map or we have policy, always support the latest spec.
> > >
> > > I agree with Chao, it would be cleaner to have two different boards
> > > (machines).
> > > Since the SoCs are very similar, you could add a 'revision' property and
> > > use it to select the correct map.
> > >
> >
> > I am not sure if adding two different machines will bring us a lot of
> > benefits, since the only difference is the SoC revision with different
> > block sizes.
> >
> > > >>
> > > >
> > > > Yes, I checked both specs. The older spec says these bigger sizes,
> > > > however their register sizes fit well in the smaller range as well. So
> > > > I think the modification works well for both.
> > >
> > > This is OK for the PRCI, since sifive_prci_create() does not use
> > > memmap[SIFIVE_E_PRCI].size.
> > >
> > > However the AON case is borderline, since you shrink it from 32KiB to
> > > 4KiB.
> > >
> >
> > AON is not implemented anyway currently. And I checked the FE310 old
> > spec, its register block size is still within the 4KiB range, so
> > shrinking the size should be fine for both old and new SoC.
> >
> > > BTW (not related to this patch) it is odd a function named
> > > sifive_mmio_emulate() creates a RAM region with memory_region_init_ram()
> > > and does not use the UnimplementedDevice (see make_unimp_dev() in
> > > hw/arm/musca.c).
> > >
>
> What's your suggestion regarding this patch?
Ping?
Regards,
Bin
