ping...
2019年7月20日(土) 15:04 <hikaru...@gmail.com>:
> From: Hikaru Nishida <hikaru...@gmail.com>
>
> This commit adds No Op Command (23) to xHC for verifying the operation
> of the Command Ring mechanisms.
> No Op Command is defined in XHCI spec (4.6.2) and just reports Command
> Completion Event with Completion Code == Success.
> Before this commit, No Op Command is not implemented so xHC reports
> Command Completion Event with Completion Code == TRB Error. This commit
> fixes this behaviour to report Completion Code correctly.
>
> Signed-off-by: Hikaru Nishida <hikaru...@gmail.com>
> ---
> hw/usb/hcd-xhci.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
> index 5894a18663..5ceff78280 100644
> --- a/hw/usb/hcd-xhci.c
> +++ b/hw/usb/hcd-xhci.c
> @@ -2542,6 +2542,9 @@ static void xhci_process_commands(XHCIState *xhci)
> case CR_GET_PORT_BANDWIDTH:
> event.ccode = xhci_get_port_bandwidth(xhci, trb.parameter);
> break;
> + case CR_NOOP:
> + event.ccode = CC_SUCCESS;
> + break;
> case CR_VENDOR_NEC_FIRMWARE_REVISION:
> if (xhci->nec_quirks) {
> event.type = 48; /* NEC reply */
> --
> 2.20.1 (Apple Git-117)
>
>
