On Tue, Jun 25, 2019 at 02:45:11PM +0200, Igor Mammedov wrote:
> On Fri, 21 Jun 2019 02:46:48 -0400
> "Michael S. Tsirkin" <m...@redhat.com> wrote:
>
> > During boot, linux would sometimes overwrites control of a powered off
> > slot before powering it on. Unfortunately QEMU interprets that as a
> > power off request and ejects the device.
> >
> > For example:
> >
> > /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \
> > -device
> > pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
> > -monitor stdio disk.qcow2
> > (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0
> > (qemu)cont
> >
> > Balloon is deleted during guest boot.
> >
> > To fix, save control beforehand and check that power
> > or led state actually change before ejecting.
> >
> > Note: this is more a hack than a solution, ideally we'd
> > find a better way to detect ejects, or move away
> > from ejects completely and instead monitor whether
> > it's safe to delete device due to e.g. its power state.
> >
> > Signed-off-by: Michael S. Tsirkin <m...@redhat.com>
> > ---
> > include/hw/pci/pcie.h | 3 ++-
> > hw/pci-bridge/pcie_root_port.c | 5 ++++-
> > hw/pci-bridge/xio3130_downstream.c | 5 ++++-
> > hw/pci/pcie.c | 14 ++++++++++++--
> > 4 files changed, 22 insertions(+), 5 deletions(-)
> >
> > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
> > index e30334d74d..8d90c0e193 100644
> > --- a/include/hw/pci/pcie.h
> > +++ b/include/hw/pci/pcie.h
> > @@ -107,7 +107,8 @@ void pcie_cap_lnkctl_reset(PCIDevice *dev);
> >
> > void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot);
> > void pcie_cap_slot_reset(PCIDevice *dev);
> > -void pcie_cap_slot_write_config(PCIDevice *dev,
> > +void pcie_cap_slot_get(PCIDevice *dev, uint16_t *slot_ctl, uint16_t
> > *slt_sta);
> > +void pcie_cap_slot_write_config(PCIDevice *dev, uint16_t slot_ctl,
> > uint16_t slt_sta,
> > uint32_t addr, uint32_t val, int len);
> > int pcie_cap_slot_post_load(void *opaque, int version_id);
> > void pcie_cap_slot_push_attention_button(PCIDevice *dev);
> > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
> > index 92f253c924..09019ca05d 100644
> > --- a/hw/pci-bridge/pcie_root_port.c
> > +++ b/hw/pci-bridge/pcie_root_port.c
> > @@ -31,10 +31,13 @@ static void rp_write_config(PCIDevice *d, uint32_t
> > address,
> > {
> > uint32_t root_cmd =
> > pci_get_long(d->config + d->exp.aer_cap + PCI_ERR_ROOT_COMMAND);
> > + uint16_t slt_ctl, slt_sta;
> > +
> > + pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
> >
> > pci_bridge_write_config(d, address, val, len);
> > rp_aer_vector_update(d);
> > - pcie_cap_slot_write_config(d, address, val, len);
> > + pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
> > pcie_aer_write_config(d, address, val, len);
> > pcie_aer_root_write_config(d, address, val, len, root_cmd);
> > }
> > diff --git a/hw/pci-bridge/xio3130_downstream.c
> > b/hw/pci-bridge/xio3130_downstream.c
> > index 264e37d6a6..899b0fd6c9 100644
> > --- a/hw/pci-bridge/xio3130_downstream.c
> > +++ b/hw/pci-bridge/xio3130_downstream.c
> > @@ -41,9 +41,12 @@
> > static void xio3130_downstream_write_config(PCIDevice *d, uint32_t address,
> > uint32_t val, int len)
> > {
> > + uint16_t slt_ctl, slt_sta;
> > +
> > + pcie_cap_slot_get(d, &slt_sta, &slt_ctl);
> > pci_bridge_write_config(d, address, val, len);
> > pcie_cap_flr_write_config(d, address, val, len);
> > - pcie_cap_slot_write_config(d, address, val, len);
> > + pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
> > pcie_aer_write_config(d, address, val, len);
> > }
> >
> > diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> > index b22527000d..f8490a00de 100644
> > --- a/hw/pci/pcie.c
> > +++ b/hw/pci/pcie.c
> > @@ -594,7 +594,15 @@ void pcie_cap_slot_reset(PCIDevice *dev)
> > hotplug_event_update_event_status(dev);
> > }
> >
> > -void pcie_cap_slot_write_config(PCIDevice *dev,
> > +void pcie_cap_slot_get(PCIDevice *dev, uint16_t *slt_ctl, uint16_t
> > *slt_sta)
> > +{
> > + uint32_t pos = dev->exp.exp_cap;
> > + uint8_t *exp_cap = dev->config + pos;
> > + *slt_ctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL);
> > + *slt_sta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
> > +}
> > +
> > +void pcie_cap_slot_write_config(PCIDevice *dev, uint16_t slt_ctl, uint16_t
> > slt_sta,
> > uint32_t addr, uint32_t val, int len)
> > {
> > uint32_t pos = dev->exp.exp_cap;
> > @@ -623,7 +631,9 @@ void pcie_cap_slot_write_config(PCIDevice *dev,
> > * controller is off, it is safe to detach the devices.
> > */
> comment above probably should be updated to account for new conditions
It's actually the same condition: the change is that
we do not eject if it was already true.
> > if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) &&
> > - ((val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF)) {
> > + (val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF &&
> > + (!(slt_ctl & PCI_EXP_SLTCTL_PCC) ||
> > + (slt_ctl & PCI_EXP_SLTCTL_PIC_OFF) != PCI_EXP_SLTCTL_PIC_OFF)) {
> > PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
> > pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> > pcie_unplug_device, NULL);
