On 6/3/19 3:41 PM, Aleksandar Markovic wrote: >>>>> This test can be run using: >>>>> >>>>> $ avocado --show=ssh run -t arch:mips >>> tests/acceptance/linux_ssh_mips_malta.py >>>>> ssh: Entering interactive session. >>>>> ssh: # uname -a >>>>> ssh: Linux debian-mips 3.2.0-4-4kc-malta #1 Debian 3.2.51-1 mips >>> GNU/Linux >>>>> ssh: # lspci -d 11ab:4620 >>>>> ssh: 00:00.0 Host bridge: Marvell Technology Group Ltd. >>> GT-64120/64120A/64121A System Controller (rev 10) >>>>> ssh: # cat /sys/bus/i2c/devices/i2c-0/name >>>>> ssh: SMBus PIIX4 adapter at 1100 >>>>> ssh: # cat /proc/mtd >>>>> ssh: dev: size erasesize name >>>>> ssh: mtd0: 00100000 00010000 "YAMON" >>>>> ssh: mtd1: 002e0000 00010000 "User FS" >>>>> ssh: mtd2: 00020000 00010000 "Board Config" >>>>> ssh: # md5sum /dev/mtd2ro >>>>> ssh: 0dfbe8aa4c20b52e1b8bf3cb6cbdf193 /dev/mtd2ro >>>>> ssh: # poweroff >> >> Aleksandar, do you think of other commands we should run? What commands >> do you usually try? >> > > Philippe, I will leave to you the choice of commands. You know that I > have a very high opinion on this test that you designed and also > implemented, I am more than happy even without any additions. But, > by no means, add something whenever you think it is interesting > and useful. > > However, I want to bring to your attention something that could also > be of tremendous importance: Can we try communicating with the > newly booted machine via gdb? And do some simple commands, > like load a binary, set a breakpoint, display register content, etc?
Yes! This is my next step, I'm working on some draft series. It might takes a while. My idea is to have some prototype working, then send as RFC and ask for help. I'll Cc you then. Regards, Phil.
