> On 5/27/19 8:31 PM, Aleksandar Markovic wrote: > > What would be the status of this series? I am willing to integrate all > > this, including all followups, but have hard time sorting out what > > happend after this submission, what is the most complete version etc. > > Can you enlighten me please? > > Thanks for your interest in this series :) > > I was chatting with Thomas about this series earlier today! > I addressed your comment about the ITU/CPS devices, then wanted to join > all the Malta patches in the same series, but there are too many for a > single series so I'll keep them separate.
After some sleep I could remember why I postponed this series: 1/ making the ITU selectable gives: /usr/bin/ld: target/mips/op_helper.o: in function `helper_mtc0_saar': ./target/mips/op_helper.c:1614: undefined reference to `itc_reconfigure' /usr/bin/ld: target/mips/op_helper.o: in function `helper_mthc0_saar': ./target/mips/op_helper.c:1631: undefined reference to `itc_reconfigure' collect2: error: ld returned 1 exit status Anyway it is now selectable but has to be always selected. 2/ I thought only the Malta board was deeply mixed with the X86 ACPI code, but I later noticed the Fulong is too. /usr/bin/ld: ../hw/isa/vt82c686.o: in function `vt82c686b_pm_realize': ./hw/isa/vt82c686.c:381: undefined reference to `acpi_pm_tmr_init' /usr/bin/ld: ./hw/isa/vt82c686.c:382: undefined reference to `acpi_pm1_evt_init' /usr/bin/ld: ../hw/isa/vt82c686.o: in function `pm_update_sci': ./hw/isa/vt82c686.c:195: undefined reference to `acpi_pm1_evt_get_sts' collect2: error: ld returned 1 exit status Both VT82C686B/PIIX4 southbridges require considerable cleanup. I think I now have something workable, but I have to sell my patches correctly to the different subsystem maintainers ;) Regards, Phil.
