On 5/14/19 5:52 PM, Alex Bennée wrote: > There isn't much point building semihosting for platforms that don't > support it. Introduce a new symbol and enable it only for the softmmu > targets that need it. > > Signed-off-by: Alex Bennée <alex.ben...@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <phi...@redhat.com> Tested-by: Philippe Mathieu-Daudé <phi...@redhat.com> > --- > default-configs/arm-softmmu.mak | 1 + > default-configs/lm32-softmmu.mak | 2 + > default-configs/m68k-softmmu.mak | 2 + > default-configs/mips-softmmu-common.mak | 1 + > default-configs/nios2-softmmu.mak | 2 + > default-configs/xtensa-softmmu.mak | 2 + > hw/Kconfig | 1 + > hw/semihosting/Kconfig | 3 ++ > hw/semihosting/Makefile.objs | 2 +- > stubs/Makefile.objs | 1 + > stubs/semihost.c | 66 +++++++++++++++++++++++++ > 11 files changed, 82 insertions(+), 1 deletion(-) > create mode 100644 hw/semihosting/Kconfig > create mode 100644 stubs/semihost.c > > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak > index f23ecfd5c58..1f2e0e7fdeb 100644 > --- a/default-configs/arm-softmmu.mak > +++ b/default-configs/arm-softmmu.mak > @@ -39,3 +39,4 @@ CONFIG_MICROBIT=y > CONFIG_FSL_IMX25=y > CONFIG_FSL_IMX7=y > CONFIG_FSL_IMX6UL=y > +CONFIG_SEMIHOSTING=y > diff --git a/default-configs/lm32-softmmu.mak > b/default-configs/lm32-softmmu.mak > index 6d259665d60..115b3e34c98 100644 > --- a/default-configs/lm32-softmmu.mak > +++ b/default-configs/lm32-softmmu.mak > @@ -4,6 +4,8 @@ > # > #CONFIG_MILKYMIST_TMU2=n # disabling it actually causes compile-time > failures > > +CONFIG_SEMIHOSTING=y > + > # Boards: > # > CONFIG_LM32=y > diff --git a/default-configs/m68k-softmmu.mak > b/default-configs/m68k-softmmu.mak > index e17495e2a0b..4049a8f2ba9 100644 > --- a/default-configs/m68k-softmmu.mak > +++ b/default-configs/m68k-softmmu.mak > @@ -1,5 +1,7 @@ > # Default configuration for m68k-softmmu > > +CONFIG_SEMIHOSTING=y > + > # Boards: > # > CONFIG_AN5206=y > diff --git a/default-configs/mips-softmmu-common.mak > b/default-configs/mips-softmmu-common.mak > index 8e54a74b7a5..e10ac4b20c0 100644 > --- a/default-configs/mips-softmmu-common.mak > +++ b/default-configs/mips-softmmu-common.mak > @@ -35,6 +35,7 @@ CONFIG_MIPS_CPS=y > CONFIG_MIPS_ITU=y > CONFIG_R4K=y > CONFIG_MALTA=y > +CONFIG_SEMIHOSTING=y > CONFIG_PCNET_PCI=y > CONFIG_MIPSSIM=y > CONFIG_ACPI_SMBUS=y > diff --git a/default-configs/nios2-softmmu.mak > b/default-configs/nios2-softmmu.mak > index e130d024e62..1bc4082ea99 100644 > --- a/default-configs/nios2-softmmu.mak > +++ b/default-configs/nios2-softmmu.mak > @@ -1,5 +1,7 @@ > # Default configuration for nios2-softmmu > > +CONFIG_SEMIHOSTING=y > + > # Boards: > # > CONFIG_NIOS2_10M50=y > diff --git a/default-configs/xtensa-softmmu.mak > b/default-configs/xtensa-softmmu.mak > index 7e4d1cc0979..3aa20a47a7f 100644 > --- a/default-configs/xtensa-softmmu.mak > +++ b/default-configs/xtensa-softmmu.mak > @@ -1,5 +1,7 @@ > # Default configuration for Xtensa > > +CONFIG_SEMIHOSTING=y > + > # Boards: > # > CONFIG_XTENSA_SIM=y > diff --git a/hw/Kconfig b/hw/Kconfig > index 88b9f150070..195f541e50c 100644 > --- a/hw/Kconfig > +++ b/hw/Kconfig > @@ -29,6 +29,7 @@ source pci/Kconfig > source rdma/Kconfig > source scsi/Kconfig > source sd/Kconfig > +source semihosting/Kconfig > source smbios/Kconfig > source ssi/Kconfig > source timer/Kconfig > diff --git a/hw/semihosting/Kconfig b/hw/semihosting/Kconfig > new file mode 100644 > index 00000000000..efe0a30734c > --- /dev/null > +++ b/hw/semihosting/Kconfig > @@ -0,0 +1,3 @@ > + > +config SEMIHOSTING > + bool > diff --git a/hw/semihosting/Makefile.objs b/hw/semihosting/Makefile.objs > index 546954f4ff4..09c19bf19ed 100644 > --- a/hw/semihosting/Makefile.objs > +++ b/hw/semihosting/Makefile.objs > @@ -1 +1 @@ > -common-obj-$(CONFIG_SOFTMMU) += config.o > +obj-$(CONFIG_SEMIHOSTING) += config.o > diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs > index 269dfa58326..e0d4f11b348 100644 > --- a/stubs/Makefile.objs > +++ b/stubs/Makefile.objs > @@ -39,3 +39,4 @@ stub-obj-y += xen-hvm.o > stub-obj-y += pci-host-piix.o > stub-obj-y += ram-block.o > stub-obj-y += ramfb.o > +stub-obj-$(CONFIG_SOFTMMU) += semihost.o > diff --git a/stubs/semihost.c b/stubs/semihost.c > new file mode 100644 > index 00000000000..1a4e88e5326 > --- /dev/null > +++ b/stubs/semihost.c > @@ -0,0 +1,66 @@ > +/* > + * Semihosting Stubs for SoftMMU > + * > + * Copyright (c) 2019 Linaro Ltd > + * > + * Stubs for SoftMMU targets that don't actually do semihosting. > + * > + * SPDX-License-Identifier: GPL-2.0-or-later > + */ > + > +#include "qemu/osdep.h" > +#include "qemu/option.h" > +#include "qemu/error-report.h" > +#include "hw/semihosting/semihost.h" > + > +/* Empty config */ > +QemuOptsList qemu_semihosting_config_opts = { > + .name = "", > + .head = QTAILQ_HEAD_INITIALIZER(qemu_semihosting_config_opts.head), > + .desc = { > + { /* end of list */ } > + }, > +}; > + > +/* Queries to config status default to off */ > +bool semihosting_enabled(void) > +{ > + return false; > +} > + > +SemihostingTarget semihosting_get_target(void) > +{ > + return SEMIHOSTING_TARGET_AUTO; > +} > + > +/* > + * All the rest are empty subs. We could g_assert_not_reached() but > + * that adds extra weight to the final binary. Waste not want not. > + */ > +void qemu_semihosting_enable(void) > +{ > +} > + > +int qemu_semihosting_config_options(const char *optarg) > +{ > + return 1; > +} > + > +const char *semihosting_get_arg(int i) > +{ > + return NULL; > +} > + > +int semihosting_get_argc(void) > +{ > + return 0; > +} > + > +const char *semihosting_get_cmdline(void) > +{ > + return NULL; > +} > + > +void semihosting_arg_fallback(const char *file, const char *cmd) > +{ > +} >