On Sun, Mar 13, 2011 at 03:44:02PM +0100, Stefan Weil wrote:
> Replace endianess -> endianness.
>
> Signed-off-by: Stefan Weil <w...@mail.berlios.de>
> ---
> audio/sdlaudio.c | 20 ++++++++++----------
> block/vdi.c | 4 ++--
> target-microblaze/translate.c | 2 +-
> target-mips/cpu.h | 2 +-
> usb-bsd.c | 2 +-
> 5 files changed, 15 insertions(+), 15 deletions(-)
Thanks, applied.
> diff --git a/audio/sdlaudio.c b/audio/sdlaudio.c
> index b74dcfa..04fb9f4 100644
> --- a/audio/sdlaudio.c
> +++ b/audio/sdlaudio.c
> @@ -139,36 +139,36 @@ static int aud_to_sdlfmt (audfmt_e fmt)
> }
> }
>
> -static int sdl_to_audfmt (int sdlfmt, audfmt_e *fmt, int *endianess)
> +static int sdl_to_audfmt(int sdlfmt, audfmt_e *fmt, int *endianness)
> {
> switch (sdlfmt) {
> case AUDIO_S8:
> - *endianess = 0;
> + *endianness = 0;
> *fmt = AUD_FMT_S8;
> break;
>
> case AUDIO_U8:
> - *endianess = 0;
> + *endianness = 0;
> *fmt = AUD_FMT_U8;
> break;
>
> case AUDIO_S16LSB:
> - *endianess = 0;
> + *endianness = 0;
> *fmt = AUD_FMT_S16;
> break;
>
> case AUDIO_U16LSB:
> - *endianess = 0;
> + *endianness = 0;
> *fmt = AUD_FMT_U16;
> break;
>
> case AUDIO_S16MSB:
> - *endianess = 1;
> + *endianness = 1;
> *fmt = AUD_FMT_S16;
> break;
>
> case AUDIO_U16MSB:
> - *endianess = 1;
> + *endianness = 1;
> *fmt = AUD_FMT_U16;
> break;
>
> @@ -338,7 +338,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct
> audsettings *as)
> SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
> SDLAudioState *s = &glob_sdl;
> SDL_AudioSpec req, obt;
> - int endianess;
> + int endianness;
> int err;
> audfmt_e effective_fmt;
> struct audsettings obt_as;
> @@ -354,7 +354,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct
> audsettings *as)
> return -1;
> }
>
> - err = sdl_to_audfmt (obt.format, &effective_fmt, &endianess);
> + err = sdl_to_audfmt(obt.format, &effective_fmt, &endianness);
> if (err) {
> sdl_close (s);
> return -1;
> @@ -363,7 +363,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct
> audsettings *as)
> obt_as.freq = obt.freq;
> obt_as.nchannels = obt.channels;
> obt_as.fmt = effective_fmt;
> - obt_as.endianness = endianess;
> + obt_as.endianness = endianness;
>
> audio_pcm_init_info (&hw->info, &obt_as);
> hw->samples = obt.samples;
> diff --git a/block/vdi.c b/block/vdi.c
> index 116b25b..083266e 100644
> --- a/block/vdi.c
> +++ b/block/vdi.c
> @@ -113,7 +113,7 @@ void uuid_unparse(const uuid_t uu, char *out);
> */
> #define VDI_TEXT "<<< QEMU VM Virtual Disk Image >>>\n"
>
> -/* Unallocated blocks use this index (no need to convert endianess). */
> +/* Unallocated blocks use this index (no need to convert endianness). */
> #define VDI_UNALLOCATED UINT32_MAX
>
> #if !defined(CONFIG_UUID)
> @@ -194,7 +194,7 @@ typedef struct {
> uint32_t block_sectors;
> /* First sector of block map. */
> uint32_t bmap_sector;
> - /* VDI header (converted to host endianess). */
> + /* VDI header (converted to host endianness). */
> VdiHeader header;
> } BDRVVdiState;
>
> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> index fdb2b40..b54b169 100644
> --- a/target-microblaze/translate.c
> +++ b/target-microblaze/translate.c
> @@ -923,7 +923,7 @@ static void dec_load(DisasContext *dc)
> /*
> * When doing reverse accesses we need to do two things.
> *
> - * 1. Reverse the address wrt endianess.
> + * 1. Reverse the address wrt endianness.
> * 2. Byteswap the data lanes on the way back into the CPU core.
> */
> if (rev && size != 4) {
> diff --git a/target-mips/cpu.h b/target-mips/cpu.h
> index 2419aa9..0b98d10 100644
> --- a/target-mips/cpu.h
> +++ b/target-mips/cpu.h
> @@ -63,7 +63,7 @@ union fpr_t {
> uint32_t w[2]; /* binary single fixed-point */
> };
> /* define FP_ENDIAN_IDX to access the same location
> - * in the fpr_t union regardless of the host endianess
> + * in the fpr_t union regardless of the host endianness
> */
> #if defined(HOST_WORDS_BIGENDIAN)
> # define FP_ENDIAN_IDX 1
> diff --git a/usb-bsd.c b/usb-bsd.c
> index abcb60c..e561e1f 100644
> --- a/usb-bsd.c
> +++ b/usb-bsd.c
> @@ -464,7 +464,7 @@ static int usb_host_scan(void *opaque, USBScanFunc *func)
> printf("usb_host_scan: couldn't get device information for
> %s - %s\n",
> devbuf, strerror(errno));
>
> - // XXX: might need to fixup endianess of word values before
> copying over
> + /* XXX: might need to fixup endianness of word values before
> copying over */
>
> vendor_id = dev_info.udi_vendorNo;
> product_id = dev_info.udi_productNo;
> --
> 1.7.2.3
>
>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurel...@aurel32.net http://www.aurel32.net
