Hi Cédric,
On 1/21/19 5:00 PM, Cédric Le Goater wrote:
> JEDEC STANDARD JESD216 for Serial Flash Discovery Parameters (SFDP)
> provides a mean to describe the features of a serial flash device
> using a set of internal parameter tables.
>
> This is the initial framework for the RDSFPD command which is given
> access to a private SFPD area under the flash. This area now needs to
> be populated with the flash device characteristics, presumingly with
> the values from the FlashPartInfo array.
>
> Signed-off-by: Cédric Le Goater <c...@kaod.org>
> ---
> hw/block/m25p80.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index e8dfa14b332f..581a9e1fb82e 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -340,6 +340,7 @@ typedef enum {
> BULK_ERASE = 0xc7,
> READ_FSR = 0x70,
> RDCR = 0x15,
> + RDSFPD = 0x5a,
>
> READ = 0x03,
> READ4 = 0x13,
> @@ -405,6 +406,7 @@ typedef enum {
> STATE_COLLECTING_DATA,
> STATE_COLLECTING_VAR_LEN_DATA,
> STATE_READING_DATA,
> + STATE_READING_SFPD,
> } CMDState;
>
> typedef enum {
> @@ -456,6 +458,8 @@ typedef struct Flash {
>
> int64_t dirty_page;
>
> +#define M25P80_SFPD_AREA_SIZE 0x100
> + uint8_t sfpd_area[M25P80_SFPD_AREA_SIZE];
> const FlashPartInfo *pi;
>
> } Flash;
> @@ -626,6 +630,8 @@ static inline int get_addr_length(Flash *s)
> }
>
> switch (s->cmd_in_progress) {
> + case RDSFPD:
> + return 3;
> case PP4:
> case PP4_4:
> case QPP_4:
> @@ -748,11 +754,55 @@ static void complete_collecting_data(Flash *s)
> " by device\n");
> }
> break;
> +
> + case RDSFPD:
> + if (s->cur_addr < M25P80_SFPD_AREA_SIZE) {
> + s->state = STATE_READING_SFPD;
> + } else {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "M25P80: Invalid SFPD address %#" PRIx32 "\n",
> + s->cur_addr);
> + }
> + break;
> +
> default:
> break;
> }
> }
>
> +static void reset_memory_sfpd(Flash *s)
> +{
> + s->sfpd_area[0x00] = 'S';
> + s->sfpd_area[0x01] = 'F';
> + s->sfpd_area[0x02] = 'P';
> + s->sfpd_area[0x03] = 'D';
> +
> + s->sfpd_area[0x04] = 0x00; /* SFDP Minor Revision Number */
> + s->sfpd_area[0x05] = 0x01; /* SFDP Major Revision Number */
> + s->sfpd_area[0x06] = 0x01; /* Number of Parameter Headers */
> + s->sfpd_area[0x07] = 0xFF; /* Unused */
> +
> + s->sfpd_area[0x08] = 0x00; /* ID Number. 0x0 : JEDEC */
> + s->sfpd_area[0x09] = 0x00; /* Parameter Table Minor Revision */
> + s->sfpd_area[0x0A] = 0x01; /* Parameter Table Major Revision */
> + s->sfpd_area[0x0B] = 0x09; /* Parameter Table Length (DWORD) */
> + s->sfpd_area[0x0C] = 0x30; /* Parameter Table Pointer */
> + s->sfpd_area[0x0D] = 0x00; /* Parameter Table Pointer */
> + s->sfpd_area[0x0E] = 0x00; /* Parameter Table Pointer */
> + s->sfpd_area[0x0F] = 0xFF; /* Unused */
> +
> + s->sfpd_area[0x10] = s->pi->id[0]; /* ID Number. Manufacturer */
> + s->sfpd_area[0x11] = 0x00; /* Parameter Table Minor Revision */
> + s->sfpd_area[0x12] = 0x01; /* Parameter Table Major Revision */
> + s->sfpd_area[0x13] = 0x04; /* Parameter Table Length (DWORD) */
> + s->sfpd_area[0x14] = 0x60; /* Parameter Table Pointer */
> + s->sfpd_area[0x15] = 0x00; /* Parameter Table Pointer */
> + s->sfpd_area[0x16] = 0x00; /* Parameter Table Pointer */
> + s->sfpd_area[0x17] = 0xFF; /* Unused */
> +
> + /* TODO: populate accordingly to chip model */
Shouldn't this be filled with 0xFF meanwhile?
> +}
> +
> static void reset_memory(Flash *s)
> {
> s->cmd_in_progress = NOP;
> @@ -822,6 +872,8 @@ static void reset_memory(Flash *s)
> break;
> }
>
> + reset_memory_sfpd(s);
I understand this info is const, so we can move this to the realize()
function to call it only once. Maybe you can rename it prepare_sfdp() or
build_sfdp()?
> +
> DB_PRINT_L(0, "Reset done.\n");
> }
>
> @@ -1049,6 +1101,13 @@ static void decode_new_cmd(Flash *s, uint32_t value)
> s->state = STATE_READING_DATA;
> break;
>
> + case RDSFPD:
> + s->needed_bytes = get_addr_length(s) + 1 ; /* SFPD addr + dummy */
> + s->pos = 0;
> + s->len = 0;
> + s->state = STATE_COLLECTING_DATA;
> + break;
> +
> case RDCR:
> s->data[0] = s->volatile_cfg & 0xFF;
> s->data[0] |= (!!s->four_bytes_address_mode) << 5;
> @@ -1241,6 +1300,8 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t
> tx)
> }
>
> r = s->data[s->pos];
> + DB_PRINT_L(1, "READ DATA 0x%" PRIx32 "=%" PRIx8 "\n", s->pos,
> + (uint8_t)r);
> s->pos++;
> if (s->pos == s->len) {
> s->pos = 0;
> @@ -1249,6 +1310,12 @@ static uint32_t m25p80_transfer8(SSISlave *ss,
> uint32_t tx)
> }
> }
> break;
> + case STATE_READING_SFPD:
> + r = s->sfpd_area[s->cur_addr];
> + DB_PRINT_L(1, "READ SFPD 0x%" PRIx32 "=%" PRIx8 "\n", s->cur_addr,
> + (uint8_t)r);
> + s->cur_addr = (s->cur_addr + 1) & (M25P80_SFPD_AREA_SIZE - 1);
> + break;
>
> default:
> case STATE_IDLE:
>
