Add 2 clock outputs for each uart (uart0 & 1):
+ the reference clock
+ the bus interface clock
The clock frequencies are computed using the internal pll & uart configuration
registers.
All clocks depend on the main input clock (ps_clk), which is hard-coded
to 33.33MHz (zcu102 evaluation board frequency and frequency specified
in Xilinx's device tree file)
Signed-off-by: Damien Hedde <damien.he...@greensocs.com>
---
hw/misc/zynq_slcr.c | 125 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index baa13d1316..0b599ebd97 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -33,6 +33,8 @@
} \
} while (0)
+#define INPUT_PS_REF_CLK_FREQUENCY (33333333)
+
#define XILINX_LOCK_KEY 0x767b
#define XILINX_UNLOCK_KEY 0xdf0d
@@ -44,15 +46,27 @@ REG32(LOCKSTA, 0x00c)
REG32(ARM_PLL_CTRL, 0x100)
REG32(DDR_PLL_CTRL, 0x104)
REG32(IO_PLL_CTRL, 0x108)
+/* fields for [ARM|DDR|IO_PLL]_CTRL registers */
+ FIELD(xxx_PLL_CTRL, PLL_RESET, 0, 1)
+ FIELD(xxx_PLL_CTRL, PLL_PWRDWN, 1, 1)
+ FIELD(xxx_PLL_CTRL, PLL_BYPASS_QUAL, 3, 1)
+ FIELD(xxx_PLL_CTRL, PLL_BYPASS_FORCE, 4, 1)
+ FIELD(xxx_PLL_CTRL, PLL_FPDIV, 12, 7)
REG32(PLL_STATUS, 0x10c)
REG32(ARM_PLL_CFG, 0x110)
REG32(DDR_PLL_CFG, 0x114)
REG32(IO_PLL_CFG, 0x118)
REG32(ARM_CLK_CTRL, 0x120)
+ FIELD(ARM_CLK_CTRL, SRCSEL, 4, 2)
+ FIELD(ARM_CLK_CTRL, DIVISOR, 8, 6)
+ FIELD(ARM_CLK_CTRL, CPU_1XCLKACT, 27, 1)
+ FIELD(ARM_CLK_CTRL, CPU_PERI_CLKACT, 28, 1)
REG32(DDR_CLK_CTRL, 0x124)
REG32(DCI_CLK_CTRL, 0x128)
REG32(APER_CLK_CTRL, 0x12c)
+ FIELD(APER_CLK_CTRL, UART0_CPU1XCLKACT, 20, 1)
+ FIELD(APER_CLK_CTRL, UART1_CPU1XCLKACT, 21, 1)
REG32(USB0_CLK_CTRL, 0x130)
REG32(USB1_CLK_CTRL, 0x134)
REG32(GEM0_RCLK_CTRL, 0x138)
@@ -63,12 +77,19 @@ REG32(SMC_CLK_CTRL, 0x148)
REG32(LQSPI_CLK_CTRL, 0x14c)
REG32(SDIO_CLK_CTRL, 0x150)
REG32(UART_CLK_CTRL, 0x154)
+ FIELD(UART_CLK_CTRL, CLKACT0, 0, 1)
+ FIELD(UART_CLK_CTRL, CLKACT1, 1, 1)
+ FIELD(UART_CLK_CTRL, SRCSEL, 4, 2)
+ FIELD(UART_CLK_CTRL, DIVISOR, 8, 6)
REG32(SPI_CLK_CTRL, 0x158)
REG32(CAN_CLK_CTRL, 0x15c)
REG32(CAN_MIOCLK_CTRL, 0x160)
REG32(DBG_CLK_CTRL, 0x164)
REG32(PCAP_CLK_CTRL, 0x168)
REG32(TOPSW_CLK_CTRL, 0x16c)
+/* common fields to lots of *_CLK_CTRL registers */
+ FIELD(xxx_CLK_CTRL, SRCSEL, 4, 2)
+ FIELD(xxx_CLK_CTRL, DIVISOR, 8, 6)
#define FPGA_CTRL_REGS(n, start) \
REG32(FPGA ## n ## _CLK_CTRL, (start)) \
@@ -178,8 +199,92 @@ typedef struct ZynqSLCRState {
MemoryRegion iomem;
uint32_t regs[ZYNQ_SLCR_NUM_REGS];
+
+ ClockOut *uart0_amba_clk;
+ ClockOut *uart1_amba_clk;
+ ClockOut *uart0_ref_clk;
+ ClockOut *uart1_ref_clk;
} ZynqSLCRState;
+/*
+ * return the output frequency of ARM/DDR/IO pll
+ * using input frequency and PLL_CTRL register
+ */
+static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg)
+{
+ uint32_t mult = ((ctrl_reg & R_xxx_PLL_CTRL_PLL_FPDIV_MASK) >>
+ R_xxx_PLL_CTRL_PLL_FPDIV_SHIFT);
+
+ /* first, check if pll is bypassed */
+ if (ctrl_reg & R_xxx_PLL_CTRL_PLL_BYPASS_FORCE_MASK) {
+ return input;
+ }
+
+ /* is pll disabled ? */
+ if (ctrl_reg & (R_xxx_PLL_CTRL_PLL_RESET_MASK |
+ R_xxx_PLL_CTRL_PLL_PWRDWN_MASK)) {
+ return 0;
+ }
+
+ return input * mult;
+}
+
+/*
+ * return the output frequency of a clock given:
+ * + the pll's frequencies in an array corresponding to mux's indexes
+ * + the register xxx_CLK_CTRL value
+ * + enable bit index in ctrl register
+ *
+ * This function make the assumption that ctrl_reg value is organized as
follow:
+ * + bits[13:8] clock divisor
+ * + bits[5:4] clock mux selector (index in array)
+ * + bits[index] clock enable
+ */
+static uint64_t zynq_slcr_compute_clock(const uint64_t plls[],
+ uint32_t ctrl_reg,
+ unsigned index)
+{
+ uint32_t divisor = FIELD_EX32(ctrl_reg, xxx_CLK_CTRL, DIVISOR);
+ uint32_t srcsel = FIELD_EX32(ctrl_reg, xxx_CLK_CTRL, SRCSEL);
+
+ if ((ctrl_reg & (1u << index)) == 0) {
+ return 0;
+ }
+
+ return plls[srcsel] / (divisor ? divisor : 1u);
+}
+
+#define ZYNQ_CLOCK(_state, _plls, _reg, _enable_field) \
+ zynq_slcr_compute_clock((_plls), (_state)->regs[R_ ## _reg], \
+ R_ ## _reg ## _ ## _enable_field ## _SHIFT)
+#define ZYNQ_GATE(_state, _clk, _reg, _field) \
+ (ARRAY_FIELD_EX32((_state)->regs, _reg, _field) ? (_clk) : 0)
+
+static void zynq_slcr_compute_clocks(ZynqSLCRState *s)
+{
+ uint64_t ps_clk = INPUT_PS_REF_CLK_FREQUENCY;
+ uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
+ uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
+ uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
+ uint64_t cpu_mux[4] = {arm_pll, arm_pll, ddr_pll, io_pll};
+ uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
+ uint64_t cpu1x_clk;
+
+ /* compute uartX amba clocks */
+ cpu1x_clk = ZYNQ_CLOCK(s, cpu_mux, ARM_CLK_CTRL, CPU_PERI_CLKACT);
+ cpu1x_clk = ZYNQ_GATE(s, cpu1x_clk, ARM_CLK_CTRL, CPU_1XCLKACT);
+ clock_set_frequency(s->uart0_amba_clk,
+ ZYNQ_GATE(s, cpu1x_clk, APER_CLK_CTRL, UART0_CPU1XCLKACT));
+ clock_set_frequency(s->uart1_amba_clk,
+ ZYNQ_GATE(s, cpu1x_clk, APER_CLK_CTRL, UART1_CPU1XCLKACT));
+
+ /* compute uartX ref clocks */
+ clock_set_frequency(s->uart0_ref_clk,
+ ZYNQ_CLOCK(s, uart_mux, UART_CLK_CTRL, CLKACT0));
+ clock_set_frequency(s->uart1_ref_clk,
+ ZYNQ_CLOCK(s, uart_mux, UART_CLK_CTRL, CLKACT1));
+}
+
static void zynq_slcr_reset(DeviceState *d)
{
ZynqSLCRState *s = ZYNQ_SLCR(d);
@@ -274,6 +379,8 @@ static void zynq_slcr_reset(DeviceState *d)
s->regs[R_DDRIOB + 4] = s->regs[R_DDRIOB + 5] = s->regs[R_DDRIOB + 6]
= 0x00000e00;
s->regs[R_DDRIOB + 12] = 0x00000021;
+
+ zynq_slcr_compute_clocks(s);
}
@@ -408,6 +515,14 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
}
break;
+ case R_IO_PLL_CTRL:
+ case R_ARM_PLL_CTRL:
+ case R_DDR_PLL_CTRL:
+ case R_ARM_CLK_CTRL:
+ case R_APER_CLK_CTRL:
+ case R_UART_CLK_CTRL:
+ zynq_slcr_compute_clocks(s);
+ break;
}
}
@@ -417,6 +532,14 @@ static const MemoryRegionOps slcr_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
+static const ClockPortInitArray zynq_slcr_clocks = {
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart0_amba_clk),
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart1_amba_clk),
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart0_ref_clk),
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart1_ref_clk),
+ QDEV_CLOCK_END,
+};
+
static void zynq_slcr_init(Object *obj)
{
ZynqSLCRState *s = ZYNQ_SLCR(obj);
@@ -424,6 +547,8 @@ static void zynq_slcr_init(Object *obj)
memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr",
ZYNQ_SLCR_MMIO_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+
+ qdev_init_clocks(DEVICE(obj), zynq_slcr_clocks);
}
static const VMStateDescription vmstate_zynq_slcr = {
--
2.19.0
