On 9/19/18 7:20 PM, Mark Cave-Ayland wrote:
> As part of commits a64aa5785d "hw: Deprecate -drive if=scsi with non-onboard
> HBAs" and b891538e81 "hw/ppc/prep: Fix implicit creation of "-drive if=scsi"
> devices" the lsi53c895a_create() and lsi53c810_create() functions were added
> to wrap pci_create_simple() and scsi_bus_legacy_handle_cmdline().
>
> Unfortunately this prevents us from changing qdev properties on the device
> and/or changing the PCI configuration. By switching over to using the new
> lsi53c8xx_handle_legacy_cmdline() function then the caller can now configure
> and realize the LSI SCSI device exactly as required.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
> Reviewed-by: Thomas Huth <th...@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
> ---
> hw/arm/realview.c | 3 ++-
> hw/arm/versatilepb.c | 3 ++-
> hw/hppa/machine.c | 4 +++-
> hw/ppc/prep.c | 4 +++-
> 4 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index ab8c14fde3..242f5a87b6 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -257,7 +257,8 @@ static void realview_init(MachineState *machine,
> }
> n = drive_get_max_bus(IF_SCSI);
> while (n >= 0) {
> - lsi53c895a_create(pci_bus);
> + dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
> + lsi53c8xx_handle_legacy_cmdline(dev);
> n--;
> }
> }
> diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c
> index 8b74857059..22b09a1e61 100644
> --- a/hw/arm/versatilepb.c
> +++ b/hw/arm/versatilepb.c
> @@ -278,7 +278,8 @@ static void versatile_init(MachineState *machine, int
> board_id)
> }
> n = drive_get_max_bus(IF_SCSI);
> while (n >= 0) {
> - lsi53c895a_create(pci_bus);
> + dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
> + lsi53c8xx_handle_legacy_cmdline(dev);
> n--;
> }
>
> diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
> index cf7c61c6cc..0fb8fb877e 100644
> --- a/hw/hppa/machine.c
> +++ b/hw/hppa/machine.c
> @@ -59,6 +59,7 @@ static void machine_hppa_init(MachineState *machine)
> const char *kernel_filename = machine->kernel_filename;
> const char *kernel_cmdline = machine->kernel_cmdline;
> const char *initrd_filename = machine->initrd_filename;
> + DeviceState *dev;
> PCIBus *pci_bus;
> ISABus *isa_bus;
> qemu_irq rtc_irq, serial_irq;
> @@ -115,7 +116,8 @@ static void machine_hppa_init(MachineState *machine)
> }
>
> /* SCSI disk setup. */
> - lsi53c895a_create(pci_bus);
> + dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
> + lsi53c8xx_handle_legacy_cmdline(dev);
>
> /* Network setup. e1000 is good enough, failing Tulip support. */
> for (i = 0; i < nb_nics; i++) {
> diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
> index 4bb831c3e6..7e2c70b92a 100644
> --- a/hw/ppc/prep.c
> +++ b/hw/ppc/prep.c
> @@ -700,7 +700,9 @@ static void ibm_40p_init(MachineState *machine)
> qdev_prop_set_uint32(dev, "equipment", 0xc0);
> qdev_init_nofail(dev);
>
> - lsi53c810_create(pci_bus, PCI_DEVFN(1, 0));
> + dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(1, 0),
> + "lsi53c810"));
> + lsi53c8xx_handle_legacy_cmdline(dev);
>
> /* XXX: s3-trio at PCI_DEVFN(2, 0) */
> pci_vga_init(pci_bus);
>
