On 27/08/18 18:12, BALATON Zoltan wrote:
> On Mon, 27 Aug 2018, Mark Cave-Ayland wrote:
>> According to the PReP specification section 6.1.6 "System Interrupt
>> Assignments", all PCI interrupts are routed via IRQ 15.
>>
>> With this patch applied it is now possible to boot the sandalfoot
>> zImage all the way through to a working userspace when using
>> OpenBIOS.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
>> ---
>> hw/ppc/prep.c | 9 +++++----
>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
>> index 162b27a3b8..e82c1355d9 100644
>> --- a/hw/ppc/prep.c
>> +++ b/hw/ppc/prep.c
>> @@ -668,10 +668,11 @@ static void ibm_40p_init(MachineState *machine)
>> dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(11, 0), "i82378"));
>> qdev_connect_gpio_out(dev, 0,
>> cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
>> - sysbus_connect_irq(pcihost, 0, qdev_get_gpio_in(dev, 15));
>> - sysbus_connect_irq(pcihost, 1, qdev_get_gpio_in(dev, 13));
>> - sysbus_connect_irq(pcihost, 2, qdev_get_gpio_in(dev, 15));
>> - sysbus_connect_irq(pcihost, 3, qdev_get_gpio_in(dev, 13));
>> + /* According to PReP specification section 6.1.6 "System Interrupt
>> + * Assignments", all PCI interrupts are routed via IRQ 15 */
>> + for (i = 0; i < PCI_NUM_PINS; i++) {
>> + sysbus_connect_irq(pcihost, i, qdev_get_gpio_in(dev, 15));
>> + }
>
> I'm not sure but this looks similar to what we had with sam460ex:
>
> http://lists.nongnu.org/archive/html/qemu-ppc/2018-07/msg00359.html
>
> I think you may not connect multiple interrupts to the same host irq
> line this way but you either need an OR gate or handle it within the
> mapping in the PCI host model (which is what we ended up with for the
> sam460ex). Peter's suggestion was to do whichever matches real hardware
> the most if you can find out that (as noted here also with more
> explanation that could be useful):
>
> http://lists.nongnu.org/archive/html/qemu-ppc/2018-07/msg00360.html
>
> But I could be mistaken in this case, haven't checked it in detail.
Thanks for the pointer. I now have a follow-up patchset that implements
this, however it seems the real 40p machine has a routing quirk: the LSI
SCSI device is separately routed to IRQ 13. So while it's not quite a
pure OR of the 4 PCI IRQs, it's fairly close...
ATB,
Mark.
