The PL080 and PL081 have three outgoing interrupt lines: * DMACINTERR signals DMA errors * DMACINTTC is the DMA count interrupt * DMACINTR is a combined interrupt, the logical OR of the other two
We currently only implement DMACINTR, because that's all the realview and versatile boards needed, but the instances of the PL081 in the MPS2 firmware images use all three interrupt lines. Implement the missing DMACINTERR and DMACINTTC. Signed-off-by: Peter Maydell <peter.mayd...@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org> --- include/hw/dma/pl080.h | 6 +++++- hw/dma/pl080.c | 13 ++++++++----- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/hw/dma/pl080.h b/include/hw/dma/pl080.h index 7deb46c8578..7c6a4184833 100644 --- a/include/hw/dma/pl080.h +++ b/include/hw/dma/pl080.h @@ -17,7 +17,9 @@ * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0218e/DDI0218.pdf * * QEMU interface: - * + sysbus IRQ: DMACINTR combined interrupt line + * + sysbus IRQ 0: DMACINTR combined interrupt line + * + sysbus IRQ 1: DMACINTERR error interrupt request + * + sysbus IRQ 2: DMACINTTC count interrupt request * + sysbus MMIO region 0: MemoryRegion for the device's registers */ @@ -57,6 +59,8 @@ typedef struct PL080State { /* Flag to avoid recursive DMA invocations. */ int running; qemu_irq irq; + qemu_irq interr; + qemu_irq inttc; } PL080State; #endif diff --git a/hw/dma/pl080.c b/hw/dma/pl080.c index 0f79c2d8a6c..301030dd118 100644 --- a/hw/dma/pl080.c +++ b/hw/dma/pl080.c @@ -75,11 +75,12 @@ static const unsigned char pl081_id[] = static void pl080_update(PL080State *s) { - if ((s->tc_int & s->tc_mask) - || (s->err_int & s->err_mask)) - qemu_irq_raise(s->irq); - else - qemu_irq_lower(s->irq); + bool tclevel = (s->tc_int & s->tc_mask); + bool errlevel = (s->err_int & s->err_mask); + + qemu_set_irq(s->interr, errlevel); + qemu_set_irq(s->inttc, tclevel); + qemu_set_irq(s->irq, errlevel || tclevel); } static void pl080_run(PL080State *s) @@ -352,6 +353,8 @@ static void pl080_init(Object *obj) memory_region_init_io(&s->iomem, OBJECT(s), &pl080_ops, s, "pl080", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + sysbus_init_irq(sbd, &s->interr); + sysbus_init_irq(sbd, &s->inttc); s->nchannels = 8; } -- 2.18.0
