From: Aleksandar Rikalo <arik...@wavecomp.com>
Add a field in hflags for MT bit, and functions check_mt() and
check_cp0_mt().
Reviewed-by: Aleksandar Markovic <amarko...@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarko...@wavecomp.com>
Signed-off-by: Stefan Markovic <smarko...@wavecomp.com>
---
target/mips/cpu.h | 3 ++-
target/mips/internal.h | 6 +++++-
target/mips/translate.c | 29 +++++++++++++++++++++++++++++
3 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/target/mips/cpu.h b/target/mips/cpu.h
index 02ea91e..8a8782b 100644
--- a/target/mips/cpu.h
+++ b/target/mips/cpu.h
@@ -554,7 +554,7 @@ struct CPUMIPSState {
#define EXCP_INST_NOTAVAIL 0x2 /* No valid instruction word for BadInstr */
uint32_t hflags; /* CPU State */
/* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK 0x3F5807FF
+#define MIPS_HFLAG_TMASK 0x7F5807FF
#define MIPS_HFLAG_MODE 0x00007 /* execution modes */
/* The KSU flags must be the lowest bits in hflags. The flag order
must be the same as defined for CP0 Status. This allows to use
@@ -606,6 +606,7 @@ struct CPUMIPSState {
#define MIPS_HFLAG_ITC_CACHE 0x8000000 /* CACHE instr. operates on ITC tag */
#define MIPS_HFLAG_ERL 0x10000000 /* error level flag */
#define MIPS_HFLAG_XNP 0x20000000
+#define MIPS_HFLAG_MT 0x40000000
target_ulong btarget; /* Jump / branch target */
target_ulong bcond; /* Branch condition (if needed) */
diff --git a/target/mips/internal.h b/target/mips/internal.h
index 97485da..c0e447b 100644
--- a/target/mips/internal.h
+++ b/target/mips/internal.h
@@ -308,7 +308,8 @@ static inline void compute_hflags(CPUMIPSState *env)
MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU |
MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2 |
MIPS_HFLAG_SBRI | MIPS_HFLAG_MSA | MIPS_HFLAG_FRE |
- MIPS_HFLAG_ELPA | MIPS_HFLAG_ERL | MIPS_HFLAG_XNP);
+ MIPS_HFLAG_ELPA | MIPS_HFLAG_ERL | MIPS_HFLAG_XNP |
+ MIPS_HFLAG_MT);
if (env->CP0_Status & (1 << CP0St_ERL)) {
env->hflags |= MIPS_HFLAG_ERL;
}
@@ -405,6 +406,9 @@ static inline void compute_hflags(CPUMIPSState *env)
if (env->CP0_Config5 & (1 << CP0C5_XNP)) {
env->hflags |= MIPS_HFLAG_XNP;
}
+ if (env->CP0_Config3 & (1 << CP0C3_MT)) {
+ env->hflags |= MIPS_HFLAG_MT;
+ }
}
void cpu_mips_tlb_flush(CPUMIPSState *env);
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 35342e2..d827d3b 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -1913,6 +1913,35 @@ static inline void check_xnp(DisasContext *ctx)
}
}
+/*
+ * This code generates a "reserved instruction" exception if the
+ * Config5 MT bit is NOT set.
+ */
+static inline void check_mt(DisasContext *ctx)
+{
+ if (unlikely(!(ctx->hflags & MIPS_HFLAG_MT))) {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+}
+
+/*
+ * This code generates a "coprocessor unusable" exception if CP0 is not
+ * available, and, if that is not the case, generates a "reserved instruction"
+ * exception if the Config5 MT bit is NOT set. This is needed for availability
+ * control of some of MT ASE instructions.
+ */
+static inline void check_cp0_mt(DisasContext *ctx)
+{
+ if (unlikely(!(ctx->hflags & MIPS_HFLAG_CP0))) {
+ generate_exception_err(ctx, EXCP_CpU, 0);
+ } else {
+ if (unlikely(!(ctx->hflags & MIPS_HFLAG_MT))) {
+ generate_exception_err(ctx, EXCP_RI, 0);
+ }
+ }
+}
+
+
/* Define small wrappers for gen_load_fpr* so that we have a uniform
calling interface for 32 and 64-bit FPRs. No sense in changing
--
2.7.4
