On 06/28/2018 04:34 PM, BALATON Zoltan wrote: > On Thu, 28 Jun 2018, Cédric Le Goater wrote: >> I have tried an ISO from : >> >> http://aros.sourceforge.net/nightly1.php >> >> which boots and writes : >> >> U-Boot 2010.06.05 (Oct 22 2017 - 17:40:02) >> >> CPU: AMCC PowerPC 460EX Rev. B at 1150 MHz (PLB=230 OPB=115 EBC=115) >> No Security/Kasumi support >> Bootstrap Option A - Boot ROM Location EBC (8 bits) >> Internal PCI arbiter disabled >> 32 kB I-Cache 32 kB D-Cache >> Board: Sam460ex, PCIe 4x + SATA-2 >> I2C: ready >> DRAM: 512 MiB (ECC not enabled, 460 MHz, CL0) >> *** Warning - bad CRC, using default environment >> >> PCI: Bus Dev VenId DevId Class Int >> 00 06 126f 0501 0380 00 >> PCIE1: successfully set as root-complex >> Net: ppc_4xx_eth0 >> FPGA: Revision 00 (20 0-00-00) >> SM502: found >> VGA: NO CARDS > > This is the U-Boot firmware that prints this. > >> and on the graphic window : >> >> FLB: no SLB found in any of the designated boot sources, returning to >> u-boot. > > And also this is from U-Boot saying it could not find bootable image so it > did not boot. (One could test i2c from u_boot with date and i2c commands as > well.) > >> the graphical bool loader menu works but I couldn't exercise much more the >> system. > > Have you by chance used the -cdrom shortcut? That tries to connect CDROM to > secondary master but the sii3112 this board uses only has 2 SATA ports so > this won't work. You need to use the long options like > > -drive if=none,id=cd,file=aros-sam440-ppc.iso,format=raw \ > -device ide-cd,drive=cd,bus=ide.0 > > I'm not sure how to fix -cdrom or have it print a meaningful warning or error.
Looks good : [BATT] i2c=011bc904 [BATT] Probing i2c RTC... [BATT] RTC found. Object=011ba234 [BATT] Dump: 35 46 15 04 28 06 18 C.
