On 2018-06-15 04:07, Jason Wang wrote:
>
>
> On 2018年06月13日 10:29, Jason Wang wrote:
>>
>>
>> On 2018年06月13日 10:26, Philippe Mathieu-Daudé wrote:
>>> Hi Jason,
>>>
>>> On 06/12/2018 11:18 PM, Jason Wang wrote:
>>>> On 2018年06月13日 03:00, Philippe Mathieu-Daudé wrote:
>>>>> Cc'ing Jason who is also listed as co-maintainer:
>>>>>
>>>>> ./scripts/get_maintainer.pl -f hw/net/e1000e_core.c
>>>>> Dmitry Fleytman <dmitry.fleyt...@gmail.com> (maintainer:e1000e)
>>>>> Jason Wang <jasow...@redhat.com> (odd fixer:Network devices)
>>>>>
>>>>> On 06/12/2018 03:43 PM, Jan Kiszka wrote:
>>>>>> On 2018-06-12 20:38, Philippe Mathieu-Daudé wrote:
>>>>>>> On 06/12/2018 03:30 PM, Jan Kiszka wrote:
>>>>>>>> On 2018-06-12 20:11, Philippe Mathieu-Daudé wrote:
>>>>>>>>> Hi Jan,
>>>>>>>>>
>>>>>>>>> On 06/12/2018 02:22 PM, Jan Kiszka wrote:
>>>>>>>>>> On 2018-05-22 09:00, Jan Kiszka wrote:
>>>>>>>>>>> On 2018-04-16 17:29, Peter Maydell wrote:
>>>>>>>>>>>> On 16 April 2018 at 16:25, Jan Kiszka <jan.kis...@siemens.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>> On 2018-04-01 23:17, Jan Kiszka wrote:
>>>>>>>>>>>>>> From: Jan Kiszka <jan.kis...@siemens.com>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The spec does not justify clearing of any
>>>>>>>>>>>>>> E1000_ICR_OTHER_CAUSES when
>>>>>>>>>>>>>> E1000_ICR_OTHER is set in EIAC. In fact, removing this code
>>>>>>>>>>>>>> fixes the
>>>>>>>>>>>>>> issue the Linux driver runs into since 4aea7a5c5e94 ("e1000e:
>>>>>>>>>>>>>> Avoid
>>>>>>>>>>>>>> receiver overrun interrupt bursts") and was worked around by
>>>>>>>>>>>>>> 745d0bd3af99 ("e1000e: Remove Other from EIAC").
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This resolves the issue I reported on February 18 ("e1000e:
>>>>>>>>>>>>>> MSI-X
>>>>>>>>>>>>>> problem with recent Linux drivers").
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> hw/net/e1000e_core.c | 4 ----
>>>>>>>>>>>>>> 1 file changed, 4 deletions(-)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
>>>>>>>>>>>>>> index ecf9b15555..d38f025c0f 100644
>>>>>>>>>>>>>> --- a/hw/net/e1000e_core.c
>>>>>>>>>>>>>> +++ b/hw/net/e1000e_core.c
>>>>>>>>>>>>>> @@ -2022,10 +2022,6 @@ e1000e_msix_notify_one(E1000ECore
>>>>>>>>>>>>>> *core, uint32_t cause, uint32_t int_cfg)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> effective_eiac = core->mac[EIAC] & cause;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - if (effective_eiac == E1000_ICR_OTHER) {
>>>>>>>>>>>>>> - effective_eiac |= E1000_ICR_OTHER_CAUSES;
>>>>>>>>>>>>>> - }
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>> core->mac[ICR] &= ~effective_eiac;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> if (!(core->mac[CTRL_EXT] & E1000_CTRL_EXT_IAME)) {
>>>>>>>>>>>>>>
>>>>>>>>>>>>> Ping for this - as well as
>>>>>>>>>>>>> https://patchwork.ozlabs.org/patch/895476.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Given that q35 uses e1000e by default and many Linux kernel
>>>>>>>>>>>>> versions no
>>>>>>>>>>>>> longer work, this should likely go into upcoming and stable
>>>>>>>>>>>>> versions
>>>>>>>>>>>> I'd rather not put it into 2.12 at this point in the release
>>>>>>>>>>>> cycle unless it's a regression from 2.11, I think.
>>>>>>>>>>> Second ping - nothing hit the repo so far, nor did I receive
>>>>>>>>>>> feedback.
>>>>>>>>>>>
>>>>>>>>>> And another ping. For both.
>>>>>>>>>>
>>>>>>>>>> These days I had to help someone with a broken QEMU setup that
>>>>>>>>>> failed
>>>>>>>>>> installing from network. It turned out that "modprobe e1000e
>>>>>>>>>> IntMode=0"
>>>>>>>>>> was needed to workaround the issues my patches address.
>>>>>>>>> What about the IMS register? It is set just after.
>>>>>>>>>
>>>>>>>>> Looking at b38636b8372, can you test this patch?
>>>>>>>>>
>>>>>>>>> -- >8 --
>>>>>>>>> diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
>>>>>>>>> index c93c4661ed..a484b68a5a 100644
>>>>>>>>> --- a/hw/net/e1000e_core.c
>>>>>>>>> +++ b/hw/net/e1000e_core.c
>>>>>>>>> @@ -2022,13 +2022,13 @@ e1000e_msix_notify_one(E1000ECore *core,
>>>>>>>>> uint32_t cause, uint32_t int_cfg)
>>>>>>>>>
>>>>>>>>> effective_eiac = core->mac[EIAC] & cause;
>>>>>>>>>
>>>>>>>>> - if (effective_eiac == E1000_ICR_OTHER) {
>>>>>>>>> - effective_eiac |= E1000_ICR_OTHER_CAUSES;
>>>>>>>>> - }
>>>>>>>>> -
>>>>>>>>> core->mac[ICR] &= ~effective_eiac;
>>>>>>>>>
>>>>>>>>> if (!(core->mac[CTRL_EXT] & E1000_CTRL_EXT_IAME)) {
>>>>>>>>> + if (effective_eiac == E1000_ICR_OTHER) {
>>>>>>>>> + effective_eiac |= E1000_ICR_OTHER_CAUSES;
>>>>>>>>> + }
>>>>>>>>> +
>>>>>>>>> core->mac[IMS] &= ~effective_eiac;
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>>
>>>>>>>> Before testing this: What would be the reasoning for this change?
>>>>>>> Not breaking the purpose of b38636b8372 :)
>>>>>> I disagree on this expansion of bit 31 ("other causes"). I see no
>>>>>> indication in the spec that setting this bit for autoclear has more
>>>>>> impact than on the very same bit itself. Therefore I'm asking for a
>>>>>> reasoning - based on the spec.
>>>>> Interrupt Cause Registers
>>>>>
>>>>> Other bits in this register are the legacy indication of
>>>>> interrupts as the MDIC complete, management and link status
>>>>> change. There is a specific Other Cause bit that is set if
>>>>> one of these bits are set, this bit can be mapped to a
>>>>> specific MSI-X interrupt message.
>>>>>
>>>>> I spent half an hour reading the relevant parts of the spec and can't
>>>>> figure out, so I'll let the authors of b38636b8372 to review your
>>>>> patch.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Phil.
>>>> Looking at EIAC part of the spec:
>>>>
>>>> Bits 24:20 in this register enables clearing of the corresponding
>>>> bit in
>>>> ICR following
>>>> interrupt generation. When a bit is set, the corresponding bit in ICR
>>>> and in IMS is
>>>> automatically cleared following an interrupt.
>>> Thanks for looking at this.
>>>
>>>> It looks to me that only the other bit itself need to be cleared.
>>> So no need to set the other_causes bits, thus Jan patch is correct?
>>>
>>> Thanks,
>>>
>>> Phil.
>>>
>>
>> Yes, I think so. But I think we can wait for few days to see if Dmitry
>> have come comments.
>>
>> Thanks
>>
>
> Ok, I applied this first.
Thanks.
Did you already have a look at https://patchwork.ozlabs.org/patch/895476
as well?
Jan
