Vm just hang in Escape character , there is no error ..but from the qemu control window i am able to see sdc is passthrough
Regards Nitin On Fri, Mar 16, 2018 at 1:16 PM, Fam Zheng <f...@redhat.com> wrote: > On Mon, Mar 12, 2018 at 4:16 PM, Nitin Gupta <nitin.gupta...@gmail.com> > wrote: > > Hi Stefan > > > > Thanks for your response , i tried the the command provided by you and it > > did not work as well > > somehow i find that after changing the controller to LSI in qemu command > > it started working , please find command below > > > > -device lsi,id=scsi0,bus=pci.0,addr=0xa -drive > > file=/dev/sdc,format=raw,if=none,id=drive-scsi1-0-0-0,cache=none -device > > scsi-block,bus=scsi1.0,channel=0,scsi-id=0,lun=0, > drive=drive-scsi1-0-0-0,id=scsi1-0-0-0 > > > > > > looks like virtio-pci is not able to bind when i am using qemu command , > > its working with virsh(libvirt). > > Can you post the error message you've seen with virtio-scsi? > > Fam > > > > > Regards > > Nitin > > > > On Tue, Mar 6, 2018 at 5:04 PM, Stefan Hajnoczi <stefa...@gmail.com> > wrote: > > > >> On Wed, Feb 21, 2018 at 02:51:38PM +0530, Nitin Gupta wrote: > >> > Please let me know the qemu command for doing ssd virtio-scsi > >> passthrough . > >> > i am able to do the pass through with virsh .but same command when i > am > >> > trying with qemu , VM is not coming up > >> > > >> > Please let me know how can i proceed further . any help will be > >> appreciated > >> > >> Something like this: > >> > >> -drive if=none,id=drive0,file=/dev/sdX,format=raw,aio=native, > cache=none > >> -device virtio-scsi-pci,id=virtio-scsi-pci0 > >> -device scsi-block,drive=drive0,bus=virtio-scsi-pci0.0 > >> > >> Stefan > >> >
