Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org>
---
hw/arm/xlnx-zynqmp.c | 40 +++++++++++++++++++++++++++++-----------
1 file changed, 29 insertions(+), 11 deletions(-)
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 325642058b..c4f6638ab7 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -381,22 +381,40 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error
**errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, gic_spi[SATA_INTR]);
for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) {
- char *bus_name;
-
- object_property_set_bool(OBJECT(&s->sdhci[i]), true,
- "realized", &err);
+ char *bus_name = g_strdup_printf("sd-bus%d", i);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(&s->sdhci[i]);
+ Object *sdhci = OBJECT(&s->sdhci[i]);
+
+ /* Compatible with:
+ * - SD Host Controller Specification Version 3.00
+ * - SDIO Specification Version 3.0
+ * - eMMC Specification Version 4.51
+ *
+ * Host clock rate variable between 0 and 208 MHz
+ * Transfers the data in SDR104, SDR50, DDR50 modes
+ * (SDR104 mode: up to 832Mbits/s using 4 parallel data lines)
+ * Transfers the data in 1 bit and 4 bit SD modes
+ * UHS speed modes, 1.8V
+ * voltage switch, tuning commands
+ */
+ object_property_set_uint(sdhci, 3, "sd-spec-version", &err);
+ object_property_set_uint(sdhci, 0, "timeout-freq", &err);
+ object_property_set_uint(sdhci, 0, "max-frequency", &err);
+ object_property_set_bool(sdhci, true, "suspend", &err);
+ object_property_set_bool(sdhci, false, "adma1", &err);
+ object_property_set_bool(sdhci, true, "64bit", &err);
+ object_property_set_uint(sdhci, 0b111, "bus-speed", &err);
+ object_property_set_uint(sdhci, 0b111, "driver-strength", &err);
+ object_property_set_bool(sdhci, true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
- sdhci_addr[i]);
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
- gic_spi[sdhci_intr[i]]);
+ sysbus_mmio_map(sbd, 0, sdhci_addr[i]);
+ sysbus_connect_irq(sbd, 0, gic_spi[sdhci_intr[i]]);
+
/* Alias controller SD bus to the SoC itself */
- bus_name = g_strdup_printf("sd-bus%d", i);
- object_property_add_alias(OBJECT(s), bus_name,
- OBJECT(&s->sdhci[i]), "sd-bus",
+ object_property_add_alias(OBJECT(s), bus_name, sdhci, "sd-bus",
&error_abort);
g_free(bus_name);
}
--
2.15.1
