Hi Philippe,
Thanks for all your comments!
I will put all this corrections for the next patch, also I removed the
FlexTimer, it is not necessary to do this basic emulation.
Thanks,
Gabriel
On Fri, Oct 20, 2017 at 6:25 PM, Philippe Mathieu-Daudé <f4...@amsat.org>
wrote:
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_SPI, 0x4002C000,
> > + qdev_get_gpio_in(nvic, 31)); *SPI0*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_SPI, 0x4002D000,
> > + qdev_get_gpio_in(nvic, 33)); *SPI1*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_ADC, 0x4003B000,
> > + qdev_get_gpio_in(nvic, 31)); *ADC0*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_DAC, 0x4002F000,
> > + qdev_get_gpio_in(nvic, 33)); *DAC0*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_I2C, 0x40066000,
> > + qdev_get_gpio_in(nvic, 31)); *I2C0*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_I2C, 0x40067000,
> > + qdev_get_gpio_in(nvic, 33)); *I2C1*/
> > +
> > +// sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x4006A000,
> > +// qdev_get_gpio_in(nvic, 31)); /*UART0*/
> > + kinetis_k64_uart_create(0x4006A000, qdev_get_gpio_in(nvic, 31),
> > + serial_hds[0]);
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x4006B000,
> > + qdev_get_gpio_in(nvic, 33)); *UART1*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x4006C000,
> > + qdev_get_gpio_in(nvic, 35)); *UART2*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x4006D000,
> > + qdev_get_gpio_in(nvic, 37)); *UART3*/
> > +
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_SPI, 0x400AC000,
> > + qdev_get_gpio_in(nvic, 65)); *SPI2*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_ADC, 0x400BB000,
> > + qdev_get_gpio_in(nvic, 73)); *ADC1*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_I2C, 0x400E6000,
> > + qdev_get_gpio_in(nvic, 74)); *I2C2*/
> > +
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x400EA000,
> > + qdev_get_gpio_in(nvic, 66)); *UART4*/
> > +/* dev = sysbus_create_simple(TYPE_KINETIS_K64_UART, 0x400EB000,
> > + qdev_get_gpio_in(nvic, 68)); *UART5*/
>
> Just create those with create_unimplemented_device() instead...
>
> > +
> > + create_unimplemented_device("peripheral_bridge_0", 0x40000000,
> 0x1000);
> > + create_unimplemented_device("Crossbar_Switch", 0x40004000,
> 0x1000);
> > + create_unimplemented_device("DMA_Controller", 0x40008000,
> 0x1000);
> > + create_unimplemented_device("DMA_Controller_t", 0x40009000,
> 0x1000);
> > + create_unimplemented_device("FlexBus", 0x4000C000,
> 0x1000);
> > + create_unimplemented_device("MPU", 0x4000D000,
> 0x1000);
> > + create_unimplemented_device("Flash_mem_ctrl", 0x4001F000,
> 0x1000);
> > + create_unimplemented_device("Flash_mem", 0x40020000,
> 0x1000);
> > + create_unimplemented_device("DMA_ch_multiplexer", 0x40021000,
> 0x1000);
> > +}
>
