Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}'
\
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
A "I^2C" was manually replaced with "i2c" in hw/i2c/omap_i2c.c.
Signed-off-by: Alistair Francis <alistair.fran...@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
---
V3:
- Replace "I&2C"
V2:
- Split hw patch into individual directories
hw/i2c/omap_i2c.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/hw/i2c/omap_i2c.c b/hw/i2c/omap_i2c.c
index 26e3e5ebf6..e9da7f9f51 100644
--- a/hw/i2c/omap_i2c.c
+++ b/hw/i2c/omap_i2c.c
@@ -340,13 +340,13 @@ static void omap_i2c_write(void *opaque, hwaddr addr,
break;
}
if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */
- fprintf(stderr, "%s: I^2C slave mode not supported\n",
- __func__);
+ error_report("%s: i2c slave mode not supported",
+ __func__);
break;
}
if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */
- fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
- __func__);
+ error_report("%s: 10-bit addressing mode not supported",
+ __func__);
break;
}
if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */
@@ -393,7 +393,7 @@ static void omap_i2c_write(void *opaque, hwaddr addr,
omap_i2c_interrupts_update(s);
}
if (value & (1 << 15)) /* ST_EN */
- fprintf(stderr, "%s: System Test not supported\n", __func__);
+ error_report("%s: System Test not supported", __func__);
break;
default:
--
2.11.0
