On Thu, Aug 24, 2017 at 9:20 PM Markus Armbruster <arm...@redhat.com> wrote:
> Cc: Paolo Bonzini <pbonz...@redhat.com>
> Signed-off-by: Markus Armbruster <arm...@redhat.com>
>
Nice one
Reviewed-by: Marc-André Lureau <marcandre.lur...@redhat.com>
---
> MAINTAINERS | 1 +
> Makefile | 1 +
> qapi-schema.json | 165 +-----------------------
> qapi/event.json | 182 ---------------------------
> qapi/run-state.json | 352
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 355 insertions(+), 346 deletions(-)
> create mode 100644 qapi/run-state.json
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fb90a19..289ea8c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1338,6 +1338,7 @@ F: cpus.c
> F: util/main-loop.c
> F: util/qemu-timer.c
> F: vl.c
> +F: qapi/run-state.json
>
> Human Monitor (HMP)
> M: Dr. David Alan Gilbert <dgilb...@redhat.com>
> diff --git a/Makefile b/Makefile
> index ca4a03c..d3ba41a 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -413,6 +413,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json
> $(SRC_PATH)/qapi/common.json \
> $(SRC_PATH)/qapi/crypto.json \
> $(SRC_PATH)/qapi/event.json
> $(SRC_PATH)/qapi/introspect.json \
> $(SRC_PATH)/qapi/rocker.json \
> + $(SRC_PATH)/qapi/run-state.json \
> $(SRC_PATH)/qapi/sockets.json \
> $(SRC_PATH)/qapi/trace.json
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index d69b6da..f42d61b 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -80,6 +80,7 @@
>
> { 'include': 'qapi/common.json' }
> { 'include': 'qapi/sockets.json' }
> +{ 'include': 'qapi/run-state.json' }
> { 'include': 'qapi/crypto.json' }
> { 'include': 'qapi/block.json' }
> { 'include': 'qapi/rocker.json' }
> @@ -243,94 +244,6 @@
> { 'command': 'query-kvm', 'returns': 'KvmInfo' }
>
> ##
> -# @RunState:
> -#
> -# An enumeration of VM run states.
> -#
> -# @debug: QEMU is running on a debugger
> -#
> -# @finish-migrate: guest is paused to finish the migration process
> -#
> -# @inmigrate: guest is paused waiting for an incoming migration. Note
> -# that this state does not tell whether the machine will start at the
> -# end of the migration. This depends on the command-line -S option and
> -# any invocation of 'stop' or 'cont' that has happened since QEMU was
> -# started.
> -#
> -# @internal-error: An internal error that prevents further guest execution
> -# has occurred
> -#
> -# @io-error: the last IOP has failed and the device is configured to pause
> -# on I/O errors
> -#
> -# @paused: guest has been paused via the 'stop' command
> -#
> -# @postmigrate: guest is paused following a successful 'migrate'
> -#
> -# @prelaunch: QEMU was started with -S and guest has not started
> -#
> -# @restore-vm: guest is paused to restore VM state
> -#
> -# @running: guest is actively running
> -#
> -# @save-vm: guest is paused to save the VM state
> -#
> -# @shutdown: guest is shut down (and -no-shutdown is in use)
> -#
> -# @suspended: guest is suspended (ACPI S3)
> -#
> -# @watchdog: the watchdog action is configured to pause and has been
> triggered
> -#
> -# @guest-panicked: guest has been panicked as a result of guest OS panic
> -#
> -# @colo: guest is paused to save/restore VM state under colo checkpoint,
> -# VM can not get into this state unless colo capability is enabled
> -# for migration. (since 2.8)
> -##
> -{ 'enum': 'RunState',
> - 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
> - 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
> - 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
> - 'guest-panicked', 'colo' ] }
> -
> -##
> -# @StatusInfo:
> -#
> -# Information about VCPU run state
> -#
> -# @running: true if all VCPUs are runnable, false if not runnable
> -#
> -# @singlestep: true if VCPUs are in single-step mode
> -#
> -# @status: the virtual machine @RunState
> -#
> -# Since: 0.14.0
> -#
> -# Notes: @singlestep is enabled through the GDB stub
> -##
> -{ 'struct': 'StatusInfo',
> - 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'}
> }
> -
> -##
> -# @query-status:
> -#
> -# Query the run status of all VCPUs
> -#
> -# Returns: @StatusInfo reflecting all VCPUs
> -#
> -# Since: 0.14.0
> -#
> -# Example:
> -#
> -# -> { "execute": "query-status" }
> -# <- { "return": { "running": true,
> -# "singlestep": false,
> -# "status": "running" } }
> -#
> -##
> -{ 'command': 'query-status', 'returns': 'StatusInfo' }
> -
> -##
> # @UuidInfo:
> #
> # Guest UUID information (Universally Unique Identifier).
> @@ -6017,34 +5930,6 @@
> { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
>
> ##
> -# @WatchdogExpirationAction:
> -#
> -# An enumeration of the actions taken when the watchdog device's timer is
> -# expired
> -#
> -# @reset: system resets
> -#
> -# @shutdown: system shutdown, note that it is similar to @powerdown, which
> -# tries to set to system status and notify guest
> -#
> -# @poweroff: system poweroff, the emulator program exits
> -#
> -# @pause: system pauses, similar to @stop
> -#
> -# @debug: system enters debug state
> -#
> -# @none: nothing is done
> -#
> -# @inject-nmi: a non-maskable interrupt is injected into the first VCPU
> (all
> -# VCPUS on x86) (since 2.4)
> -#
> -# Since: 2.1
> -##
> -{ 'enum': 'WatchdogExpirationAction',
> - 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none',
> - 'inject-nmi' ] }
> -
> -##
> # @IoOperationType:
> #
> # An enumeration of the I/O operation types
> @@ -6059,54 +5944,6 @@
> 'data': [ 'read', 'write' ] }
>
> ##
> -# @GuestPanicAction:
> -#
> -# An enumeration of the actions taken when guest OS panic is detected
> -#
> -# @pause: system pauses
> -#
> -# Since: 2.1 (poweroff since 2.8)
> -##
> -{ 'enum': 'GuestPanicAction',
> - 'data': [ 'pause', 'poweroff' ] }
> -
> -##
> -# @GuestPanicInformationType:
> -#
> -# An enumeration of the guest panic information types
> -#
> -# Since: 2.9
> -##
> -{ 'enum': 'GuestPanicInformationType',
> - 'data': [ 'hyper-v'] }
> -
> -##
> -# @GuestPanicInformation:
> -#
> -# Information about a guest panic
> -#
> -# Since: 2.9
> -##
> -{'union': 'GuestPanicInformation',
> - 'base': {'type': 'GuestPanicInformationType'},
> - 'discriminator': 'type',
> - 'data': { 'hyper-v': 'GuestPanicInformationHyperV' } }
> -
> -##
> -# @GuestPanicInformationHyperV:
> -#
> -# Hyper-V specific guest panic information (HV crash MSRs)
> -#
> -# Since: 2.9
> -##
> -{'struct': 'GuestPanicInformationHyperV',
> - 'data': { 'arg1': 'uint64',
> - 'arg2': 'uint64',
> - 'arg3': 'uint64',
> - 'arg4': 'uint64',
> - 'arg5': 'uint64' } }
> -
> -##
> # @rtc-reset-reinjection:
> #
> # This command will reset the RTC interrupt reinjection backlog.
> diff --git a/qapi/event.json b/qapi/event.json
> index 6d22b02..9c6126d 100644
> --- a/qapi/event.json
> +++ b/qapi/event.json
> @@ -5,144 +5,6 @@
> ##
>
> ##
> -# @SHUTDOWN:
> -#
> -# Emitted when the virtual machine has shut down, indicating that qemu is
> -# about to exit.
> -#
> -# @guest: If true, the shutdown was triggered by a guest request (such as
> -# a guest-initiated ACPI shutdown request or other hardware-specific
> action)
> -# rather than a host request (such as sending qemu a SIGINT). (since 2.10)
> -#
> -# Note: If the command-line option "-no-shutdown" has been specified,
> qemu will
> -# not exit, and a STOP event will eventually follow the SHUTDOWN event
> -#
> -# Since: 0.12.0
> -#
> -# Example:
> -#
> -# <- { "event": "SHUTDOWN", "data": { "guest": true },
> -# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
> -#
> -##
> -{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool' } }
> -
> -##
> -# @POWERDOWN:
> -#
> -# Emitted when the virtual machine is powered down through the power
> control
> -# system, such as via ACPI.
> -#
> -# Since: 0.12.0
> -#
> -# Example:
> -#
> -# <- { "event": "POWERDOWN",
> -# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
> -#
> -##
> -{ 'event': 'POWERDOWN' }
> -
> -##
> -# @RESET:
> -#
> -# Emitted when the virtual machine is reset
> -#
> -# @guest: If true, the reset was triggered by a guest request (such as
> -# a guest-initiated ACPI reboot request or other hardware-specific action)
> -# rather than a host request (such as the QMP command system_reset).
> -# (since 2.10)
> -#
> -# Since: 0.12.0
> -#
> -# Example:
> -#
> -# <- { "event": "RESET", "data": { "guest": false },
> -# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
> -#
> -##
> -{ 'event': 'RESET', 'data': { 'guest': 'bool' } }
> -
> -##
> -# @STOP:
> -#
> -# Emitted when the virtual machine is stopped
> -#
> -# Since: 0.12.0
> -#
> -# Example:
> -#
> -# <- { "event": "STOP",
> -# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
> -#
> -##
> -{ 'event': 'STOP' }
> -
> -##
> -# @RESUME:
> -#
> -# Emitted when the virtual machine resumes execution
> -#
> -# Since: 0.12.0
> -#
> -# Example:
> -#
> -# <- { "event": "RESUME",
> -# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
> -#
> -##
> -{ 'event': 'RESUME' }
> -
> -##
> -# @SUSPEND:
> -#
> -# Emitted when guest enters a hardware suspension state, for example, S3
> state,
> -# which is sometimes called standby state
> -#
> -# Since: 1.1
> -#
> -# Example:
> -#
> -# <- { "event": "SUSPEND",
> -# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
> -#
> -##
> -{ 'event': 'SUSPEND' }
> -
> -##
> -# @SUSPEND_DISK:
> -#
> -# Emitted when guest enters a hardware suspension state with data saved on
> -# disk, for example, S4 state, which is sometimes called hibernate state
> -#
> -# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this
> state
> -#
> -# Since: 1.2
> -#
> -# Example:
> -#
> -# <- { "event": "SUSPEND_DISK",
> -# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
> -#
> -##
> -{ 'event': 'SUSPEND_DISK' }
> -
> -##
> -# @WAKEUP:
> -#
> -# Emitted when the guest has woken up from suspend state and is running
> -#
> -# Since: 1.1
> -#
> -# Example:
> -#
> -# <- { "event": "WAKEUP",
> -# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
> -#
> -##
> -{ 'event': 'WAKEUP' }
> -
> -##
> # @RTC_CHANGE:
> #
> # Emitted when the guest changes the RTC time.
> @@ -165,30 +27,6 @@
> 'data': { 'offset': 'int' } }
>
> ##
> -# @WATCHDOG:
> -#
> -# Emitted when the watchdog device's timer is expired
> -#
> -# @action: action that has been taken
> -#
> -# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
> -# followed respectively by the RESET, SHUTDOWN, or STOP events
> -#
> -# Note: This event is rate-limited.
> -#
> -# Since: 0.13.0
> -#
> -# Example:
> -#
> -# <- { "event": "WATCHDOG",
> -# "data": { "action": "reset" },
> -# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
> -#
> -##
> -{ 'event': 'WATCHDOG',
> - 'data': { 'action': 'WatchdogExpirationAction' } }
> -
> -##
> # @DEVICE_DELETED:
> #
> # Emitted whenever the device removal completion is acknowledged by the
> guest.
> @@ -491,26 +329,6 @@
> 'data': { 'actual': 'int' } }
>
> ##
> -# @GUEST_PANICKED:
> -#
> -# Emitted when guest OS panic is detected
> -#
> -# @action: action that has been taken, currently always "pause"
> -#
> -# @info: information about a panic (since 2.9)
> -#
> -# Since: 1.5
> -#
> -# Example:
> -#
> -# <- { "event": "GUEST_PANICKED",
> -# "data": { "action": "pause" } }
> -#
> -##
> -{ 'event': 'GUEST_PANICKED',
> - 'data': { 'action': 'GuestPanicAction', '*info':
> 'GuestPanicInformation' } }
> -
> -##
> # @QUORUM_FAILURE:
> #
> # Emitted by the Quorum block driver if it fails to establish a quorum
> diff --git a/qapi/run-state.json b/qapi/run-state.json
> new file mode 100644
> index 0000000..d36ff49
> --- /dev/null
> +++ b/qapi/run-state.json
> @@ -0,0 +1,352 @@
> +# -*- Mode: Python -*-
> +#
> +
> +##
> +# = VM run state
> +##
> +
> +##
> +# @RunState:
> +#
> +# An enumeration of VM run states.
> +#
> +# @debug: QEMU is running on a debugger
> +#
> +# @finish-migrate: guest is paused to finish the migration process
> +#
> +# @inmigrate: guest is paused waiting for an incoming migration. Note
> +# that this state does not tell whether the machine will start at the
> +# end of the migration. This depends on the command-line -S option and
> +# any invocation of 'stop' or 'cont' that has happened since QEMU was
> +# started.
> +#
> +# @internal-error: An internal error that prevents further guest execution
> +# has occurred
> +#
> +# @io-error: the last IOP has failed and the device is configured to pause
> +# on I/O errors
> +#
> +# @paused: guest has been paused via the 'stop' command
> +#
> +# @postmigrate: guest is paused following a successful 'migrate'
> +#
> +# @prelaunch: QEMU was started with -S and guest has not started
> +#
> +# @restore-vm: guest is paused to restore VM state
> +#
> +# @running: guest is actively running
> +#
> +# @save-vm: guest is paused to save the VM state
> +#
> +# @shutdown: guest is shut down (and -no-shutdown is in use)
> +#
> +# @suspended: guest is suspended (ACPI S3)
> +#
> +# @watchdog: the watchdog action is configured to pause and has been
> triggered
> +#
> +# @guest-panicked: guest has been panicked as a result of guest OS panic
> +#
> +# @colo: guest is paused to save/restore VM state under colo checkpoint,
> +# VM can not get into this state unless colo capability is enabled
> +# for migration. (since 2.8)
> +##
> +{ 'enum': 'RunState',
> + 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
> + 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
> + 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
> + 'guest-panicked', 'colo' ] }
> +
> +##
> +# @StatusInfo:
> +#
> +# Information about VCPU run state
> +#
> +# @running: true if all VCPUs are runnable, false if not runnable
> +#
> +# @singlestep: true if VCPUs are in single-step mode
> +#
> +# @status: the virtual machine @RunState
> +#
> +# Since: 0.14.0
> +#
> +# Notes: @singlestep is enabled through the GDB stub
> +##
> +{ 'struct': 'StatusInfo',
> + 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'}
> }
> +
> +##
> +# @query-status:
> +#
> +# Query the run status of all VCPUs
> +#
> +# Returns: @StatusInfo reflecting all VCPUs
> +#
> +# Since: 0.14.0
> +#
> +# Example:
> +#
> +# -> { "execute": "query-status" }
> +# <- { "return": { "running": true,
> +# "singlestep": false,
> +# "status": "running" } }
> +#
> +##
> +{ 'command': 'query-status', 'returns': 'StatusInfo' }
> +
> +##
> +# @SHUTDOWN:
> +#
> +# Emitted when the virtual machine has shut down, indicating that qemu is
> +# about to exit.
> +#
> +# @guest: If true, the shutdown was triggered by a guest request (such as
> +# a guest-initiated ACPI shutdown request or other hardware-specific
> action)
> +# rather than a host request (such as sending qemu a SIGINT). (since 2.10)
> +#
> +# Note: If the command-line option "-no-shutdown" has been specified,
> qemu will
> +# not exit, and a STOP event will eventually follow the SHUTDOWN event
> +#
> +# Since: 0.12.0
> +#
> +# Example:
> +#
> +# <- { "event": "SHUTDOWN", "data": { "guest": true },
> +# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
> +#
> +##
> +{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool' } }
> +
> +##
> +# @POWERDOWN:
> +#
> +# Emitted when the virtual machine is powered down through the power
> control
> +# system, such as via ACPI.
> +#
> +# Since: 0.12.0
> +#
> +# Example:
> +#
> +# <- { "event": "POWERDOWN",
> +# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
> +#
> +##
> +{ 'event': 'POWERDOWN' }
> +
> +##
> +# @RESET:
> +#
> +# Emitted when the virtual machine is reset
> +#
> +# @guest: If true, the reset was triggered by a guest request (such as
> +# a guest-initiated ACPI reboot request or other hardware-specific action)
> +# rather than a host request (such as the QMP command system_reset).
> +# (since 2.10)
> +#
> +# Since: 0.12.0
> +#
> +# Example:
> +#
> +# <- { "event": "RESET", "data": { "guest": false },
> +# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
> +#
> +##
> +{ 'event': 'RESET', 'data': { 'guest': 'bool' } }
> +
> +##
> +# @STOP:
> +#
> +# Emitted when the virtual machine is stopped
> +#
> +# Since: 0.12.0
> +#
> +# Example:
> +#
> +# <- { "event": "STOP",
> +# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
> +#
> +##
> +{ 'event': 'STOP' }
> +
> +##
> +# @RESUME:
> +#
> +# Emitted when the virtual machine resumes execution
> +#
> +# Since: 0.12.0
> +#
> +# Example:
> +#
> +# <- { "event": "RESUME",
> +# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
> +#
> +##
> +{ 'event': 'RESUME' }
> +
> +##
> +# @SUSPEND:
> +#
> +# Emitted when guest enters a hardware suspension state, for example, S3
> state,
> +# which is sometimes called standby state
> +#
> +# Since: 1.1
> +#
> +# Example:
> +#
> +# <- { "event": "SUSPEND",
> +# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
> +#
> +##
> +{ 'event': 'SUSPEND' }
> +
> +##
> +# @SUSPEND_DISK:
> +#
> +# Emitted when guest enters a hardware suspension state with data saved on
> +# disk, for example, S4 state, which is sometimes called hibernate state
> +#
> +# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this
> state
> +#
> +# Since: 1.2
> +#
> +# Example:
> +#
> +# <- { "event": "SUSPEND_DISK",
> +# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
> +#
> +##
> +{ 'event': 'SUSPEND_DISK' }
> +
> +##
> +# @WAKEUP:
> +#
> +# Emitted when the guest has woken up from suspend state and is running
> +#
> +# Since: 1.1
> +#
> +# Example:
> +#
> +# <- { "event": "WAKEUP",
> +# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
> +#
> +##
> +{ 'event': 'WAKEUP' }
> +
> +##
> +# @WATCHDOG:
> +#
> +# Emitted when the watchdog device's timer is expired
> +#
> +# @action: action that has been taken
> +#
> +# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
> +# followed respectively by the RESET, SHUTDOWN, or STOP events
> +#
> +# Note: This event is rate-limited.
> +#
> +# Since: 0.13.0
> +#
> +# Example:
> +#
> +# <- { "event": "WATCHDOG",
> +# "data": { "action": "reset" },
> +# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
> +#
> +##
> +{ 'event': 'WATCHDOG',
> + 'data': { 'action': 'WatchdogExpirationAction' } }
> +
> +##
> +# @WatchdogExpirationAction:
> +#
> +# An enumeration of the actions taken when the watchdog device's timer is
> +# expired
> +#
> +# @reset: system resets
> +#
> +# @shutdown: system shutdown, note that it is similar to @powerdown, which
> +# tries to set to system status and notify guest
> +#
> +# @poweroff: system poweroff, the emulator program exits
> +#
> +# @pause: system pauses, similar to @stop
> +#
> +# @debug: system enters debug state
> +#
> +# @none: nothing is done
> +#
> +# @inject-nmi: a non-maskable interrupt is injected into the first VCPU
> (all
> +# VCPUS on x86) (since 2.4)
> +#
> +# Since: 2.1
> +##
> +{ 'enum': 'WatchdogExpirationAction',
> + 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none',
> + 'inject-nmi' ] }
> +
> +##
> +# @GUEST_PANICKED:
> +#
> +# Emitted when guest OS panic is detected
> +#
> +# @action: action that has been taken, currently always "pause"
> +#
> +# @info: information about a panic (since 2.9)
> +#
> +# Since: 1.5
> +#
> +# Example:
> +#
> +# <- { "event": "GUEST_PANICKED",
> +# "data": { "action": "pause" } }
> +#
> +##
> +{ 'event': 'GUEST_PANICKED',
> + 'data': { 'action': 'GuestPanicAction', '*info':
> 'GuestPanicInformation' } }
> +
> +##
> +# @GuestPanicAction:
> +#
> +# An enumeration of the actions taken when guest OS panic is detected
> +#
> +# @pause: system pauses
> +#
> +# Since: 2.1 (poweroff since 2.8)
> +##
> +{ 'enum': 'GuestPanicAction',
> + 'data': [ 'pause', 'poweroff' ] }
> +
> +##
> +# @GuestPanicInformationType:
> +#
> +# An enumeration of the guest panic information types
> +#
> +# Since: 2.9
> +##
> +{ 'enum': 'GuestPanicInformationType',
> + 'data': [ 'hyper-v'] }
> +
> +##
> +# @GuestPanicInformation:
> +#
> +# Information about a guest panic
> +#
> +# Since: 2.9
> +##
> +{'union': 'GuestPanicInformation',
> + 'base': {'type': 'GuestPanicInformationType'},
> + 'discriminator': 'type',
> + 'data': { 'hyper-v': 'GuestPanicInformationHyperV' } }
> +
> +##
> +# @GuestPanicInformationHyperV:
> +#
> +# Hyper-V specific guest panic information (HV crash MSRs)
> +#
> +# Since: 2.9
> +##
> +{'struct': 'GuestPanicInformationHyperV',
> + 'data': { 'arg1': 'uint64',
> + 'arg2': 'uint64',
> + 'arg3': 'uint64',
> + 'arg4': 'uint64',
> + 'arg5': 'uint64' } }
> --
> 2.7.5
>
>
> --
Marc-André Lureau
