On Fri, Jul 21, 2017 at 06:37:26PM +0000, Alexandru Avadanii wrote:
> Hi,
> I ran into an interesting limitation (or possibly bug) while trying to attach
> more than 3 (three) virtio-net-pci NICs to an AArch64 guest.
> I created 4 network with virsh (see below for xml defitions) - nothing fancy,
> only 2 of them use NAT.
>
> Attaching a virtio-net-pci NIC for each network works well, VMs can be
> spawned, all devices are properly detected by the guest OS.
> The first 3 guest interfaces work perfectly, however I can't get any traffic
> on the 4th one (in my case the public one).
>
> QEMU version: 2.9.0
> Libvirt: tested with both 1.3.4 and 3.5.0, although I don't think libvirt is
> to blame here
1.3.4 is way too old for AArch64 guests - 3.0.0 was the first release that
contained basic support. The XML below doesn't show what I'd expect for
the PCIe topology either (see [*]), and that's likely the problem. I
suggest you try a fresh VM creation using latest libvirt and virt tools.
If it still doesn't work, then confirm it's not a bridging issue by
checking that it's always the forth network by changing their order.
[*] QEMU doc: docs/config/mach-virt-graphical.cfg
> Host OS: Ubuntu Xenial 16.04.2 LTS
> Guest OS: Ubuntu Xenial Cloud Image (latest available)
> Reproducibility rate: 100% with below config
>
> VM is created with (also domain XML attached at the end of this mail):
> $ virt-install --name cfg01 --ram 4096 --vcpus 6 --cpu host-passthrough
> --accelerate \
> --network network:pxe,model=virtio-net-pci \
> --network network:mgmt,model=virtio-net-pci \
> --network network:internal,model=virtio-net-pci \
> --network network:public,model=virtio-net-pci \
> --console pty --autostart --noreboot --noautoconsole --video=vga
> --noautoconsole [...]
>
> You might notice I had to disable legacy virtio in the domain XML, or the
> guest would complain about a missing F_... property and no guest network
> interfaces would be detected.
You shouldn't need to do this disable-legacy stuff when using PCIe ports,
as the virtio devices will automatically use virtio-1.0 ("modern").
>
> For now, since we only need 4 guest interfaces, we switched one of them back
> to virtio-mmio, and everything is working as expected.
> Unfortunately I can't investigate this myself right now, but I can provide
> additional details if needed for someone else to look into it.
I just checked on my setup (RH qemu based on 2.9, RH libvirt based on
3.2). I used Fedora 26's virt-manager from my x86 notebook, remotely
connecting to my AArch64 host, in order to create four networks and
a guest that has them all attached to four virtio nics. It worked
without a hitch.
Thanks,
drew
>
> BR,
> Alex
>
> ---
> Network definitions:
> ---
> <network>
> <name>pxe</name>
> <forward mode='nat'/>
> <bridge name='pxe' stp='on' delay='0'/>
> <ip address='192.168.10.1' netmask='255.255.255.0'>
> <dhcp>
> <range start='192.168.10.100' end='192.168.10.254'/>
> </dhcp>
> </ip>
> </network>
>
> <network>
> <name>mgmt</name>
> <bridge name='mgmt' stp='on' delay='0'/>
> <ip address='172.16.10.1' netmask='255.255.255.0'>
> </ip>
> </network>
>
> <network>
> <name>internal</name>
> <bridge name='internal' stp='on' delay='0'/>
> </network>
>
> <network>
> <name>public</name>
> <forward mode='nat'/>
> <bridge name='public' stp='on' delay='0'/>
> <ip address='10.16.0.1' netmask='255.255.255.0'>
> </ip>
> </network>
>
> ---
> Domain XML:
> ---
> <domain type='kvm' id='28'
> xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
> <name>cfg01</name>
> <uuid>3f8415d1-963a-46aa-8a63-1c6558775b92</uuid>
> <memory unit='KiB'>4194304</memory>
> <currentMemory unit='KiB'>4194304</currentMemory>
> <vcpu placement='static'>6</vcpu>
> <resource>
> <partition>/machine</partition>
> </resource>
> <os>
> <type arch='aarch64' machine='virt-2.9'>hvm</type>
> <loader readonly='yes'
> type='pflash'>/usr/share/AAVMF/AAVMF_CODE.fd</loader>
> <nvram>/var/lib/libvirt/qemu/nvram/cfg01_VARS.fd</nvram>
> <boot dev='hd'/>
> </os>
> <features>
> <acpi/>
> <gic version='3'/>
> </features>
> <cpu mode='host-passthrough' check='none'/>
> <clock offset='utc'/>
> <on_poweroff>destroy</on_poweroff>
> <on_reboot>restart</on_reboot>
> <on_crash>restart</on_crash>
> <devices>
> <emulator>/usr/bin/kvm</emulator>
> <disk type='file' device='disk'>
> <driver name='qemu' type='qcow2' cache='none' io='native'/>
> <source
> file='/home/jenkins/alav/armband/upstream/fuel/mcp/scripts/images/mcp_cfg01.qcow2'/>
> <backingStore/>
> <target dev='vda' bus='virtio'/>
> <alias name='virtio-disk0'/>
> <address type='pci' domain='0x0000' bus='0x04' slot='0x00'
> function='0x0'/>
> </disk>
> <disk type='file' device='cdrom'>
> <driver name='qemu' type='raw'/>
> <source
> file='/home/jenkins/alav/armband/upstream/fuel/mcp/scripts/images/mcp_cfg01.iso'/>
> <backingStore/>
> <target dev='sda' bus='scsi'/>
> <readonly/>
> <alias name='scsi0-0-0-0'/>
> <address type='drive' controller='0' bus='0' target='0' unit='0'/>
> </disk>
> <controller type='scsi' index='0' model='virtio-scsi'>
> <alias name='scsi0'/>
> <address type='pci' domain='0x0000' bus='0x03' slot='0x00'
> function='0x0'/>
> </controller>
> <controller type='pci' index='0' model='pcie-root'>
> <alias name='pcie.0'/>
> </controller>
> <controller type='pci' index='1' model='dmi-to-pci-bridge'>
> <model name='i82801b11-bridge'/>
> <alias name='pci.1'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x01'
> function='0x0'/>
> </controller>
> <controller type='pci' index='2' model='pci-bridge'>
> <model name='pci-bridge'/>
> <target chassisNr='2'/>
> <alias name='pci.2'/>
> <address type='pci' domain='0x0000' bus='0x01' slot='0x00'
> function='0x0'/>
> </controller>
> <controller type='pci' index='3' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='3' port='0x10'/>
> <alias name='pci.3'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x0' multifunction='on'/>
> </controller>
> <controller type='pci' index='4' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='4' port='0x11'/>
> <alias name='pci.4'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x1'/>
> </controller>
> <controller type='pci' index='5' model='pcie-root-port'>
> <model name='pcie-root-port'/>
> <target chassis='5' port='0x12'/>
> <alias name='pci.5'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
> function='0x2'/>
> </controller>
> <interface type='network'>
> <mac address='52:54:00:ae:48:81'/>
> <source network='pxe' bridge='pxe'/>
> <target dev='vnet0'/>
> <model type='virtio-net-pci'/>
> <alias name='net0'/>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x01'
> function='0x0'/>
> </interface>
> <interface type='network'>
> <mac address='52:54:00:36:2c:a9'/>
> <source network='mgmt' bridge='mgmt'/>
> <target dev='vnet1'/>
> <model type='virtio-net-pci'/>
> <alias name='net1'/>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x02'
> function='0x0'/>
> </interface>
> <interface type='network'>
> <mac address='52:54:00:43:ce:03'/>
> <source network='internal' bridge='internal'/>
> <target dev='vnet2'/>
> <model type='virtio-net-pci'/>
> <alias name='net2'/>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x03'
> function='0x0'/>
> </interface>
> <interface type='network'>
> <mac address='52:54:00:37:e6:0e'/>
> <source network='public' bridge='public'/>
> <target dev='vnet3'/>
> <model type='virtio-net-pci'/>
> <alias name='net3'/>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x04'
> function='0x0'/>
> </interface>
> <serial type='pty'>
> <source path='/dev/pts/0'/>
> <target port='0'/>
> <alias name='serial0'/>
> </serial>
> <console type='pty' tty='/dev/pts/0'>
> <source path='/dev/pts/0'/>
> <target type='serial' port='0'/>
> <alias name='serial0'/>
> </console>
> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'>
> <listen type='address' address='127.0.0.1'/>
> </graphics>
> <video>
> <model type='vga' vram='16384' heads='1' primary='yes'/>
> <alias name='video0'/>
> <address type='pci' domain='0x0000' bus='0x02' slot='0x05'
> function='0x0'/>
> </video>
> </devices>
> <seclabel type='dynamic' model='apparmor' relabel='yes'>
> <label>libvirt-3f8415d1-963a-46aa-8a63-1c6558775b92</label>
> <imagelabel>libvirt-3f8415d1-963a-46aa-8a63-1c6558775b92</imagelabel>
> </seclabel>
> <seclabel type='dynamic' model='dac' relabel='yes'>
> <label>+113:+115</label>
> <imagelabel>+113:+115</imagelabel>
> </seclabel>
> <qemu:commandline>
> <qemu:arg value='-global'/>
> <qemu:arg value='virtio-pci.disable-legacy=on'/>
> </qemu:commandline>
> </domain>
>
