This patch fixes 5beb8ad503c88a76f2b8106c3b74b4ce485a60e1
which broke hotplug removal of cold plugged devices:
- pass addition/removal state to hotplug callbacks
- use that in piix and pcie
This also fixes an assert on hotplug removal of coldplugged
express devices.
Reported-by: by Cam Macdonell <c...@cs.ualberta.ca>.
Signed-off-by: Isaku Yamahata <yamah...@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <m...@redhat.com>
---
So I think the below would be the cleanest way
to fix the bug as we keep the hot/cold plug logic
in a central palce. Untested. Comments? Cam?
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index 66c7885..f549089 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -585,7 +585,8 @@ static void pciej_write(void *opaque, uint32_t addr,
uint32_t val)
PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
}
-static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
+static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
+ PCIHotplugState state);
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
@@ -615,18 +616,23 @@ static void disable_device(PIIX4PMState *s, int slot)
s->pci0_status.down |= (1 << slot);
}
-static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
+static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
+ PCIHotplugState state)
{
int slot = PCI_SLOT(dev->devfn);
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
DO_UPCAST(PCIDevice, qdev, qdev));
- if (!dev->qdev.hotplugged)
+ /* Don't send event when device is enabled during qemu machine creation:
+ * it is present on boot, no hotplug event is necessary. We do send an
+ * event when the device is disabled later. */
+ if (state == PCI_COLDPLUG_ENABLED) {
return 0;
+ }
s->pci0_status.up = 0;
s->pci0_status.down = 0;
- if (state) {
+ if (state == PCI_HOTPLUG_ENABLED) {
enable_device(s, slot);
} else {
disable_device(s, slot);
diff --git a/hw/pci.c b/hw/pci.c
index 30e1603..316b24f 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -1566,8 +1566,11 @@ static int pci_qdev_init(DeviceState *qdev, DeviceInfo
*base)
pci_add_option_rom(pci_dev);
if (bus->hotplug) {
- /* lower layer must check qdev->hotplugged */
- rc = bus->hotplug(bus->hotplug_qdev, pci_dev, 1);
+ /* Let buses differentiate between hotplug and when device is
+ * enabled during qemu machine creation. */
+ rc = bus->hotplug(bus->hotplug_qdev, pci_dev,
+ qdev->hotplugged ? PCI_HOTPLUG_ENABLED:
+ PCI_COLDPLUG_ENABLED);
if (rc != 0) {
int r = pci_unregister_device(&pci_dev->qdev);
assert(!r);
@@ -1581,7 +1584,8 @@ static int pci_unplug_device(DeviceState *qdev)
{
PCIDevice *dev = DO_UPCAST(PCIDevice, qdev, qdev);
- return dev->bus->hotplug(dev->bus->hotplug_qdev, dev, 0);
+ return dev->bus->hotplug(dev->bus->hotplug_qdev, dev,
+ PCI_HOTPLUG_DISABLED);
}
void pci_qdev_register(PCIDeviceInfo *info)
diff --git a/hw/pci.h b/hw/pci.h
index 7100804..09b3e4c 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -214,7 +214,15 @@ int pci_device_load(PCIDevice *s, QEMUFile *f);
typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);
typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
-typedef int (*pci_hotplug_fn)(DeviceState *qdev, PCIDevice *pci_dev, int
state);
+
+typedef enum {
+ PCI_HOTPLUG_DISABLED,
+ PCI_HOTPLUG_ENABLED,
+ PCI_COLDPLUG_ENABLED,
+} PCIHotplugState;
+
+typedef int (*pci_hotplug_fn)(DeviceState *qdev, PCIDevice *pci_dev,
+ PCIHotplugState state);
void pci_bus_new_inplace(PCIBus *bus, DeviceState *parent,
const char *name, int devfn_min);
PCIBus *pci_bus_new(DeviceState *parent, const char *name, int devfn_min);
diff --git a/hw/pcie.c b/hw/pcie.c
index 35918f7..4df48b8 100644
--- a/hw/pcie.c
+++ b/hw/pcie.c
@@ -192,14 +192,16 @@ static void pcie_cap_slot_event(PCIDevice *dev,
PCIExpressHotPlugEvent event)
}
static int pcie_cap_slot_hotplug(DeviceState *qdev,
- PCIDevice *pci_dev, int state)
+ PCIDevice *pci_dev, PCIHotplugState state)
{
PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
uint8_t *exp_cap = d->config + d->exp.exp_cap;
uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
- if (!pci_dev->qdev.hotplugged) {
- assert(state); /* this case only happens at machine creation. */
+ /* Don't send event when device is enabled during qemu machine creation:
+ * it is present on boot, no hotplug event is necessary. We do send an
+ * event when the device is disabled later. */
+ if (state == PCI_COLDPLUG_ENABLED) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
return 0;
