The default value of base/limit registers aren't specified in the spec.
So pci_bridge_reset() shouldn't touch them.
Instead, introduced two functions to reset those registers in a way
of typical implementation. zero base/limit registers or disable forwarding.
They will be used later.
Signed-off-by: Isaku Yamahata <yamah...@valinux.co.jp>
---
Changes v5 -> v6:
- pci_bridge_disable_base_limit()
Changes v4 -> v5:
- drop the lines in pci_bridge_reset()
- introduced two functions to reset base/limit registers.
---
hw/pci_bridge.c | 48 ++++++++++++++++++++++++++++++++++++++++++------
hw/pci_bridge.h | 1 +
2 files changed, 43 insertions(+), 6 deletions(-)
diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c
index 638e3b3..7e8488a 100644
--- a/hw/pci_bridge.c
+++ b/hw/pci_bridge.c
@@ -151,6 +151,26 @@ void pci_bridge_write_config(PCIDevice *d,
}
}
+void pci_bridge_disable_base_limit(PCIDevice *dev)
+{
+ uint8_t *conf = dev->config;
+
+ pci_byte_test_and_set_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_set_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_set_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+}
+
/* reset bridge specific configuration registers */
void pci_bridge_reset_reg(PCIDevice *dev)
{
@@ -161,12 +181,28 @@ void pci_bridge_reset_reg(PCIDevice *dev)
conf[PCI_SUBORDINATE_BUS] = 0;
conf[PCI_SEC_LATENCY_TIMER] = 0;
- conf[PCI_IO_BASE] = 0;
- conf[PCI_IO_LIMIT] = 0;
- pci_set_word(conf + PCI_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_MEMORY_LIMIT, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0);
+ /*
+ * the default values for base/limit registers aren't specified
+ * in the PCI-to-PCI-bridge spec. So we don't thouch them here.
+ * Each implementation can override it.
+ * typical implementation does
+ * zero base/limit registers or
+ * disable forwarding: pci_bridge_disable_base_limit()
+ * If disable forwarding is wanted, call pci_bridge_disable_base_limit()
+ * after this function.
+ */
+ pci_byte_test_and_clear_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
diff --git a/hw/pci_bridge.h b/hw/pci_bridge.h
index f6fade0..84411a6 100644
--- a/hw/pci_bridge.h
+++ b/hw/pci_bridge.h
@@ -39,6 +39,7 @@ pcibus_t pci_bridge_get_limit(const PCIDevice *bridge,
uint8_t type);
void pci_bridge_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len);
+void pci_bridge_disable_base_limit(PCIDevice *dev);
void pci_bridge_reset_reg(PCIDevice *dev);
void pci_bridge_reset(DeviceState *qdev);
--
1.7.1.1
