On 17 February 2017 at 06:31, <vijay.kil...@gmail.com> wrote:
> From: Vijaya Kumar K <vijaya.ku...@cavium.com>
>
> To Save and Restore ICC_SRE_EL1 register introduce vmstate
> subsection and load only if non-zero.
> Also initialize icc_sre_el1 with to 0x7 in pre_load
> function.
>
> Signed-off-by: Vijaya Kumar K <vijaya.ku...@cavium.com>
> ---
> hw/intc/arm_gicv3_common.c | 32 ++++++++++++++++++++++++++++++++
> include/hw/intc/arm_gicv3_common.h | 1 +
> 2 files changed, 33 insertions(+)
>
> diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
> index 16b9b0f..e62480e 100644
> --- a/hw/intc/arm_gicv3_common.c
> +++ b/hw/intc/arm_gicv3_common.c
> @@ -70,6 +70,34 @@ static const VMStateDescription vmstate_gicv3_cpu_virt = {
> }
> };
>
> +static int icc_sre_el1_reg_pre_load(void *opaque)
> +{
> + GICv3CPUState *cs = opaque;
> +
> + /* By default enable SRE and disable IRQ & FIQ bypass. */
> + cs->icc_sre_el1 = 0x7;
Why do we need the pre_load function? I would have
expected that reset would have given us these defaults
already.
> + return 0;
> +}
> +
> +static bool icc_sre_el1_reg_needed(void *opaque)
> +{
> + GICv3CPUState *cs = opaque;
> +
> + return cs->icc_sre_el1 != 0;
I expected this to say "we need to transfer the value if
it isn't 0x7" (since the current situation of migration
is "we assume that the value is 0x7").
Something should probably fail inbound migration for TCG
if the value isn't 0x7, for that matter.
Is there a situation where KVM might allow a value other
than 0x7?
> +}
> +
> +const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
> + .name = "arm_gicv3_cpu/sre_el1",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .pre_load = icc_sre_el1_reg_pre_load,
> + .needed = icc_sre_el1_reg_needed,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT64(icc_sre_el1, GICv3CPUState),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> static const VMStateDescription vmstate_gicv3_cpu = {
> .name = "arm_gicv3_cpu",
> .version_id = 1,
> @@ -100,6 +128,10 @@ static const VMStateDescription vmstate_gicv3_cpu = {
> .subsections = (const VMStateDescription * []) {
> &vmstate_gicv3_cpu_virt,
> NULL
> + },
> + .subsections = (const VMStateDescription * []) {
> + &vmstate_gicv3_cpu_sre_el1,
> + NULL
> }
> };
>
> diff --git a/include/hw/intc/arm_gicv3_common.h
> b/include/hw/intc/arm_gicv3_common.h
> index 4156051..bccdfe1 100644
> --- a/include/hw/intc/arm_gicv3_common.h
> +++ b/include/hw/intc/arm_gicv3_common.h
> @@ -172,6 +172,7 @@ struct GICv3CPUState {
> uint8_t gicr_ipriorityr[GIC_INTERNAL];
>
> /* CPU interface */
> + uint64_t icc_sre_el1;
> uint64_t icc_ctlr_el1[2];
> uint64_t icc_pmr_el1;
> uint64_t icc_bpr[3];
> --
> 1.9.1
thanks
-- PMM
