Hello list,
I am trying to write to an usb image file using OpenBSD 4.7 as guest and
a fresh "QEMU emulator version 0.12.90". While trying to access the
device I got the following error messages:
~~~~~~~~snip~~~~~~~~~~~
umass0 at uhub0 port 1 configuration 1 interface 0 "QEMU 0.12.90 QEMU
USB HARDDRIVE" rev 1.00/0.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <QEMU, QEMU HARDDISK, 0.12> SCSI3 0/direct
fixed
sd0: 1024MB, 512 bytes/sec, 2097152 sec total
umass0: Invalid CSW: sig 0x00000000 should be 0x53425355
umass0: Invalid CSW: sig 0x00000000 should be 0x53425355
# newfs /dev/rsd0a
/dev/rsd0a: 1024.0MB in 2097088 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
super-block backups (for fsck -b #) at:
umass0: Invalid CSW: sig 0x00000000 should be 0x53425355
newfs: wtfs: write error on block 192: Input/output error
# disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: QEMU HARDDISK
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 130
total sectors: 2097152
rpm: 3600
interleave: 1
boundstart: 0
boundend: 2097152
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 2097089 63 4.2BSD 2048 16384 1
c: 2097152 0 unused
#
~~~~~~~~~~~snip~~~~~~~~~~~~
Using some hardware USB-Stick (plugged into the host and forward it to
the guest) works fine.
Anyone have a clue about it? Please cc me in your replies because I am
not subscribed to the list.
Cheers,
Sebastian
