On 01/09/2016 15:17, Denis Dmitriev wrote:
>
> I think that I am missing some initialization or something like that.
> To work with the registers I create a memory region, and associate it
> with the read and write handlers (as an example I used lsi53c895a.c).
> Maybe work with memory in which mailboxes are located must be built
> the same way?
No, it doesn't.
> To me, it looks like I'm trying to get the data to the right place but
> I do not see them because there is something wrong with the mapping.
> The basis of the initialization function I took from lsi53c895a.c.
> Perhaps the root of evil in those lines, I commented out? If so, how
> can I understand what parameters should be passed in
> memory_region_init_io pci_register_bar and functions?
>
> void buslogic_scsi_realize(PCIDevice *dev, Error **errp)
> {
> BuslogicState *s = BUSLOGIC_BT958(dev);
> DeviceState *d = DEVICE(dev);
> uint8_t *pci_conf;
>
> pci_conf = dev->config;
>
> /* PCI latency timer = 255 */
> pci_conf[PCI_LATENCY_TIMER] = 0xff;
> /* Interrupt pin A */
> pci_conf[PCI_INTERRUPT_PIN] = 0x01;
>
>
>
> memory_region_init_io(&s->port_io, OBJECT(s), &bl_port_ops, s,
> "BusLogic", 0x4);
If the BT958 has a single BAR, that would be fine. But is the length
(0x4) correct?
Paolo
> // memory_region_init_io(&s->ram_io, OBJECT(s), &bl_ram_ops, s,
> // "BusLogic-ram", 0x2000);
> // memory_region_init_io(&s->io_io, OBJECT(s), &bl_io_ops, s,
> // "BusLogic-io", 256);
>
> pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->port_io);
> // pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io);
> // pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io);
>
> QTAILQ_INIT(&s->queue);
>
> scsi_bus_new(&s->bus, sizeof(s->bus), d, &bl_scsi_info, NULL);
> if (!d->hotplugged) {
> scsi_bus_legacy_handle_cmdline(&s->bus, errp);
> }
