This series converts devices used by MIPS Magnum emulation to qdev devices.
Once applied, Magnum emulation will be fully creatable by a
configuration file (see attached file)
usage:
qemu-system-mips64el -M empty -nodefaults -readconfig magnum
-netdev id=nic,type=user
-drive id=disk,format=qcow2,if=none,file=1G.qcow2
-drive id=cdrom,media=cdrom,format=raw,if=none,file=arccd.iso
-chardev id=serial0,backend=vc
-chardev id=serial1,backend=vc
-chardev id=parallel0,backend=vc
All feedback is very appreciated.
Regards,
Hervé
# MIPS Magnum definition for QEMU
[device]
driver = "mips-board"
romfile = "/mnt/C/NTPROM.bin"
ramsize = "64"
[device]
driver = "cpu-mips"
model = "R4000"
[device]
driver = "rc4030"
[device]
driver = "isabus"
iobase = "0x90000000"
size = "0x1000000"
[device]
driver = "mc146818rtc"
base_year = "1980"
[device]
driver = "rc4030-g364fb"
iobase = "0x60000000"
vram = "0x40000000"
vram_size = "0x800000"
irq = "3"
[device]
driver = "rc4030-dp83932"
iobase = "0x80001000"
irq = "4"
mac = "52:54:00:12:34:56"
netdev = "nic"
[device]
driver = "rc4030-esp"
iobase = "0x80002000"
irq = "5"
dma = "0"
[device]
driver = "scsi-disk"
drive = "disk"
scsi-id = "0"
[device]
driver = "scsi-disk"
drive = "cdrom"
scsi-id = "4"
[device]
driver = "rc4030-fdc"
iobase = "0x80003000"
irq = "1"
dma = "0"
[device]
driver = "rtc-forward"
iobase = "0x80004000"
size = "0x1000"
[device]
driver = "rc4030-i8042"
iobase = "0x80005000"
size = "0x1000"
mask = "0x1"
irq_kbd = "6"
irq_aux = "7"
[device]
driver = "rc4030-serial"
chardev = "serial0"
iobase = "0x80006000"
irq = "8"
[device]
driver = "rc4030-serial"
chardev = "serial1"
iobase = "0x80007000"
irq = "9"
[device]
driver = "rc4030-parallel"
chardev = "parallel0"
iobase = "0x80008000"
irq = "0"
[device]
driver = "ds1225y"
iobase = "0x80009000"
size = "0x2000"
filename = "nvram"
[device]
driver = "jazz-led"
iobase = "0x8000f000"
size = "0x1000"
