Hi t, just to notice the 2.7 is effected too :-( ./qemu-system-i386 qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 This usually means one of the following happened:
(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end (3) Your guest kernel has a bug and crashed by jumping off into nowhere This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. Execution cannot continue; stopping here. amigaone@Amigaone:~/src/pippo/qemu/i386-softmmu$ ./qemu-system-i386 -m 1024 qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 This usually means one of the following happened: (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end (3) Your guest kernel has a bug and crashed by jumping off into nowhere This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. Execution cannot continue; stopping here. amigaone@Amigaone:~/src/pippo/qemu/i386-softmmu$ ./qemu-system-i386 --version QEMU emulator version 2.6.90 (v2.7.0-rc0-10-gf49ee63-dirty), Copyright (c) 2003-2008 Fabrice Bellard -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1603636 Title: Guest has not initialized the display yet on ubuntu 16.10 PPC Status in QEMU: New Bug description: Hi tested with all kind of configure, with all kind of machine types but i have the same issue ... on lastest quemo 2.6 "Guest has not initialized the display yet" note with lastest git repository the situation become worst because on i386-softmmu i have the message but qemu exit alone because looklike there is not a bios this is gdb of i386-softmmu (gdb) run Starting program: /home/amigaone/src/qemu/i386-softmmu/qemu-system-i386 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/powerpc-linux-gnu/libthread_db.so.1". [New Thread 0xf7f78b70 (LWP 25074)] [New Thread 0xf770bb70 (LWP 25075)] [New Thread 0xf6dfdb70 (LWP 25076)] [New Thread 0xf65fdb70 (LWP 25077)] [New Thread 0xf3337b70 (LWP 25078)] [New Thread 0xe4146b70 (LWP 25087)] qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 This usually means one of the following happened: (1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) (2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end (3) Your guest kernel has a bug and crashed by jumping off into nowhere This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. Execution cannot continue; stopping here. [Thread 0xe4146b70 (LWP 25087) exited] [Thread 0xf65fdb70 (LWP 25077) exited] [Thread 0xf6dfdb70 (LWP 25076) exited] [Thread 0xf770bb70 (LWP 25075) exited] [Thread 0xf7f78b70 (LWP 25074) exited] [Thread 0xf7f7c000 (LWP 25070) exited] [Inferior 1 (process 25070) exited with code 01] this is my ldd ldd ./qemu-system-i386 linux-vdso32.so.1 => (0x00100000) libvirglrenderer.so.0 => /usr/local/lib/libvirglrenderer.so.0 (0x0ff8a000) libepoxy.so.0 => /usr/lib/powerpc-linux-gnu/libepoxy.so.0 (0x0fe86000) libgbm.so.1 => /usr/local/lib/libgbm.so.1 (0x0fe55000) libX11.so.6 => /usr/lib/powerpc-linux-gnu/libX11.so.6 (0x0fcf2000) libz.so.1 => /lib/powerpc-linux-gnu/libz.so.1 (0x0fcb1000) libcurl-gnutls.so.4 => /usr/lib/powerpc-linux-gnu/libcurl-gnutls.so.4 (0x0fc10000) libssh2.so.1 => /usr/lib/powerpc-linux-gnu/libssh2.so.1 (0x0fbbf000) libbz2.so.1.0 => /lib/powerpc-linux-gnu/libbz2.so.1.0 (0x0fb7e000) libpixman-1.so.0 => /usr/lib/powerpc-linux-gnu/libpixman-1.so.0 (0x0fadd000) libutil.so.1 => /lib/powerpc-linux-gnu/libutil.so.1 (0x0faac000) libnuma.so.1 => /usr/lib/powerpc-linux-gnu/libnuma.so.1 (0x0fa79000) libncurses.so.5 => /lib/powerpc-linux-gnu/libncurses.so.5 (0x0fa28000) libtinfo.so.5 => /lib/powerpc-linux-gnu/libtinfo.so.5 (0x0f9d7000) libuuid.so.1 => /lib/powerpc-linux-gnu/libuuid.so.1 (0x0f9a6000) libpng16.so.16 => /usr/lib/powerpc-linux-gnu/libpng16.so.16 (0x0f945000) libjpeg.so.8 => /usr/lib/powerpc-linux-gnu/libjpeg.so.8 (0x0f8d4000) libSDL2-2.0.so.0 => /usr/local/lib/libSDL2-2.0.so.0 (0x0f77d000) libnettle.so.6 => /usr/lib/powerpc-linux-gnu/libnettle.so.6 (0x0f71c000) libgnutls.so.30 => /usr/lib/powerpc-linux-gnu/libgnutls.so.30 (0x0f5ca000) libgtk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgtk-x11-2.0.so.0 (0x0f0e6000) libgdk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk-x11-2.0.so.0 (0x0f005000) libcairo.so.2 => /usr/lib/powerpc-linux-gnu/libcairo.so.2 (0x0eec3000) libgdk_pixbuf-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk_pixbuf-2.0.so.0 (0x0ee72000) libgobject-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgobject-2.0.so.0 (0x0edf1000) libglib-2.0.so.0 => /lib/powerpc-linux-gnu/libglib-2.0.so.0 (0x0eca0000) libsnappy.so.1 => /usr/lib/powerpc-linux-gnu/libsnappy.so.1 (0x0ec6f000) libusb-1.0.so.0 => /lib/powerpc-linux-gnu/libusb-1.0.so.0 (0x0ec2e000) librt.so.1 => /lib/powerpc-linux-gnu/librt.so.1 (0x0ebfd000) libm.so.6 => /lib/powerpc-linux-gnu/libm.so.6 (0x0eb0c000) libgcc_s.so.1 => /lib/powerpc-linux-gnu/libgcc_s.so.1 (0x0eacb000) libpthread.so.0 => /lib/powerpc-linux-gnu/libpthread.so.0 (0x0ea88000) libc.so.6 => /lib/powerpc-linux-gnu/libc.so.6 (0x0e8d4000) libdrm.so.2 => /usr/lib/powerpc-linux-gnu/libdrm.so.2 (0x0e8a3000) libdl.so.2 => /lib/powerpc-linux-gnu/libdl.so.2 (0x0e872000) libexpat.so.1 => /lib/powerpc-linux-gnu/libexpat.so.1 (0x0e821000) libxcb.so.1 => /usr/lib/powerpc-linux-gnu/libxcb.so.1 (0x0e7e0000) libidn.so.11 => /lib/powerpc-linux-gnu/libidn.so.11 (0x0e77f000) librtmp.so.1 => /usr/lib/powerpc-linux-gnu/librtmp.so.1 (0x0e73e000) libgssapi_krb5.so.2 => /usr/lib/powerpc-linux-gnu/libgssapi_krb5.so.2 (0x0e6cd000) liblber-2.4.so.2 => /usr/lib/powerpc-linux-gnu/liblber-2.4.so.2 (0x0e69c000) libldap_r-2.4.so.2 => /usr/lib/powerpc-linux-gnu/libldap_r-2.4.so.2 (0x0e61a000) libgcrypt.so.20 => /lib/powerpc-linux-gnu/libgcrypt.so.20 (0x0e527000) /lib/ld.so.1 (0x200a9000) libsndio.so.6.1 => /usr/lib/powerpc-linux-gnu/libsndio.so.6.1 (0x0e4f4000) libp11-kit.so.0 => /usr/lib/powerpc-linux-gnu/libp11-kit.so.0 (0x0e473000) libtasn1.so.6 => /usr/lib/powerpc-linux-gnu/libtasn1.so.6 (0x0e432000) libhogweed.so.4 => /usr/lib/powerpc-linux-gnu/libhogweed.so.4 (0x0e3d1000) libgmp.so.10 => /usr/lib/powerpc-linux-gnu/libgmp.so.10 (0x0e330000) libgmodule-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgmodule-2.0.so.0 (0x0e2ff000) libpangocairo-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangocairo-1.0.so.0 (0x0e2ce000) libXfixes.so.3 => /usr/lib/powerpc-linux-gnu/libXfixes.so.3 (0x0e29d000) libatk-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libatk-1.0.so.0 (0x0e24c000) libgio-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgio-2.0.so.0 (0x0e05a000) libpangoft2-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangoft2-1.0.so.0 (0x0e019000) libpango-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpango-1.0.so.0 (0x0dfa8000) libfontconfig.so.1 => /usr/lib/powerpc-linux-gnu/libfontconfig.so.1 (0x0df33000) libXrender.so.1 => /usr/lib/powerpc-linux-gnu/libXrender.so.1 (0x0df02000) libXinerama.so.1 => /usr/lib/powerpc-linux-gnu/libXinerama.so.1 (0x0dedf000) libXi.so.6 => /usr/lib/powerpc-linux-gnu/libXi.so.6 (0x0de9e000) libXrandr.so.2 => /usr/lib/powerpc-linux-gnu/libXrandr.so.2 (0x0de6d000) libXcursor.so.1 => /usr/lib/powerpc-linux-gnu/libXcursor.so.1 (0x0de42000) libXcomposite.so.1 => /usr/lib/powerpc-linux-gnu/libXcomposite.so.1 (0x0de1f000) libXdamage.so.1 => /usr/lib/powerpc-linux-gnu/libXdamage.so.1 (0x0ddfc000) libXext.so.6 => /usr/lib/powerpc-linux-gnu/libXext.so.6 (0x0ddc8000) libfreetype.so.6 => /usr/lib/powerpc-linux-gnu/libfreetype.so.6 (0x0dcf7000) libxcb-shm.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-shm.so.0 (0x0dcc6000) libxcb-render.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-render.so.0 (0x0dc95000) libffi.so.6 => /usr/lib/powerpc-linux-gnu/libffi.so.6 (0x0dc64000) libpcre.so.3 => /lib/powerpc-linux-gnu/libpcre.so.3 (0x0dbd3000) libstdc++.so.6 => /usr/lib/powerpc-linux-gnu/libstdc++.so.6 (0x0d9df000) libudev.so.1 => /lib/powerpc-linux-gnu/libudev.so.1 (0x0d99d000) libXau.so.6 => /usr/lib/powerpc-linux-gnu/libXau.so.6 (0x0d979000) libXdmcp.so.6 => /usr/lib/powerpc-linux-gnu/libXdmcp.so.6 (0x0d948000) libkrb5.so.3 => /usr/lib/powerpc-linux-gnu/libkrb5.so.3 (0x0d857000) libk5crypto.so.3 => /usr/lib/powerpc-linux-gnu/libk5crypto.so.3 (0x0d806000) libcom_err.so.2 => /lib/powerpc-linux-gnu/libcom_err.so.2 (0x0d7d5000) libkrb5support.so.0 => /usr/lib/powerpc-linux-gnu/libkrb5support.so.0 (0x0d7a4000) libresolv.so.2 => /lib/powerpc-linux-gnu/libresolv.so.2 (0x0d761000) libsasl2.so.2 => /usr/lib/powerpc-linux-gnu/libsasl2.so.2 (0x0d720000) libgssapi.so.3 => /usr/lib/powerpc-linux-gnu/libgssapi.so.3 (0x0d6be000) libgpg-error.so.0 => /lib/powerpc-linux-gnu/libgpg-error.so.0 (0x0d67d000) libasound.so.2 => /usr/lib/powerpc-linux-gnu/libasound.so.2 (0x0d54c000) libbsd.so.0 => /lib/powerpc-linux-gnu/libbsd.so.0 (0x0d50b000) libselinux.so.1 => /lib/powerpc-linux-gnu/libselinux.so.1 (0x0d4b9000) libharfbuzz.so.0 => /usr/lib/powerpc-linux-gnu/libharfbuzz.so.0 (0x0d408000) libthai.so.0 => /usr/lib/powerpc-linux-gnu/libthai.so.0 (0x0d3d7000) libkeyutils.so.1 => /lib/powerpc-linux-gnu/libkeyutils.so.1 (0x0d3a6000) libheimntlm.so.0 => /usr/lib/powerpc-linux-gnu/libheimntlm.so.0 (0x0d375000) libkrb5.so.26 => /usr/lib/powerpc-linux-gnu/libkrb5.so.26 (0x0d2c3000) libasn1.so.8 => /usr/lib/powerpc-linux-gnu/libasn1.so.8 (0x0d201000) libhcrypto.so.4 => /usr/lib/powerpc-linux-gnu/libhcrypto.so.4 (0x0d19f000) libroken.so.18 => /usr/lib/powerpc-linux-gnu/libroken.so.18 (0x0d15e000) libgraphite2.so.3 => /usr/lib/powerpc-linux-gnu/libgraphite2.so.3 (0x0d10d000) libdatrie.so.1 => /usr/lib/powerpc-linux-gnu/libdatrie.so.1 (0x0d0dc000) libwind.so.0 => /usr/lib/powerpc-linux-gnu/libwind.so.0 (0x0d08b000) libheimbase.so.1 => /usr/lib/powerpc-linux-gnu/libheimbase.so.1 (0x0d05a000) libhx509.so.5 => /usr/lib/powerpc-linux-gnu/libhx509.so.5 (0x0cfe8000) libsqlite3.so.0 => /usr/lib/powerpc-linux-gnu/libsqlite3.so.0 (0x0ceb6000) libcrypt.so.1 => /lib/powerpc-linux-gnu/libcrypt.so.1 (0x0ce5e000) Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1603636/+subscriptions
