It's an AMD FX(tm)-8150 with a GA-990FXA-UD5 board bios version F11. I
also tested without the usb controllers, such as with your suggested
commands. And again below.
root@peter:~ # uname -a
Linux peter 4.6.2-1-MANJARO #1 SMP PREEMPT Wed Jun 8 11:00:08 UTC 2016 x86_64
GNU/Linux
root@peter:~ # cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.6-x86_64
root=UUID=dc395127-6336-448f-a950-137c100420c9 rw pcie_acs_override=downstream
apparmor=1 security=apparmor
vfio-pci.pci-ids=00:13.0,00:13.2,00:14.2,00:16.0,00:16.2,01:00.1,04:00.0,04:00.1,05:00.0,05:00.1
the vfio-pci.pci-ids=... is for a mkinitcpio hook I wrote that binds
vfio-pci early so X has no chance to touch the GPUs and risk hanging the
system; it runs before the radeon driver is loaded; it does 3 steps:
unbind on each listed, then vfio-pci bind which annoyingly takes non-
unique device:vendor rather than pci address, then unbind anything not
listed to solve the non-unique problem (relevant since the host also has
the same GPU device:vendor id, and usb controllers)
and you can ignore the apparmor stuff since this stock kernel has no
apparmor support
Testing with my full command or your command, with minimal changes (pci id,
path to romfile, my disk is lvm rather than file)
...
instead of a black screen/manjaro logo, I get a screen more like the first
photo with colored pixel mess.
And a new error (that plus the non-black screen are possibly because I
waited longer rather than changing the test):
root@peter:~/kvm # qemu-system-x86_64 -enable-kvm -M q35 -m 4G -cpu host
-smp 8 \
> -vga none -device
ioh3420,bus=pcie.0,addr=1c.0,port=1,chassis=1,id=root.1 \
> -device
vfio-pci,host=05:00.0,bus=root.1,x-vga=on,addr=0.0,romfile=/mnt/archive/software/vgarom/Sapphire.HD6770.1024/Sapphire.HD6770.1024.120105.rom
\
> -device ahci,bus=pcie.0,id=ahci \
> -drive
file=/dev/data/qemutest2,id=iso,index=0,media=disk,format=raw \
> -net none -nographic -monitor stdio -serial none -parallel
none
QEMU 2.6.0 monitor - type 'help' for more information
(qemu) KVM internal error. Suberror: 1
emulation failure
EAX=b0000000 EBX=00000000 ECX=000f80f2 EDX=7f729950
ESI=005a3c00 EDI=7feb82e0 EBP=0007fe1c ESP=0007fe14
EIP=0000cd12 EFL=00000017 [----APC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 00008280 00000027
IDT= 00000000 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
and here's without the acs thing
vfio: No available IOMMU models
vfio: failed to setup container for group 20
ummm I though this worked in the past and this acs thing was only needed
for my onboard sound to pass through correctly. Not sure what to do.
If you want me to try another setting for
pcie_acs_override=downstream, feel free to suggest.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1591628
Title:
2.6.0 hangs linux vm using vfio for pci passthrough of graphics card
Status in QEMU:
New
Bug description:
Not a duplicate of my old bug 1488363
qemu version 2.5.1 works fine
qemu version 2.6.0 fails
seabios 1.9.2-1
using kernel 4.5.5 with grsecurity
I built using the arch packaging tools, but commented out all the
patch code, so it should be vanilla.
The problem is just that I start a Linux vm using either my radeon R7
260x or radeon HD 6770, and with qemu 2.6.0, it looks normal until
after the grub menu, and then the screen looks broken (with mostly
black, and some pixely junk spread horizontally in a few places on the
screen... first we thought maybe the monitor died). I'm not sure if
it's before or only at the moment where the screen resolution changes
(I could check that or record it on request). Also, the VM is not
pingable and does not respond to "system_powerdown" on qemu monitor.
However, the same setup works fine with windows 8. And it works fine
without graphics cards passed through. A usb controller passed through
works fine too.
And then I ran a bisect...
2d82f8a3cdb276bc3cb92d6f01bf8f66bf328d62 is the first bad commit
commit 2d82f8a3cdb276bc3cb92d6f01bf8f66bf328d62
Author: Alex Williamson <alex.william...@redhat.com>
Date: Thu Mar 10 09:39:08 2016 -0700
vfio/pci: Convert all MemoryRegion to dynamic alloc and
consistent functions
Match common vfio code with setup, exit, and finalize functions
for
BAR, quirk, and VGA management. VGA is also changed to dynamic
allocation to match the other MemoryRegions.
Signed-off-by: Alex Williamson <alex.william...@redhat.com>
:040000 040000 0acfd49b6ecae780b6f52a34080ecec6b3ec3672
e0cfdadede08f553463c0b23931eda81107f41b8 M hw
then confirm it by reverting that commit
git checkout v2.6.0
git revert 2d82f8a3cdb276bc3cb92d6f01bf8f66bf328d62
git mergetool -t kdiff3
"select all from C", save
not sure if this is the right way to do this...but it compiles
and works (bug fixed)
git commit -m "revert 2d82f8a3cdb276bc3cb92d6f01bf8f66bf328d62
resolve conflicts"
And that 2.6.0 build with that one patch reverted works fine.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1591628/+subscriptions
