This patch series is based on Peter C's original register API. His
original cover letter is below.
Future work: Allow support for memory attributes.
V6:
- Small changes to the API based on Alex's comments
- Remove 'register: Add support for decoding information' patch
- Move prefix and debug into the RegisterInfoArray as it is the same
for every register.
V5:
- Only create a single memory region instead of a memory region for
each register
- General tidyups based on Alex's comments
V4:
- Rebase and fix build issue
- Simplify the register write logic
- Other small fixes suggested by Alex Bennee
V3:
- Small changes reported by Fred
V2:
- Rebase
- Fix up IOU SLCR connections
- Add the memory_region_add_subregion_no_print() function and use it
for the registers
Changes since RFC:
- Connect the ZynqMP IOU SLCR device
- Rebase
Original cover letter From Peter:
Hi All. This is a new scheme I've come up with handling device registers in a
data driven way. My motivation for this is to factor out a lot of the access
checking that seems to be replicated in every device. See P1 commit message for
further discussion.
P1 is the main patch, adds the register definition functionality
P2-3,6 add helpers that glue the register API to the Memory API
P4 Defines a set of macros that minimise register and field definitions
P5 is QOMfication
P7 is a trivial
P10-13 Work up to GPIO support
P8,9,14 add new devices (the Xilinx Zynq devcfg & ZynqMP SLCR) that use this
scheme.
P15: Connect the ZynqMP SLCR device
This Zynq devcfg device was particularly finnicky with per-bit restrictions.
I'm also looking for a higher-than-usual modelling fidelity
on the register space, with semantics defined for random reserved bits
in-between otherwise consistent fields.
Here's an example of the qemu_log output for the devcfg device. This is produced
by now generic sharable code:
/machine/unattached/device[44]:Addr 0x000008:CFG: write of value 00000508
/machine/unattached/device[44]:Addr 0x000080:MCTRL: write of value 00800010
/machine/unattached/device[44]:Addr 0x000010:INT_MASK: write of value ffffffff
/machine/unattached/device[44]:Addr 00000000:CTRL: write of value 0c00607f
And an example of a rogue guest banging on a bad bit:
/machine/unattached/device[44]:Addr 0x000014:STATUS bits 0x000001 may not be \
written to 1
A future feature I am interested in is implementing TCG optimisation of
side-effectless registers. The register API allows clear definition of
what registers have txn side effects and which ones don't. You could even
go a step further and translate such side-effectless accesses based on the
data pointer for the register.
Alistair Francis (6):
bitops: Add MAKE_64BIT_MASK macro
register: Add Register API
register: Add Memory API glue
dma: Add Xilinx Zynq devcfg device model
register: Add GPIO API
xlnx-zynqmp: Connect the ZynqMP IOU SLCR
Peter Crosthwaite (7):
register: Define REG and FIELD macros
register: QOMify
register: Add block initialise helper
xilinx_zynq: Connect devcfg to the Zynq machine model
qdev: Define qdev_get_gpio_out
irq: Add opaque setter routine
misc: Introduce ZynqMP IOU SLCR
default-configs/arm-softmmu.mak | 1 +
hw/arm/xilinx_zynq.c | 8 +
hw/arm/xlnx-zynqmp.c | 13 ++
hw/core/Makefile.objs | 1 +
hw/core/irq.c | 5 +
hw/core/qdev.c | 12 +
hw/core/register.c | 376 +++++++++++++++++++++++++++++++
hw/dma/Makefile.objs | 1 +
hw/dma/xlnx-zynq-devcfg.c | 396 +++++++++++++++++++++++++++++++++
hw/misc/Makefile.objs | 1 +
hw/misc/xlnx-zynqmp-iou-slcr.c | 115 ++++++++++
include/hw/arm/xlnx-zynqmp.h | 2 +
include/hw/dma/xlnx-zynq-devcfg.h | 62 ++++++
include/hw/irq.h | 2 +
include/hw/misc/xlnx-zynqmp-iou-slcr.h | 47 ++++
include/hw/qdev-core.h | 2 +
include/hw/register.h | 262 ++++++++++++++++++++++
include/qemu/bitops.h | 3 +
18 files changed, 1309 insertions(+)
create mode 100644 hw/core/register.c
create mode 100644 hw/dma/xlnx-zynq-devcfg.c
create mode 100644 hw/misc/xlnx-zynqmp-iou-slcr.c
create mode 100644 include/hw/dma/xlnx-zynq-devcfg.h
create mode 100644 include/hw/misc/xlnx-zynqmp-iou-slcr.h
create mode 100644 include/hw/register.h
--
2.7.4
