The new feature for qcow2: storing bitmaps.
Only bitmaps, relative to the virtual disk, stored in qcow2 file, should
be stored in this qcow2 file.
Strings started from +# are RFC-strings, not to be commited of course
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsement...@virtuozzo.com>
---
v5:
- 'Dirty bitmaps' renamed to 'Bitmaps', as we may have several types of
bitmaps.
- rewordings
- move upper bounds to "Notes about Qemu limits"
- s/should/must somewhere. (but not everywhere)
- move name_size field closer to name itself in bitmap header
- add extra data area to bitmap header
- move bitmap data description to separate section
docs/specs/qcow2.txt | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 159 insertions(+), 1 deletion(-)
diff --git a/docs/specs/qcow2.txt b/docs/specs/qcow2.txt
index 121dfc8..3d557ee 100644
--- a/docs/specs/qcow2.txt
+++ b/docs/specs/qcow2.txt
@@ -103,7 +103,19 @@ in the description of a field.
write to an image with unknown auto-clear features if it
clears the respective bits from this field first.
- Bits 0-63: Reserved (set to 0)
+ Bit 0: Bitmaps extension bit.
+ This bit is responsible for Bitmaps extension
+ consistency.
+
+ If it is set, but there is no Bitmaps
+ extension, this should be considered as an
+ error.
+
+ If it is not set, but there is a Bitmaps
+ extension, its data should be considered as
+ inconsistent.
+
+ Bits 1-63: Reserved (set to 0)
96 - 99: refcount_order
Describes the width of a reference count block entry (width
@@ -123,6 +135,7 @@ be stored. Each extension has a structure like the
following:
0x00000000 - End of the header extension area
0xE2792ACA - Backing file format name
0x6803f857 - Feature name table
+ 0x23852875 - Bitmaps extension
other - Unknown header extension, can be safely
ignored
@@ -166,6 +179,34 @@ the header extension data. Each entry look like this:
terminated if it has full length)
+== Bitmaps extension ==
+
+Bitmaps extension is an optional header extension. It provides an ability to
+store virtual disk related bitmaps in a qcow2 image. For now there is only one
+type of such bitmaps: Dirty Tracking Bitmap, which just tracks virtual disk
+changes from some moment.
+
+The data of the extension should be considered as consistent only if
+corresponding auto-clear feature bit is set (see autoclear_features above).
+
+The fields of Bitmaps extension are:
+
+ 0 - 3: nb_bitmaps
+ The number of bitmaps contained in the image. Must be
+ greater or equal to 1.
+
+ Note: Qemu currently only supports up to 65535 bitmaps per
+ image.
+
+ 4 - 7: bitmap_directory_size
+ Size of the Bitmap Directory in bytes. It must be equal to
+ sum of sizes of all (nb_bitmaps) bitmap headers.
+
+ 8 - 15: bitmap_directory_offset
+ Offset into the image file at which the Bitmap Directory
+ starts. Must be aligned to a cluster boundary.
+
+
== Host cluster management ==
qcow2 manages the allocation of host clusters by maintaining a reference count
@@ -360,3 +401,120 @@ Snapshot table entry:
variable: Padding to round up the snapshot table entry size to the
next multiple of 8.
+
+
+== Bitmaps ==
+
+The feature supports storing bitmaps in a qcow2 image. All bitmaps are related
+to the virtual disk, stored in this image.
+
+=== Bitmap Directory ===
+
+Each bitmap saved in the image is described in a Bitmap Directory entry. Bitmap
+Directory is a contiguous area in the image file, whose starting offset and
+length are given by the header extension fields bitmap_directory_offset and
+bitmap_directory_size. The entries of the bitmap directory have variable
+length, depending on the length of the bitmap name and extra data. These
+entries are also called bitmap headers.
+
+Bitmap Directory Entry:
+
+ Byte 0 - 7: bitmap_table_offset
+ Offset into the image file at which the Bitmap Table
+ (described below) for the bitmap starts. Must be aligned to
+ a cluster boundary.
+
+ 8 - 11: bitmap_table_size
+ Number of entries in the Bitmap Table of the bitmap.
+
+ 12 - 15: flags
+ Bit
+ 0: in_use
+ The bitmap was not saved correctly and may be
+ inconsistent.
+
+ 1: auto
+ The bitmap must reflect all changes of the virtual
+ disk by any application that would write to this qcow2
+ file (including writes, snapshot switching, etc.). The
+ type of this bitmap must be 'Dirty Tracking Bitmap'.
+
+ Bits 2 - 31 are reserved and must be 0.
+
+ 16: type
+ This field describes the sort of the bitmap.
+ Values:
+ 0: Dirty Tracking Bitmap
+
+ Values 1 - 255 are reserved.
+# Is there any reason, to make it '1 - Dirty Tracking Bitmap, 0,2-255 -
reserved?'
+
+ 17: granularity_bits
+ Granularity bits. Valid values are: 0 - 63.
+
+ Note: Qemu currently doesn't support granularity_bits
+ greater than 31.
+
+ Granularity is calculated as
+ granularity = 1 << granularity_bits
+
+ Granularity of the bitmap is how many bytes of the image
+ accounts for one bit of the bitmap.
+
+ 18 - 19: name_size
+ Size of the bitmap name. Valid values: 1 - 1023.
+
+ 20 - 21: extra_data_size
+ Size of type-specific extra data.
+# 2 bytes or 4 bytes ?
+
+ variable: The name of the bitmap (not null terminated). Must be
+ unique among all bitmap names within the Bitmaps extension.
+
+ variable: Type-specific extra data for the bitmap.
+
+ variable: Padding to round up the Bitmap Directory Entry size to the
+ next multiple of 8.
+
+=== Bitmap Table ===
+
+Bitmaps are stored using a one-level (not two-level like refcounts and guest
+clusters mapping) structure for the mapping of bitmaps data to host clusters.
+It is called Bitmap Table.
+
+Each Bitmap Table has a variable size (stored in the Bitmap Directory Entry)
+and may use multiple clusters, however it must be contiguous in the image file.
+
+Bitmap Table entry:
+
+ Bit 0: Reserved and must be zero if bits 9 - 55 are non-zero.
+ If bits 9 - 55 are zero:
+ 0: Cluster should be read as all zeros.
+ 1: Cluster should be read as all ones.
+
+ 1 - 8: Reserved and must be zero.
+
+ 9 - 55: Bits 9 - 55 of host cluster offset. Must be aligned to a
+ cluster boundary. If the offset is 0, the cluster is
+ unallocated, see bit 0 description.
+
+ 56 - 63: Reserved and must be zero.
+
+=== Bitmap Data ===
+
+As noted above, bitmap data is stored in several (or may be one, exactly
+bitmap_table_size) separate clusters, described by Bitmap Table. Given an
+offset (in bytes) into the bitmap data, the offset into the image file can be
+obtained as follows:
+
+ image_offset =
+ bitmap_table[bitmap_data_offset / cluster_size] +
+ (bitmap_data_offset % cluster_size)
+
+Taking into account the granularity of the bitmap, an offset in bits into the
+image file, corresponding to byte number byte_nr of the virtual disk can be
+calculated like this:
+
+ bit_offset =
+ image_offset(byte_nr / granularity / 8) * 8 +
+ (byte_nr / granularity) % 8
--
2.1.4
