[Qemu-devel] [PATCH 06/12] 4byte address mode support added.

[marcin . krzeminski]

From: Marcin Krzeminski <marcin.krzemin...@nokia.com>

Signed-off-by: Marcin Krzeminski <marcin.krzemin...@nokia.com>
---
 hw/block/m25p80.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 1a547ae..6d5d90d 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -237,6 +237,9 @@ typedef enum {
     ERASE_32K = 0x52,
     ERASE_SECTOR = 0xd8,
 
+    EN_4BYTE_ADDR = 0xB7,
+    EX_4BYTE_ADDR = 0xE9,
+
     RESET_ENABLE = 0x66,
     RESET_MEMORY = 0x99,
 
@@ -267,6 +270,7 @@ typedef struct Flash {
     uint8_t cmd_in_progress;
     uint64_t cur_addr;
     bool write_enable;
+    bool four_bytes_address_mode;
     bool reset_enable;
     bool initialized;
     uint8_t reset_pin;
@@ -405,11 +409,24 @@ void flash_write8(Flash *s, uint64_t addr, uint8_t data)
     s->dirty_page = page;
 }
 
+static inline int is_4bytes(Flash *s)
+{
+       return s->four_bytes_address_mode;
+   }
+}
+
 static void complete_collecting_data(Flash *s)
 {
-    s->cur_addr = s->data[0] << 16;
-    s->cur_addr |= s->data[1] << 8;
-    s->cur_addr |= s->data[2];
+    if (is_4bytes(s)) {
+        s->cur_addr = s->data[0] << 24;
+        s->cur_addr |= s->data[1] << 16;
+        s->cur_addr |= s->data[2] << 8;
+        s->cur_addr |= s->data[3];
+    } else {
+        s->cur_addr = s->data[0] << 16;
+        s->cur_addr |= s->data[1] << 8;
+        s->cur_addr |= s->data[2];
+    }
 
     s->state = STATE_IDLE;
 
@@ -446,6 +463,7 @@ static void reset_memory(Flash *s)
 {
     s->cmd_in_progress = NOP;
     s->cur_addr = 0;
+    s->four_bytes_address_mode = false;
     s->len = 0;
     s->needed_bytes = 0;
     s->pos = 0;
@@ -565,6 +583,12 @@ static void decode_new_cmd(Flash *s, uint32_t value)
         break;
     case NOP:
         break;
+    case EN_4BYTE_ADDR:
+        s->four_bytes_address_mode = true;
+        break;
+    case EX_4BYTE_ADDR:
+        s->four_bytes_address_mode = false;
+        break;
     case RESET_ENABLE:
         s->reset_enable = true;
         break;
@@ -715,6 +739,7 @@ static const VMStateDescription vmstate_m25p80 = {
         VMSTATE_UINT8(cmd_in_progress, Flash),
         VMSTATE_UINT64(cur_addr, Flash),
         VMSTATE_BOOL(write_enable, Flash),
+        VMSTATE_BOOL(four_bytes_address_mode, Flash),
         VMSTATE_BOOL(reset_enable, Flash),
         VMSTATE_BOOL(initialized, Flash),
         VMSTATE_UINT8(reset_pin, Flash),
-- 
2.5.0