On Sun, Sep 27, 2015 at 10:16 AM, Max Filippov <jcmvb...@gmail.com> wrote:
> XTFPGA FLASH is tied to XTFPGA system IO block. It's not very important
> for systems with MMU where system IO block is visible at single
> location,
Are your relying on a matching change in the guest for MMU setup here?
Can you explain a little more how the MMU allows a physical address
remap of the underlying hardware as this looks like a non
backwards-compatible board design rev.
Regards,
Peter
but it's important for noMMU systems, where system IO block is
> accessible through two separate physical address ranges.
>
> Map XTFPGA FLASH to system IO block and fix offsets used for mapping.
>
> Signed-off-by: Max Filippov <jcmvb...@gmail.com>
> ---
> hw/xtensa/xtfpga.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/hw/xtensa/xtfpga.c b/hw/xtensa/xtfpga.c
> index 72350f1..d4b9afb 100644
> --- a/hw/xtensa/xtfpga.c
> +++ b/hw/xtensa/xtfpga.c
> @@ -247,16 +247,20 @@ static void lx_init(const LxBoardDesc *board,
> MachineState *machine)
>
> dinfo = drive_get(IF_PFLASH, 0, 0);
> if (dinfo) {
> - flash = pflash_cfi01_register(board->flash_base,
> - NULL, "lx60.io.flash", board->flash_size,
> - blk_by_legacy_dinfo(dinfo),
> - board->flash_sector_size,
> - board->flash_size / board->flash_sector_size,
> - 4, 0x0000, 0x0000, 0x0000, 0x0000, be);
> + SysBusDevice *s;
> +
> + flash = pflash_cfi01_init(NULL, "lx60.io.flash", board->flash_size,
> + blk_by_legacy_dinfo(dinfo),
> + board->flash_sector_size,
> + board->flash_size /
> board->flash_sector_size,
> + 4, 0x0000, 0x0000, 0x0000, 0x0000, be);
> if (flash == NULL) {
> error_report("unable to mount pflash");
> exit(EXIT_FAILURE);
> }
> + s = SYS_BUS_DEVICE(flash);
> + memory_region_add_subregion(system_io, board->flash_base,
> + sysbus_mmio_get_region(s, 0));
> }
>
> /* Use presence of kernel file name as 'boot from SRAM' switch. */
> @@ -386,7 +390,7 @@ static void lx_init(const LxBoardDesc *board,
> MachineState *machine)
> static void xtensa_lx60_init(MachineState *machine)
> {
> static const LxBoardDesc lx60_board = {
> - .flash_base = 0xf8000000,
> + .flash_base = 0x08000000,
> .flash_size = 0x00400000,
> .flash_sector_size = 0x10000,
> .sram_size = 0x20000,
> @@ -397,7 +401,7 @@ static void xtensa_lx60_init(MachineState *machine)
> static void xtensa_lx200_init(MachineState *machine)
> {
> static const LxBoardDesc lx200_board = {
> - .flash_base = 0xf8000000,
> + .flash_base = 0x08000000,
> .flash_size = 0x01000000,
> .flash_sector_size = 0x20000,
> .sram_size = 0x2000000,
> @@ -408,7 +412,7 @@ static void xtensa_lx200_init(MachineState *machine)
> static void xtensa_ml605_init(MachineState *machine)
> {
> static const LxBoardDesc ml605_board = {
> - .flash_base = 0xf8000000,
> + .flash_base = 0x08000000,
> .flash_size = 0x01000000,
> .flash_sector_size = 0x20000,
> .sram_size = 0x2000000,
> @@ -419,7 +423,7 @@ static void xtensa_ml605_init(MachineState *machine)
> static void xtensa_kc705_init(MachineState *machine)
> {
> static const LxBoardDesc kc705_board = {
> - .flash_base = 0xf0000000,
> + .flash_base = 0x00000000,
> .flash_size = 0x08000000,
> .flash_boot_base = 0x06000000,
> .flash_sector_size = 0x20000,
> --
> 1.8.1.4
>
>
