On Wed, Sep 23, 2015 at 12:10:46PM +0200, Thomas Huth wrote:
> On 17/09/15 15:09, David Gibson wrote:
> > The current vfio core code assumes that the host IOMMU is capable of
> > mapping any IOVA the guest wants to use to where we need. However, real
> > IOMMUs generally only support translating a certain range of IOVAs (the
> > "DMA window") not a full 64-bit address space.
> >
> > The common x86 IOMMUs support a wide enough range that guests are very
> > unlikely to go beyond it in practice, however the IOMMU used on IBM Power
> > machines - in the default configuration - supports only a much more limited
> > IOVA range, usually 0..2GiB.
> >
> > If the guest attempts to set up an IOVA range that the host IOMMU can't
> > map, qemu won't report an error until it actually attempts to map a bad
> > IOVA. If guest RAM is being mapped directly into the IOMMU (i.e. no guest
> > visible IOMMU) then this will show up very quickly. If there is a guest
> > visible IOMMU, however, the problem might not show up until much later when
> > the guest actually attempt to DMA with an IOVA the host can't handle.
> >
> > This patch adds a test so that we will detect earlier if the guest is
> > attempting to use IOVA ranges that the host IOMMU won't be able to deal
> > with.
> >
> > For now, we assume that "Type1" (x86) IOMMUs can support any IOVA, this is
> > incorrect, but no worse than what we have already. We can't do better for
> > now because the Type1 kernel interface doesn't tell us what IOVA range the
> > IOMMU actually supports.
> >
> > For the Power "sPAPR TCE" IOMMU, however, we can retrieve the supported
> > IOVA range and validate guest IOVA ranges against it, and this patch does
> > so.
> >
> > Signed-off-by: David Gibson <da...@gibson.dropbear.id.au>
> > ---
> > hw/vfio/common.c | 42
> > +++++++++++++++++++++++++++++++++++++++---
> > include/hw/vfio/vfio-common.h | 6 ++++++
> > 2 files changed, 45 insertions(+), 3 deletions(-)
> >
> > diff --git a/hw/vfio/common.c b/hw/vfio/common.c
> > index 9953b9c..c37f1a1 100644
> > --- a/hw/vfio/common.c
> > +++ b/hw/vfio/common.c
> > @@ -344,14 +344,23 @@ static void vfio_listener_region_add(MemoryListener
> > *listener,
> > if (int128_ge(int128_make64(iova), llend)) {
> > return;
> > }
> > + end = int128_get64(llend);
> > +
> > + if ((iova < container->iommu_data.min_iova)
> > + || ((end - 1) > container->iommu_data.max_iova)) {
>
> (Too much paranthesis for my taste ;-))
Yes, well, we've already established our tastes differ on that point.
> > + error_report("vfio: IOMMU container %p can't map guest IOVA region"
> > + " 0x%"HWADDR_PRIx"..0x%"HWADDR_PRIx,
> > + container, iova, end - 1);
> > + ret = -EFAULT; /* FIXME: better choice here? */
>
> Maybe -EINVAL? ... but -EFAULT also sounds ok for me.
I try to avoid EINVAL unless it's clearly the only right choice. So
many things use it that it tends to be very unhelpful when you get one.
> > + goto fail;
> > + }
> ...
> > @@ -712,6 +732,22 @@ static int vfio_connect_container(VFIOGroup *group,
> > AddressSpace *as)
> > ret = -errno;
> > goto free_container_exit;
> > }
> > +
> > + /*
> > + * FIXME: This only considers the host IOMMU' 32-bit window.
> > + * At some point we need to add support for the optional
> > + * 64-bit window and dynamic windows
> > + */
> > + info.argsz = sizeof(info);
> > + ret = ioctl(fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
> > + if (ret) {
> > + error_report("vfio: VFIO_IOMMU_SPAPR_TCE_GET_INFO failed: %m");
>
> Isn't that %m a glibc extension only? ... Well, this code likely only
> runs on Linux with a glibc, so it likely doesn't matter, I guess...
Yes, it is, but it's already used extensively within qemu.
> > + ret = -errno;
> > + goto free_container_exit;
> > + }
> > + container->iommu_data.min_iova = info.dma32_window_start;
> > + container->iommu_data.max_iova = container->iommu_data.min_iova
> > + + info.dma32_window_size - 1;
> > } else {
> > error_report("vfio: No available IOMMU models");
> > ret = -EINVAL;
> > diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> > index aff18cd..88ec213 100644
> > --- a/include/hw/vfio/vfio-common.h
> > +++ b/include/hw/vfio/vfio-common.h
> > @@ -71,6 +71,12 @@ typedef struct VFIOContainer {
> > MemoryListener listener;
> > int error;
> > bool initialized;
> > + /*
> > + * FIXME: This assumes the host IOMMU can support only a
> > + * single contiguous IOVA window. We may need to generalize
> > + * that in future
> > + */
> > + hwaddr min_iova, max_iova;
>
> Should that maybe be dma_addr_t instead of hwaddr ?
Ah, yes it probably should.
> > } iommu_data;
> > QLIST_HEAD(, VFIOGuestIOMMU) giommu_list;
> > QLIST_HEAD(, VFIOGroup) group_list;
> >
>
> Thomas
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgpCCyha_TXnf.pgp
Description: PGP signature
