On Wed, 09/16 17:29, Paolo Bonzini wrote:
> Passed-through SCSI devices can be opened with the readonly=on option.
> When this happens, Linux filters away write commands so that the guest
> cannot overwrite the contents of the device.
>
> However, the guest does not know that the device is read-only, and
> accepts writes. The writes only fail later when the page cache is
> flushed.
>
> This patch modifies scsi-generic to modify the MODE SENSE data and
> set the read-only bit in the device-specific parameters, so that
> the guest OS treats the disk as write protected.
>
> Signed-off-by: Paolo Bonzini <pbonz...@redhat.com>
> ---
> hw/scsi/scsi-generic.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
> index 1b6350b..a4626f7 100644
> --- a/hw/scsi/scsi-generic.c
> +++ b/hw/scsi/scsi-generic.c
> @@ -210,6 +210,20 @@ static void scsi_read_complete(void * opaque, int ret)
> }
> blk_set_guest_block_size(s->conf.blk, s->blocksize);
>
> + /* Patch MODE SENSE device specific parameters if the BDS is opened
> + * readonly.
> + */
> + if ((s->type == TYPE_DISK || s->type == TYPE_TAPE) &&
> + blk_is_read_only(s->conf.blk) &&
> + (r->req.cmd.buf[0] == MODE_SENSE ||
> + r->req.cmd.buf[0] == MODE_SENSE_10) &&
> + (r->req.cmd.buf[1] & 0x8) == 0) {
> + if (r->req.cmd.buf[0] == MODE_SENSE) {
> + r->buf[2] |= 0x80;
> + } else {
> + r->buf[3] |= 0x80;
> + }
> + }
> scsi_req_data(&r->req, len);
> scsi_req_unref(&r->req);
> }
> --
> 2.5.0
>
>
Reviewed-by: Fam Zheng <f...@redhat.com>
