Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using qemu machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Signed-off-by: Guenter Roeck <li...@roeck-us.net>
---
v2: Use extract32()
Merge zynq_xadc_reset() and _zynq_xadc_reset() into one function
Use "xlnx,zynq_xadc"
Move device model to include/hw/misc/zynq_xadc.h
irq -> qemu_irq
xadc_dfifo_depth -> xadc_dfifo_entries
Dropped unnecessary comments
Merged zynq_xadc_realize() into zynq_xadc_init()
hw/arm/xilinx_zynq.c | 6 +
hw/misc/Makefile.objs | 1 +
hw/misc/zynq_xadc.c | 270 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/misc/zynq_xadc.h | 49 ++++++++
4 files changed, 326 insertions(+)
create mode 100644 hw/misc/zynq_xadc.c
create mode 100644 include/hw/misc/zynq_xadc.h
diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index a4e7b5c..f933f81 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -24,6 +24,7 @@
#include "hw/block/flash.h"
#include "sysemu/block-backend.h"
#include "hw/loader.h"
+#include "hw/misc/zynq_xadc.h"
#include "hw/ssi.h"
#include "qemu/error-report.h"
@@ -225,6 +226,11 @@ static void zynq_init(MachineState *machine)
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
+ dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]);
+
dev = qdev_create(NULL, "pl330");
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 4aa76ff..5f76f05 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -36,6 +36,7 @@ obj-$(CONFIG_OMAP) += omap_sdrc.o
obj-$(CONFIG_OMAP) += omap_tap.o
obj-$(CONFIG_SLAVIO) += slavio_misc.o
obj-$(CONFIG_ZYNQ) += zynq_slcr.o
+obj-$(CONFIG_ZYNQ) += zynq_xadc.o
obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o
obj-$(CONFIG_PVPANIC) += pvpanic.o
diff --git a/hw/misc/zynq_xadc.c b/hw/misc/zynq_xadc.c
new file mode 100644
index 0000000..dc67b73
--- /dev/null
+++ b/hw/misc/zynq_xadc.c
@@ -0,0 +1,270 @@
+/*
+ * ADC registers for Xilinx Zynq Platform
+ *
+ * Copyright (c) 2015 Guenter Roeck
+ * Based on hw/misc/zynq_slcr.c, written by Michal Simek
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/hw.h"
+#include "hw/misc/zynq_xadc.h"
+#include "qemu/timer.h"
+#include "sysemu/sysemu.h"
+
+enum {
+ CFG = 0x000 / 4,
+ INTSTS,
+ INTMSK,
+ STATUS,
+ CFIFO,
+ DFIFO,
+ CTL,
+};
+
+#define XADC_ZYNQ_CFG_ENABLE BIT(31)
+#define XADC_ZYNQ_CFG_CFIFOTH_RD(x) (((x) >> 20) & 0x0f)
+#define XADC_ZYNQ_CFG_DFIFOTH_RD(x) (((x) >> 16) & 0x0f)
+#define XADC_ZYNQ_CFG_WEDGE BIT(13)
+#define XADC_ZYNQ_CFG_REDGE BIT(12)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV2 (0x0 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV4 (0x1 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV8 (0x2 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV16 (0x3 << 8)
+#define XADC_ZYNQ_CFG_IGAP_MASK 0x1f
+#define XADC_ZYNQ_CFG_IGAP(x) ((x) & XADC_ZYNQ_CFG_IGAP_MASK)
+
+#define XADC_ZYNQ_INT_CFIFO_LTH BIT(9)
+#define XADC_ZYNQ_INT_DFIFO_GTH BIT(8)
+#define XADC_ZYNQ_INT_ALARM_MASK 0xff
+#define XADC_ZYNQ_INT_ALARM_OFFSET 0
+
+#define XADC_ZYNQ_STATUS_DFIFO_LVL(x) (((x) & 0x0f) << 12)
+#define XADC_ZYNQ_STATUS_CFIFOF BIT(11)
+#define XADC_ZYNQ_STATUS_CFIFOE BIT(10)
+#define XADC_ZYNQ_STATUS_DFIFOF BIT(9)
+#define XADC_ZYNQ_STATUS_DFIFOE BIT(8)
+#define XADC_ZYNQ_STATUS_OT BIT(7)
+#define XADC_ZYNQ_STATUS_ALM(x) BIT(x)
+
+#define XADC_ZYNQ_CTL_RESET BIT(4)
+
+#define XADC_ZYNQ_CMD_NOP 0x00
+#define XADC_ZYNQ_CMD_READ 0x01
+#define XADC_ZYNQ_CMD_WRITE 0x02
+
+static void zynq_xadc_reset(DeviceState *d)
+{
+ ZynqXADCState *s = ZYNQ_XADC(d);
+ int i;
+
+ s->regs[CFG] = XADC_ZYNQ_CFG_IGAP(0x14) | XADC_ZYNQ_CFG_TCKRATE_DIV4 |
+ XADC_ZYNQ_CFG_REDGE;
+ s->regs[INTSTS] = XADC_ZYNQ_INT_CFIFO_LTH;
+ s->regs[INTMSK] = 0xffffffff;
+ s->regs[STATUS] = 0;
+ s->regs[CFIFO] = 0;
+ s->regs[DFIFO] = 0;
+ s->regs[CTL] = XADC_ZYNQ_CTL_RESET;
+
+ for (i = 0; i < ARRAY_SIZE(s->xadc_regs); i++) {
+ s->xadc_regs[i] = 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(s->xadc_dfifo); i++) {
+ s->xadc_dfifo[i] = 0;
+ }
+ s->xadc_dfifo_entries = 0;
+}
+
+static bool zynq_xadc_check_offset(hwaddr offset, bool rnw)
+{
+ switch (offset) {
+ case CFG:
+ case INTMSK:
+ case INTSTS:
+ case CTL:
+ return true;
+ case DFIFO:
+ case STATUS:
+ return rnw; /* read only */
+ case CFIFO:
+ return !rnw; /* write only */
+ default:
+ return false;
+ }
+}
+
+static void zynq_xadc_update_ints(ZynqXADCState *s)
+{
+ qemu_set_irq(s->qemu_irq, !!(s->regs[INTSTS] & ~s->regs[INTMSK]));
+}
+
+static uint64_t zynq_xadc_read(void *opaque, hwaddr offset, unsigned size)
+{
+ ZynqXADCState *s = opaque;
+ int reg = offset / 4;
+ uint64_t rv = 0;
+ int i;
+
+ if (!zynq_xadc_check_offset(reg, true)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "zynq_xadc: Invalid read access to "
+ " addr %" HWADDR_PRIx "\n", offset);
+ }
+
+ switch (reg) {
+ case CFG:
+ case INTMSK:
+ case INTSTS:
+ case CTL:
+ rv = s->regs[reg];
+ break;
+ case STATUS:
+ rv = XADC_ZYNQ_STATUS_CFIFOE;
+ rv |= XADC_ZYNQ_STATUS_DFIFO_LVL(s->xadc_dfifo_entries);
+ if (!s->xadc_dfifo_entries) {
+ rv |= XADC_ZYNQ_STATUS_DFIFOE;
+ } else if (s->xadc_dfifo_entries >= ARRAY_SIZE(s->xadc_dfifo)) {
+ rv |= XADC_ZYNQ_STATUS_DFIFOF;
+ }
+ break;
+ case DFIFO:
+ rv = s->xadc_dfifo[0];
+ if (s->xadc_dfifo_entries > 0) {
+ s->xadc_dfifo_entries--;
+ }
+ for (i = 0; i < s->xadc_dfifo_entries; i++) {
+ s->xadc_dfifo[i] = s->xadc_dfifo[i + 1];
+ }
+ s->xadc_dfifo[s->xadc_dfifo_entries] = 0;
+ zynq_xadc_update_ints(s);
+ break;
+ }
+ return rv;
+}
+
+static void xadc_add_dfifo(ZynqXADCState *s, uint16_t regval)
+{
+ if (s->xadc_dfifo_entries < ARRAY_SIZE(s->xadc_dfifo)) {
+ s->xadc_dfifo[s->xadc_dfifo_entries++] = s->xadc_read_reg_previous;
+ }
+ s->xadc_read_reg_previous = regval;
+ if (s->xadc_dfifo_entries > XADC_ZYNQ_CFG_DFIFOTH_RD(s->regs[CFG])) {
+ s->regs[INTSTS] |= XADC_ZYNQ_INT_DFIFO_GTH;
+ }
+ zynq_xadc_update_ints(s);
+}
+
+static void zynq_xadc_write(void *opaque, hwaddr offset, uint64_t val,
+ unsigned size)
+{
+ ZynqXADCState *s = (ZynqXADCState *)opaque;
+ int reg = offset / 4;
+ int xadc_reg;
+ int xadc_cmd;
+ int xadc_data;
+
+ if (!zynq_xadc_check_offset(reg, false)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "zynq_xadc: Invalid write access to "
+ "addr %" HWADDR_PRIx "\n", offset);
+ return;
+ }
+
+ switch (reg) {
+ case CFG:
+ s->regs[CFG] = val;
+ break;
+ case INTSTS:
+ s->regs[INTSTS] &= ~val;
+ zynq_xadc_update_ints(s);
+ break;
+ case INTMSK:
+ s->regs[INTMSK] = val & 0x003ff;
+ zynq_xadc_update_ints(s);
+ break;
+ case CFIFO:
+ xadc_cmd = extract32(val, 26, 4);
+ xadc_reg = extract32(val, 16, 7);
+ xadc_data = extract32(val, 0, 16);
+
+ switch (xadc_cmd) {
+ case XADC_ZYNQ_CMD_READ:
+ xadc_add_dfifo(s, s->xadc_regs[xadc_reg]);
+ break;
+ case XADC_ZYNQ_CMD_WRITE:
+ s->xadc_regs[xadc_reg] = xadc_data;
+ break;
+ case XADC_ZYNQ_CMD_NOP:
+ xadc_add_dfifo(s, 0);
+ break;
+ }
+ s->regs[INTSTS] |= XADC_ZYNQ_INT_CFIFO_LTH;
+ zynq_xadc_update_ints(s);
+ break;
+ case CTL:
+ if (val & XADC_ZYNQ_CTL_RESET) {
+ zynq_xadc_reset(DEVICE(s));
+ }
+ s->regs[CTL] = val & 0x00fffeff;
+ break;
+ }
+}
+
+static const MemoryRegionOps xadc_ops = {
+ .read = zynq_xadc_read,
+ .write = zynq_xadc_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void zynq_xadc_init(Object *obj)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ ZynqXADCState *s = ZYNQ_XADC(obj);
+
+ memory_region_init_io(&s->iomem, obj, &xadc_ops, s, "xadc",
+ ZYNQ_XADC_MMIO_SIZE);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(sbd, &s->qemu_irq);
+}
+
+static const VMStateDescription vmstate_zynq_xadc = {
+ .name = "zynq_xadc",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, ZynqXADCState, ZYNQ_XADC_NUM_IO_REGS),
+ VMSTATE_UINT16_ARRAY(xadc_regs, ZynqXADCState, ZYNQ_XADC_NUM_ADC_REGS),
+ VMSTATE_UINT16_ARRAY(xadc_dfifo, ZynqXADCState, ZYNQ_XADC_FIFO_DEPTH),
+ VMSTATE_UINT16(xadc_read_reg_previous, ZynqXADCState),
+ VMSTATE_UINT16(xadc_dfifo_entries, ZynqXADCState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void zynq_xadc_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->vmsd = &vmstate_zynq_xadc;
+ dc->reset = zynq_xadc_reset;
+}
+
+static const TypeInfo zynq_xadc_info = {
+ .class_init = zynq_xadc_class_init,
+ .name = TYPE_ZYNQ_XADC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(ZynqXADCState),
+ .instance_init = zynq_xadc_init,
+};
+
+static void zynq_xadc_register_types(void)
+{
+ type_register_static(&zynq_xadc_info);
+}
+
+type_init(zynq_xadc_register_types)
diff --git a/include/hw/misc/zynq_xadc.h b/include/hw/misc/zynq_xadc.h
new file mode 100644
index 0000000..495be06
--- /dev/null
+++ b/include/hw/misc/zynq_xadc.h
@@ -0,0 +1,49 @@
+/*---------------------------------------------------------------------------
+ *
+ * Device model for Zynq ADC controller
+ *
+ * Copyright (c) 2015 Guenter Roeck <li...@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *---------------------------------------------------------------------------
+ */
+
+#ifndef ZYNQ_XADC_H
+#define ZYNQ_XADC_H
+
+#include "hw/sysbus.h"
+
+#define ZYNQ_XADC_MMIO_SIZE 0x0020
+#define ZYNQ_XADC_NUM_IO_REGS (ZYNQ_XADC_MMIO_SIZE / 4)
+#define ZYNQ_XADC_NUM_ADC_REGS 128
+#define ZYNQ_XADC_FIFO_DEPTH 15
+
+#define TYPE_ZYNQ_XADC "xlnx,zynq_xadc"
+#define ZYNQ_XADC(obj) \
+ OBJECT_CHECK(ZynqXADCState, (obj), TYPE_ZYNQ_XADC)
+
+typedef struct ZynqXADCState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion iomem;
+
+ uint32_t regs[ZYNQ_XADC_NUM_IO_REGS];
+ uint16_t xadc_regs[ZYNQ_XADC_NUM_ADC_REGS];
+ uint16_t xadc_read_reg_previous;
+ uint16_t xadc_dfifo[ZYNQ_XADC_FIFO_DEPTH];
+ uint16_t xadc_dfifo_entries;
+
+ struct IRQState *qemu_irq;
+
+} ZynqXADCState;
+
+#endif /* ZYNQ_XADC_H */
--
2.1.4
