From: Yi Min Zhao <zyi...@linux.vnet.ibm.com>
This patch extends the current s390 pci implementation to
provide more flexibility in configuration of s390 specific
device handling.
For each vfio pci device, I create a zpci device to store s390
specific informations. And attach all of these special zpci devices
to the s390 facility bus. A zpci device references the corresponding
PCI device via device id.
The new design allows to define multiple host bridges, each host bridge
could hold 32 zpci devices at most.
The topology for this implementation could be:
dev: s390-pcihost, id ""
bus: pci.0
type PCI
dev: vfio-pci, id "vpci1"
host = "0000:00:00.0"
......
dev: vfio-pci, id "vpci2"
host = "0001:00:00.0"
......
dev: s390-pci-facility, id ""
bus: s390-pci-fac-bus.0
type s390-pci-fac-bus
dev: zpci, id "zpci1"
fid = 1 (0x1)
uid = 2 (0x2)
pci_id = "vpci1"
dev: zpci, id "zpci2"
fid = 6 (0x6)
uid = 7 (0x7)
pci_id = "vpci2"
To make the review easier, I keep all of the old names, such as
S390PCIBusDevice to name a zpci device. I will make a cleanup
patch later to change these names to a more suitable name.
Comparing to v3, this patch does the following change:
1.Exchange vfio-pci and zpci definitions. Define zpci device firstly
then define vfio-pci device.
2.Unplug either vfio-pci device or zpci device can remove both of them.
Yi Min Zhao (1):
s390 pci infrastructure modelling
hw/s390x/s390-pci-bus.c | 323 ++++++++++++++++++++++++++++++++++----------
hw/s390x/s390-pci-bus.h | 41 +++++-
hw/s390x/s390-pci-inst.c | 12 ++-
hw/s390x/s390-virtio-ccw.c | 5 +-
4 files changed, 302 insertions(+), 79 deletions(-)
--
1.7.9
